You're in Home Hardware
See Matches in:
Narrow Search Results
Price Range
By Brand
- Prime Line Products remove
By Keyword
Best Seller | Prime-Line D 1808 1-1/4 In. Steel Ball Bearing Sliding Door Tandem Roller Assembly for Milgard (Single Pack) This is a plain back tandem roller assembly with two 1-1/4 inch concave steel ball bearing rollers. The stamped steel housing is adjustable.... more | FREE shipping go to store |
| This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. | Prime-Line Sliding Door... more | go to store |
| This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 9/16 in. wide with a 13/16 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting... more | go to store |
| This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
| Prime-Line D 1808 Sliding Door Tandem Roller Assembly Steel Ball Bearings 1-1/4 In. - Quantity 6 This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other vinyl patio door manufacturers. The housing is 3/4 in. wide and 1... more | FREE shipping go to store |
| Prime-Line D 1532 1-1/4 In. Steel Ball Bearing Sliding Roller Assembly for Fleetwood - Quantity 6 1-1/4 in. Steel Ball Bearing Sliding Roller Assembly Fleetwood. This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide 1-3/16 in. tall and 1-1/2 in. long.... more | FREE shipping go to store |
| Prime-Line D 1594 Steel Ball Bearing Sliding Patio Door Roller Assembly 1-1/2 In. - Quantity 6 Back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more | FREE shipping go to store |
| Prime-Line D 1600 Adjustable 1-1/2 In. Steel Sliding Patio Door Roller Assembly - Quantity 6 Adjustable 1-1/2-in Steel Sliding Patio Door Roller Assembly. This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide with a 7/8 in. flare and is 1-9/16 in. tall.... more | FREE shipping go to store |
| Prime-Line D 1822 1-1/2 In. Steel Ball Bearing Sliding Door Roller Assembly - Quantity 6 1-1/2 in. Steel Ball Bearing Sliding Door Roller Assembly. This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 27/32 in. flare and is 1-9/16 in.... more | FREE shipping go to store |
| 1-1/2 in. Steel Sliding Door Roller Assembly Fleetwood and Fullview. This is a plain back diecast patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is 13/16 in. wide 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20... more | FREE shipping go to store |
| 1 PK Prime-Line Sliding Door Steel Roller Assembly This patio door roller is constructed from steel. Back patio door roller assembly with a 1-1/2 inch concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 inches wide 1-1/4 inches tall and 2-3/8 inches long. It is rear... more | go to store |
| 2Pc Prime-Line Steel Sliding Door Roller 1 pk Sliding Glass Door Roller Assembly 1-1/4 Steel Ball Bearing Roller Unit Adjustable Steel Housing Housing Dimensions: Thickness 9/16 Length 2 & Height 1-3/16 Overall 13/16 . more | go to store |
| This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide, with a 7/8 in. flare, and is 1-9/16 in. tall. Features a rear adjusting threaded mounting hole on the back... more | go to store |
| This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has the unique housing that is 15/16 in. wide and 1-5/16 in. tall. It is rear adjusting with a 10-24 threaded mounting hole and mounting... more | go to store |
| This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... more | go to store |
| This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The housing is 3/4 in. wide with a 7/8 in. flare and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is... more | go to store |
| This is two piece roller assembly used on Ador Hilite patio doors. The outer housing is 5/8 in. wide, 31/32 in. tall with a 11/32 in. flare width and has two hook tabs on top. The inner housing holds a 1-1/2 in. steel ball bearing roller. Together,... more | go to store |
| Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This insert style sliding screen... more | go to store |
| This is a unique housing patio door roller assembly. It is 23/32 in. wide, 1-7/8 in. tall, and 2-1/8 in. long with a 1-1/4 in. diameter steel ball-bearing roller. To install, remove the screw from the back and insert the assembly into the bottom rail... more | go to store |
| This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide, 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting... more | go to store |
| This roller is constructed from steel. It comes affixed to an adjustable steel housing. Used by Air Control, Howmet, Krestmark, and a variety of other sliding glass door manufacturers. | Prime-Line Sliding Door Roller Assembly w/ 1-1/2 in. Steel Ball... more | go to store |
| These patio door lock pins are constructed of steel and come in a chrome plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on chain for easy storage when not in use, and a... more | go to store |
| This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... more | go to store |
| This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... more | go to store |
| This is a coppertone finish left-handed, 13-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on coppertone finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a... more | FREE shipping go to store |
| Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This sliding screen door handle and latch is used by Bay Mills doors, as well as a variety of other patio door manufacturers of Hat Section doors. It... more | go to store |
| This is an F-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more | go to store |
| This is an F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more | go to store |
| This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more | go to store |
| This is an F-tab tandem roller assembly with two 1-1/8 in. concave steel ball bearing rollers installed. When the corner screw passes through the F-tab, the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
| This is an F-tab tandem roller assembly with two 1-1/8 in. concave steel ball-bearing rollers installed. When the corner screw passes through the F-tab, the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
| This is a plain back tandem roller assembly used by a variety of patio door manufacturers of metal or vinyl framed patio doors. It has two in-line 1-1/4 in. concave Plastic ball bearing rollers set in a stamped steel housing with rear adjustment. The... more | go to store |
| This is a unique housing tandem roller assembly used by a variety of manufacturers of sliding patio doors. It has two 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a stamped steel housing with end adjustment . The square shaped... more | go to store |
| This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 27/32 in. flare, and is 1-9/16 in. tall. It features a rear adjusting screw with a 1/4-20... more | go to store |
| This is a combination of a 1-1/2 in. diameter Plastic concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole and a combination of 5 different axle choices. Depending on the application, you can choose to rivet the roller... more | go to store |
| This is a combination of a 1-1/2 in. diameter Plastic concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole and a combination of 5 different axle choices. Depending on the application, you can choose to rivet the roller... more | go to store |
| This is a combination of a 1-1/2 in. diameter Plastic concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole and a combination of 5 different axle choices. Depending on the application, you can choose to rivet the roller... more | go to store |
| This is a plain back diecast patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a #10-32 threaded hole on... more | go to store |
Ads related to 4 1 2 swivel staple