Home Hardware › Prime Line Products › Nylon › Sliding › 4 1 2 swivel staple

Prime-Line D 1798 Sliding Door Roller Set with 1-1/4 inch Nylon Ball Bearing (2-pack) Gold

Prime-Line D 1798 Sliding Door Roller Set with 1-1/4 inch Nylon Ball Bearing (2-pack) Gold more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly (Single Pack) | 6.4 H x 3.75 W x 1.2 D in | Wayfair D 1728

This is a K-tab patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T shaped receptacle in the bottom of the patio door. No screws are required for installation. The housing... more

Prime-Line International Sliding Glass Door Roller Assembly, 1-1/2 in. Nylon Ball (Single Pack) | 5.4 H x 3.75 W x 1.15 D in | Wayfair D 1789

This is a K-tab patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide... more

Prime-Line 1 in. Nylon Sliding Screen Door Roller in Gray/White | 6.4 H x 3.75 W x 1.2 D in | Wayfair B 691

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door roller... more

Prime Line N 6562 3-Pc. Bypass Sliding Closet Door Guide 3/4 In. High Adjustable Nylon 2-Pk. - Quantity 6

2 Pack 3-piece adjustable floor guide. Made of white nylon the guides at each end can be adjusted inward to accommodate doors 3/4 in.to 1-3/8 in. thick. Used by a variety of closet door manufacturers. The guides extend 3/4 in. from the floor. For... more

Prime-Line B 552 Sliding Screen Door Roller Nylon Center Grooved 1 In. Diameter 2-Pk. - Quantity 6

2 Pack 1 In. Diameter Sliding Screen Door Nylon Center Grooved Roller. This 1 In. diameter nylon constructed wheel features a center grooved design. It has a 1/4 In. diameter hole that fits most any axle. This universal design is used by many door... more

Prime-Line G 3004 Sliding Window Roller Assembly 7/16 In. Flat Nylon Roller 4-Pk. - Quantity 6

4 Pack Sliding Window Roller Assembly 7/16 in. Flat Nylon Roller. Flat edge suitable for use with: sliding window 7/16 in roller diameter 1/8 in roller width 1-1/2 in overall length 1/4 in overall width plastic White. This flat edge sliding window... more

Prime-Line N 6840 Flat Closet Door Roller for Sliding Doors Nylon 7/8 In. 2-Pk. - Quantity 6

2 Pack Adjustable top hung side mounted bracket with a 3/8 in. offset and 7/8 in. flat nylon roller used on the back of a sliding door panel. It fits 3/4 in. to 1-3/8 in. thick doors. Used by Johnson Hardware. more

Prime-Line 1 in. Nylon Spring-Loaded Rollers for Sliding Screen Doors, for Columbia in Gray | 5.4 H x 3.8 W x 1.2 D in | Wayfair B 617

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door roller... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Tandem Roller Assembly (Single Pack) in Gray | 7.4 H x 3.8 W x 1.05 D in | Wayfair D 1920

This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other manufacturers, primarily on vinyl patio doors. The housing is... more

Prime-Line 1-1/2 in. Steel, Sliding Door Roller Assembly w/ Nylon Ball Bearing (Single Pack) in Gray/White | 5.3 H x 3.75 W x 1.15 D in | Wayfair

This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... more

Prime-Line 1/2 in. Nylon Flat-Edge Sliding Window Roller Assembly, Hilite in White | 5.4 H x 3.75 W x 0.65 D in | Wayfair G 3003

This is a sliding window roller. White plastic housing, with a flat edge plastic roller. Top rollers adjust up to provide anti-lift protection. Bottom rollers adjust up and down for alignment. Used on Hilite 200 series windows. | Prime-Line 1/2 in.... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly, for Lupton (Single Pack) in Yellow | 5.4 H x 3.75 W x 0.9 D in | Wayfair

This is a F-tab patio door roller assembly with a 1-1/4 in. concave nylon ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Dual Roller Assembly, for Ador & Hilite (Single Pack) in Green/Yellow | Wayfair D 1547

This is a unique one of a kind trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Door Nylon Roller Assembly, for North (Single Pack) in Yellow | 9.3 H x 3.75 W x 0.45 D in | Wayfair

This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly (Single Pack) | 5.44 H x 3.82 W x 0.88 D in | Wayfair D 1815

This is a F-tab patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more

Prime-Line 7/8 in. Nylon, Flat Closet Door Roller, for Sliding Doors in White/Yellow | 2.5 H x 1.75 W x 0.6 D in | Wayfair N 6840

This is an adjustable top hung, side mounted bracket with a 1/16 inch offset and 7/8 inch flat nylon roller used on the back of a sliding door panel. It fits 3/4 inch to 1-3/8 inch thick doors. Used by a variety of sliding closet or wardrobe doors. |... more