Home Hardware › Prime Line Products › Sliding › 4 1 2 swivel staple

Prime-Line D 1798 1-1/4 In. Nylon Ball Bearing Sliding Door Roller Set (2 Pack)

Prime-Line D 1798 1-1/4 In. Nylon Ball Bearing Sliding Door Roller Set (2 Pack) more

Prime-Line 1-1/2 in. Ball Bearing Steel Sliding Door Roller Assembly, for Pella (Single Pack) in Brown | 7.4 H x 3.75 W x 0.85 D in | Wayfair

This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... more

Prime-Line Sliding Door Loop Lock, 2-1/4 in, Steel, Nickel Plated, Right Hand (Single Pack) in Gray | 7.4 H x 3.75 W x 1.2 D in | Wayfair U 10536

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. | Prime-Line Sliding Door... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack) in Yellow | 5.4 H x 3.75 W x 1.2 D in | Wayfair D 1688

This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 9/16 in. wide with a 13/16 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting... more

Prime-Line Sliding Door Handle Set With Clamp - 1 Each

This deluxe patio door lock features a 9-3/4 in. hard wood pull. The outside handle is black diecast. The clamp latch has a clamp profile of 1/4 inch and a clamp projection of 1/2 inches in the locked position. more

1PACK Prime-Line 1-1/4 In. Sliding Door Roller Set (2 Count)

Combination of a steel concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into place or use a roll pin... more

Prime-Line D 1579-C 1/4 x 48 In. Stainless Steel Sliding Patio Door Repair Track (2 Pack)

Prime-Line D 1579-C 1/4 x 48 In. Stainless Steel Sliding Patio Door Repair Track (2 Pack) more

Prime-Line MP2082 Sliding Door Keeper Diecast Chrome Plated 1-3/4 inch Mounting Holes (single pack) 2 Piece

Prime-Line MP2082 Sliding Door Keeper Diecast Chrome Plated 1-3/4 inch Mounting Holes (single pack) 2 Piece more

1 PK Prime-Line 1-1/2 In. Sliding Door Roller Set (2 Count)

Combination of a steel concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into place or use a roll pin... more

1-1/4 in. Steel Ball Bearing Low Carriage Sliding Door Roller Assembly

This is a unique housing tandem roller assembly used by a variety of manufacturers of sliding patio doors. It has two 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a stamped steel housing with end adjustment . The square shaped... more

Prime-Line D 1808 Sliding Door Tandem Roller Assembly Steel Ball Bearings 1-1/4 In. - Quantity 6

This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other vinyl patio door manufacturers. The housing is 3/4 in. wide and 1... more

Prime-Line D 1808 1-1/4 In. Steel Ball Bearing Sliding Door Tandem Roller Assembly for Milgard (Single Pack)

Prime-Line D 1808 1-1/4 In. Steel Ball Bearing Sliding Door Tandem Roller Assembly for Milgard (Single Pack) This is a plain back tandem roller assembly with two 1-1/4 inch concave steel ball bearing rollers. The stamped steel housing is adjustable.... more

Prime-Line D 1532 1-1/4 In. Steel Ball Bearing Sliding Roller Assembly for Fleetwood - Quantity 6

1-1/4 in. Steel Ball Bearing Sliding Roller Assembly Fleetwood. This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide 1-3/16 in. tall and 1-1/2 in. long.... more

Prime-Line D 1594 Steel Ball Bearing Sliding Patio Door Roller Assembly 1-1/2 In. - Quantity 6

Back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more

1-1/2 in. Sliding Glass Door Roller Assembly Marshall

This is a K-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide... more

Prime-Line D 1600 Adjustable 1-1/2 In. Steel Sliding Patio Door Roller Assembly - Quantity 6

Adjustable 1-1/2-in Steel Sliding Patio Door Roller Assembly. This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide with a 7/8 in. flare and is 1-9/16 in. tall.... more

Prime-Line D 1822 1-1/2 In. Steel Ball Bearing Sliding Door Roller Assembly - Quantity 6

1-1/2 in. Steel Ball Bearing Sliding Door Roller Assembly. This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 27/32 in. flare and is 1-9/16 in.... more

Prime-Line D 1533 Sliding Door Roller Assembly Fits Fleetwood and Fullview Steel 1-1/2 In. - Quantity 6

1-1/2 in. Steel Sliding Door Roller Assembly Fleetwood and Fullview. This is a plain back diecast patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is 13/16 in. wide 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20... more

Prime-Line D1822 Concave Edge Sliding Door Roller Assembly 1-1/2 x 5/16 Each

Highlights: Material: Steel Type: Concave Edge Sliding Roller Diameter: 1-1/2 Overall Depth: 1-9/16 Roller Width: 5/16 Bearing Type: Ball Tab Style: Plain Back 1-1/4 steel ball bearing roller Adjustable steel housing Yellow zinc plated for corrosion... more

Prime-Line N 6563 Bypass Sliding Closet Door Bottom Guide 4-3/16 In. Plastic White 2-Pk. - Quantity 6

Bottom sliding closet door guide is constructed of plastic and comes white in color. Each bottom guide mounts with 2 fasteners and they are designed to accommodate 1-3/8 in. by-passing closet doors. This pack supplies 2 pairs of by-passing doors or one... more

Prime Line N 6562 3-Pc. Bypass Sliding Closet Door Guide 3/4 In. High Adjustable Nylon 2-Pk. - Quantity 6

2 Pack 3-piece adjustable floor guide. Made of white nylon the guides at each end can be adjusted inward to accommodate doors 3/4 in.to 1-3/8 in. thick. Used by a variety of closet door manufacturers. The guides extend 3/4 in. from the floor. For... more

Prime-Line 163236 Sliding Closet Door Bottom Guide White Plastic 2-1/8 Each

Adjustable spacing fits 3/4 to 1-3/8 thick doors. Plastic material allows for smooth quite door movement. 1-1/4 high legs helps clear carpet pile. 2-1/8 Sliding closet door bottom guide Plastic adjustable spacing fits 3/4 to 1-3/8 thick doors 1-1/4... more

Prime-Line B 552 Sliding Screen Door Roller Nylon Center Grooved 1 In. Diameter 2-Pk. - Quantity 6

2 Pack 1 In. Diameter Sliding Screen Door Nylon Center Grooved Roller. This 1 In. diameter nylon constructed wheel features a center grooved design. It has a 1/4 In. diameter hole that fits most any axle. This universal design is used by many door... more

Prime-Line G 3004 Sliding Window Roller Assembly 7/16 In. Flat Nylon Roller 4-Pk. - Quantity 6

4 Pack Sliding Window Roller Assembly 7/16 in. Flat Nylon Roller. Flat edge suitable for use with: sliding window 7/16 in roller diameter 1/8 in roller width 1-1/2 in overall length 1/4 in overall width plastic White. This flat edge sliding window... more

Prime-Line B 548 Sliding Screen Door Roller Bolt Nut and High-Density Polyethylene Bushing 2-Pk. - Quantity 6

2 Pack Steel ball bearing roller features a 1 In. center grooved wheel. Also features a 1/4 In. diameter axle hole. Used by many door manufacturers. more

Prime-Line N 6517 Bypass Sliding Closet Door Top-Hung Back Rollers and Brackets 2-Pk. - Quantity 6

2 Pack side mount top hung adjustable roller bracket with a 3/4 in. ball bearing convex nylon roller and 1/2 in. offset that fits onto the back wardrobe door panel. It fits 3/4 in. to 1-3/8 in. thick doors. more

PRIME-LINE Make-2-Fit PL 14630 Corner Mount Flat Window Spring That Holds Window Screens Into Sliding (25 Pack) Zinc

PRIME-LINE Make-2-Fit PL 14630 Corner Mount Flat Window Spring That Holds Window Screens Into Sliding (25 Pack) Zinc This is a 1/4 inch x 2-3/4 inch heated-treated steel slip-in tension springs hold window screens into sliding aluminum window screen... more

Prime-Line N 6840 Flat Closet Door Roller for Sliding Doors Nylon 7/8 In. 2-Pk. - Quantity 6

2 Pack Adjustable top hung side mounted bracket with a 3/8 in. offset and 7/8 in. flat nylon roller used on the back of a sliding door panel. It fits 3/4 in. to 1-3/8 in. thick doors. Used by Johnson Hardware. more

Sliding Wardrobe Door Roller Top Hung Assemblies Superior (2-pack)

This is an adjustable side mounted top hung closet door roller assembly with a 7/16 in. offset and a 15/16 in. convex nylon roller used on Superior brand closet doors. It fits 3/4 in. to 1-3/8 in. thick doors. Originally used by Superior Door. more

Prime-Line N 6830 Sliding Wardrobe Door Roller Top Hung Assemblies Fits Superior Doors 2-Pk. - Quantity 6

2 Pack adjustable side mounted top hung closet door roller assembly. Has a 7/16 offset and a 15/16 in. convex nylon roller used on Superior brand closet doors. It fits 3/4 in. to 1-3/8 in. thick doors. Originally used by Superior Door. more

Prime-Line N 6717 Offset Sliding Wardrobe Front Door Roller Assembly 5/16 In. 2-Pk. - Quantity 6

2 Pack side mounted top hung adjustable wardrobe door roller assembly with a single 7/8 in. grooved nylon wheel for the front door panel. The stamped steel bracket assembly is adjustable and has a 5/16 in. offset. It fits 3/4 in. to 1-3/8 in. thick... more

Sliding Door Keeper Diecast Chrome Plated 1-11/16 Mounting Holes

This is a face mount diecast keeper that is chrome plated. The vertical screw slots allows for easy adjustment. 1-11/16 in. on center mounting holes. 2-3/4 in. in length and 3/4 in. width. more

1 PK Prime-Line Sliding Door Handle Set With Clamp

This deluxe patio door lock features a 9-3/4 in. hard wood pull. The outside handle is black diecast. The clamp latch has a clamp profile of 1/4 inch and a clamp projection of 1/2 inches in the locked position. The handle has 4-15/16 inch mounting... more

1 PK Prime-Line Sliding Door Steel Roller Assembly

This patio door roller is constructed from steel. Back patio door roller assembly with a 1-1/2 inch concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 inches wide 1-1/4 inches tall and 2-3/8 inches long. It is rear... more

Prime Line 132354 Sliding Patio Door Roller Axle Repair Kit

Sliding Patio Door Roller Axle Repair KitSpecifications Dimension - 0.88 x 3.88 x 3.88 in. Item Weight - 0.12 lbs.Features Includes 2 Stepped Axles 2 Roll Pins 2 Standard 1/4 in. Rivets 2-1/4 in.- 20 Carriage Bolts 2-1/4 in.- 20 Hex Nuts 2 Binder Posts... more

Prime Line 13728 Sliding Glass Door Roller Assembly- - 3.5 x 3.5 x 0.32 in.

Sliding Glass Door Roller Assembly.Specifications 1-1/2 in. Steel Ball Bearing Roller. Adjustable Steel Housing Assembly. Housing Dimensions: Thickness 11/16 in. Length 2-7/16 in. Height 1-1/8 in. Overall 3/4 in. Hole On Top Of Housing Is 10-32 Machine... more

Prime Line B639 11960B Sliding Door Tension Roller Each

Key Features Heat-treated high-tension steel spring 2 rollers used by metal industries. Center grooved 1/4 inch wide steel ball bearing roller. 1-3/4 inch long high-tension heat-treated steel spring. Includes no.8 x 3/8 inch phillips sheet metal screw.... more

Prime Line N 6668 Sliding Wardrobe Back Door Roller Assemblies 7/8 Each

Highlights: Single wheel Side mounting adjustable steel bracket For 3/4 to 1-3/8 thick doors up to 50lbs Roller Diameter: 7/8 Roller Edge Type: Convex Roller Material: Nylon Offset: 1/2 Mount: Side Carded more