See Matches In
Narrow Search Results
Price Range
Brand
- Baldwin
- Brady
- Deltana
- Grandeur
- HAGER
- Montague Metal Products
- Prime Line Products Remove
- SignMission
Stores
Best Seller | These vintage style door knob rosettes are constructed of stamped steel and come in a classic bronze finish. This type of rosette is designed for indoor use only, and it is used with other vintage style hardware by Prime-Line Products and other classic... more | go to store |
Prime-Line Back Plate, 3-1/2 in. in Brown | 5.35 H x 3.75 W x 0.3 D in | Wayfair U 10323 This is a 3-1/2 inch diameter door cover plate. It will cover marred doors and allows conversion from 2-3/8 inch to 2-3/4 inch backset, or 2-3/4 inch to 2-3/8 inch. Designed for use to help the structural integrity of handles or locks on a door, or if... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/2 in. tall with a flare width of 13/16 in. and features a rear adjusting with a 1/4-20... more | go to store |
This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... more | go to store |
This is a U-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller in a stamped steel "U" back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw or... more | go to store |
This latch guard is constructed from steel and comes finished in gray. It is designed to protect your door from forced entry. Used on inswinging doors. | Prime-Line Steel Latch Guard Plate Cover for In-Swinging Doors (1 Set) in Gray | 10.35 H x 3.75 W... more | go to store |
This cylinder housing and 5-pin tumblers of this lock are constructed of brass, it comes finished with a chrome face and features a hardened cut-away tailpiece. This cylinder lock is used to key lock most surface-mounted patio door handle sets and... more | go to store |
This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow... more | go to store |
Has the roller on your screen door damaged or missing? This roller is used by Air Control sliding screen doors as well as glass patio doors using a narrow grooved roller. It is used in various applications by many patio door manufacturers. It is a high... more | go to store |
This step drill by make-2-fit is constructed of hardened steel and features two diameters in one, for specifically for use when installing aluminum screen plunger bolts. It is used to drill 2 different diameter holes in one single pass for installation... more | go to store |
This is an unique back diecast patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used on Crossly doors. It's unique diecast housing is 11/16 in. stepping down to 9/16 in. wide, 1-1/8 in. tall and 2-5/16 in. long with a flare... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This high-tension steel spring... more | go to store |
These standard latch strikes are constructed of steel and come in a matte black finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners, included with... more | go to store |
These hook and eye latches are constructed of steel and come in a zinc-plated finish. They feature a 2-1/2 in. reach and are commonly used to secure wooden screen doors. These latches are easy to install and are used on various applications. |... more | go to store |
Prime-Line Push Plate (Single Pack), Steel | 15 H x 3.5 W x 0.0625 D in | Wayfair J 4923 These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... more | go to store |
This deadbolt strike by Prime-Line Products is constructed of heavy gauge steel and it comes in an antique brass-plated finish. This heavy duty deadbolt strike replaces most deadbolt strikes and increases security with the 3-inch screws included within... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
This patio sliding Door mortise lock by Prime-Line Products is constructed with a corrosion-resistant, stainless steel housing and stainless steel faceplate. It features a square-end face plate that serves as an adjustment feature for the hook's... more | go to store |
Prime-Line Chrome Metal Spring Window Lock in Gray | 9.35 H x 3.75 W x 0.45 D in | Wayfair F 2538 This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum... more | go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This sliding screen door handle and latch is non-handed and used as a replacement handle set for 1/2 inch extruded and roll-formed sliding screen doors.... more | go to store |
This kit includes two drawer track guides constructed of white plastic, and they are used to replace damaged or missing drawer guides that have a 25/32 in. wide x 5/16 in. tall opening. These guides are designed to fit 3/4 in. x 9/32 in. tracks to... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door corner... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This rocker style spring tension... more | go to store |
These vintage style door knob rosettes are constructed of stamped steel and come in a classic bronze finish. This type of rosette is designed for indoor use only, and it is used with other vintage style hardware by Prime-Line Products and other classic... more | go to store |
This non-tilt block and tackle channel balance are constructed of a mill-finished steel U-frame housing. The internal working components include a spring, cord, and pulley system, but the plastic top and bottom guide shoes must be selected separately... more | go to store |
This bright brass latch guard set is constructed of solid steel. Designed for use with inswing hinged entry door systems. Features a 2-piece shielding design that interlocks to help protect the door from forced entry. The wider jamb bracket mounts to... more | go to store |
This is an F-tab patio door roller assembly with a 1-1/4 in. concave ball bearing roller that replaces the Old Style design. Used on Sun Valley, Fullview, Glasco and a variety of other sliding patio door manufacturers. When the corner screw passes... more | go to store |
This is a sliding patio door keeper. It is made of heavy gauge stamped steel that is zinc plated, with 3/4 in. mounting holes on center. The vertical slots to allow easy adjustment. Also features a 3/8 in. hook offset. | Prime-Line Stamped Steel,... more | go to store |
These 5/16 in. screen frame corners are constructed of stamped aluminum and come in a milled finish. The dimensions of these corner pieces are designed to fit into the miter cut corners (at 45 degree angles) of 3/4 in. x 5/16 in. aluminum screen frames... more | go to store |
This is a 1/8 inch window screen clip used to secure window screens or storm windows and panels for storm doors. Diecast construction helps resists corrosion. Comes with Included fasteners for a complete installation. Finish: Tan, Size: 0.75" H x 4" W... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This roller assembly with M-shaped... more | go to store |
These strike plates are constructed of stamped steel and come in a brass-plated finish. They feature an adjustable depth to allow for snug-fit adjustments of door to jamb latching. Using strikes like these help eliminate rattling of doors when loose... more | go to store |
This sliding window pin lock is constructed of steel and comes in a chrome-plated finish. The shortest lock pin manufactured by Prime-Line Products, it is designed to fit on older style, metal framed windows; usually of single pane glass with very thin... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/2 in. tall with a flare width of 13/16 in. It is a rear adjusting with a 1/4-20 threaded... more | go to store |
This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow... more | go to store |
Prime-Line Back Plate, 3-1/2 in. in Gray | 5.35 H x 3.75 W x 0.3 D in | Wayfair U 10322 This is a 3-1/2 inch diameter door cover plate. It will cover marred doors and allows conversion from 2-3/8 inch to 2-3/4 inch backset, or 2-3/4 inch to 2-3/8 inch. Designed for use to help the structural integrity of handles or locks on a door, or if... more | go to store |
This Bi-Fold Door top or bottom pivot bracket by Prime-Line Products is constructed from stamped steel and it comes in a corrosion-resistant, zinc-plated finish. The bracket easily mounts into the top or bottom bi-fold door track, and it used by many... more | go to store |
This tilt key is constructed from white nylon. It is 0.160 in. x 0.185 in. and is easy to install. This type of tilt key is used on triple track systems and storm window panels. | Prime-Line 0.160 In. x 0.185 In. Nylon Tilt Key in White | 1.25 H x 4.94... more | go to store |
Ads related to white 24 x 0 35