Appliance Accessories › Vacuum Accessories › Windsor › Brush › vacuum bag

Windsor Model #53755 and #53198 Ametek vacuum motor, 24 volt

This is an Ametek Vacuum Motor for your Windsor Model #53755 and Windsor Model #53198, 24 volt. DON'T RISK PREMATURE FAILURE FOR YOUR NEW MOTOR! We HIGHLY recommend the maximum protection of your motor by using our exclusive Filtered Motor Gasket, part... more

Windsor #8.600-540.0, #8.625-851.0 Ametek vacuum motor, 24 volt.

This is an Ametek Vacuum Motor for your Windsor #8.600-540.0 and #8.625-851.0, 24 volt. This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. The factory motor does not have this sealed... more

Windsor Model #86005460 & WIN8.600-546.0 Ametek Vacuum Motor, 24 volt

This is a New Windsor Model #86005460 & WIN8.600-546.0 Ametek Vacuum Motor, 24 volt.This motor has a 1 1/2 inch tube on the base of the motor.We HIGHLY recommend the maximum protection of your motor by using our exclusive Filtered Motor Gasket, part... more

Windsor #8.602-882.0, #8.625-857.0 Ametek vacuum motor, 120 volt.

This is an Ametek Vacuum Motor for your Windsor #8.602-882.0 and #8.625-857.0, 120 volt. It is suggested you replace the motor gasket part MTR512. Uses motor brushes part MTR514. more

Windsor #8.625-848.0 Ametek vacuum motor, 36 volt.

This is an Ametek Vacuum Motor for your Windsor #8.625-848.0, 36 volt. This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. The factory motor does not have this sealed bearing. It is... more

Windsor Model #53130 Ametek vacuum motor, 120 volt.

This is an Ametek Vacuum Motor for your Windsor Model #53130, 120 volt. This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. The factory motor does not have the sealed bearings. It is... more

Windsor Model #53614 Ametek vacuum motor, 120 volt.

This is an Ametek Vacuum Motor for your Windsor Model #53614, 120 volt. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all... more

Windsor Compact 17 and Compact 20 Ametek Vacuum Motor #53735, 120 volt

This is a factory replacement motor for your Windsor Compact 17 and Compact 20, 24 volt. DON'T RISK PREMATURE FAILURE FOR YOUR NEW MOTOR! We HIGHLY recommend the maximum protection of your motor by using our exclusive Filtered Motor Gasket, part... more

Ametek Extra Value Windsor #8.625-848.0 Vacuum Motor, 36 volt

PLEASE NOTE, THIS MOTOR DOES NOT HAVE REPLACEABLE CARBON BRUSHES. THUS WHEN THE BRUSHES WEAR OUT, MOTOR MUST BE SCRAPPED AND REPLACED. This motor is an inexpensive version of the branded motor listed above and carries all of the same specs, mounting... more

Windsor Model #53772 Ametek vacuum motor, 24 volt.

This is an Ametek Vacuum Motor for your Windsor Model #53772, 24 volt. This motor has a sealed bearing system which is sealed against dirt and dust from entering the bearings thus giving a longer motor service. The original factory motor does not have... more

Windsor Model #862584300 Ametek Vacuum Motor, 120 volt

This is a New Windsor Model #862584300 Ametek Vacuum Motor, 120 volt.This motor has a 1 1/2 inch tube on the base of the motor.We HIGHLY recommend the maximum protection of your motor by using our exclusive Filtered Motor Gasket, part #MTR1500. Our... more

Windsor Escort vacuum motor, 120 volt.

This is a factory replacement motor for your Windsor Escort This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. It is suggested you replace the motor gasket part MTR512. Protect your... more

Windsor Model #53177 Ametek vacuum motor, 36 volt.

This is an Ametek Vacuum Motor for your Windsor Model #53177, 36 volt. This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. The factory motor does not have this sealed bearing. It is... more

Ametek Extra Value Windsor Model #53177 Vacuum Motor, 36 volt

PLEASE NOTE, THIS MOTOR DOES NOT HAVE REPLACEABLE CARBON BRUSHES. THUS WHEN THE BRUSHES WEAR OUT, MOTOR MUST BE SCRAPPED AND REPLACED. This motor is an inexpensive version of the branded motor listed above and carries all of the same specs, mounting... more

Ametek Extra Value Windsor Model #53772 Vacuum Motor, 24 volt

PLEASE NOTE, THIS MOTOR DOES NOT HAVE REPLACEABLE CARBON BRUSHES. THUS WHEN THE BRUSHES WEAR OUT, MOTOR MUST BE SCRAPPED AND REPLACED. This motor is an inexpensive version of the branded motor listed above and carries all of the same specs, mounting... more

Windsor Versamatic Upright Vacuum 14" Brush Strip ONLY #2046

This is the Genuine Windsor Versamatic Upright Vacuum 14" Brush Strip ONLY #2046. This is one brush roll strip ONLY! Fits ALL 14” Versamatic AND Versamatic Plus Upright Vacuum models. Will also fit Sebo 370 commercial upright vacuums. Use ONLY genuine... more

Windsor Model #53142 and #53704 Ametek vacuum motor, 120 volt

This is an Ametek Vacuum Motor for your Windsor Model #53142 and #53704, 120 volt. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a... more

Windsor Versamatic Upright Vacuum 18" Brush Strips ONLY #4028

This is the Genuine Windsor Versamatic Upright Vacuum Brush Strips #4028. Fits ALL 18Windsor Versamatic Upright Vacuum Brushrolls. Use ONLY genuine Windsor parts to get maximum performance and maintain your vacuums warranty! more

Ametek Vacuum motor for Windsor Admiral 8, Cadet 7, Clipper 12 Carpet Extractor and Windsor 8.602-688.0, 120 volt

This is a factory replacement motor for the following Windsor carpet extractors: Windsor Admiral 8 Windsor Cadet 7 Windsor Clipper 12 Carpet Extractor Windsor 8.602-688.0 This motor has sealed bearings in it so dust and dirt will not get into the... more

Windsor Model #53789 and #86026880 Ametek Vacuum Motor, 120 volt

This is a factory replacement motor for your Windsor #53789 and #86026880, 120 volt. DON'T RISK PREMATURE FAILURE FOR YOUR NEW MOTOR! We HIGHLY recommend the maximum protection of your motor by using our exclusive Filtered Motor Gasket, part MTR1500.... more

Windsor #8.600-545.0, #8.600-523.0 Ametek vacuum motor, 36 volt

This is an Ametek Vacuum Motor for your Windsor #8.600-545.0, #8.600-523.0, 36 volt. This motor has a 1 1/2 inch flange on the base of the motor. DON'T RISK PREMATURE FAILURE FOR YOUR NEW MOTOR! We HIGHLY recommend the maximum protection of your motor... more

Windsor Model #53707, #53134 and #86026770 Ametek vacuum motor, 120 volt

This is an Ametek Vacuum Motor for your Windsor Model #53707, #53134 and #86026770, 120 volt This motor has a 1 1/2 inch tube on the base of the motor. It is suggested you replace the motor gasket part MTR512. Uses motor brush part MTR515. more

Windsor Sensor SR12 Upright Vacuum Brushroll #5010WI

This is the Brushroll #5010WI for the Genuine Windsor Sensor SR12. Fits Windsor Sensor SR12 Upright Vacuum models ONLY. This Windsor Sensor Brushroll features a Dual Brush design. Also, fits SEBO Upright models X1, XP1, X4, G1, DART1, and FELIX1. more

Windsor #8.602-676.0 Ametek vacuum motor, 120 volt

This is an Ametek Vacuum Motor for your Windsor #8.602-676.0, 120 volt. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all... more

Windsor #8.602-677.0, #8.625-843.0 Ametek vacuum motor, 120 volt

This is an Ametek Vacuum Motor for your Windsor #8.602-677.0, #8.625-843.0, 120 volt. This motor has a 1 1/2 inch tube on the base of the motor. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a... more

Windsor #Admiral, Commodore vacuum motor, 120 volt.

This is a factory replacement motor for your Windsor #Admiral, Commodore This motor has a 1 1/2 inch tube on the base of the motor. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor... more

Windsor Dominator 2 Extractor vacuum motor, 120 volt.

This is a factory replacement motor for your Windsor Dominator 2 Extractor. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for... more

Windsor Model #53800 and #53774 Ametek vacuum motor, 120 volt.

This is an Ametek Vacuum Motor for your Windsor model #53800 and #53774, 120 volt. It is suggested you replace the motor gasket part MTR512. Uses motor brushes part MTR514. more

Windsor Model #53021 Ametek vacuum motor, 120 volt

This is an Ametek Vacuum Motor for your Windsor Model #53021, 120 volt. It is suggested you replace the motor gasket Part MTR511. Uses motor brushes part MTR505. more

Windsor Sensor Upright Vacuum Brush Belt #5110

This is the Windsor Sensor Upright Vacuum Brush Belt #5110. Fits Windsor Sensor Upright Vacuum models SR12, SR15, SR18, 86005000, and 8.600.500.0. more

Windsor Versamatic and Versamatic Plus 14 inch Brush Strip #8.600.244-0

This is the Genuine Windsor Versamatic and Versamatic Plus 14 inch Brush Strip. Genuine part #86002440. Specifications: 14 inch brush strip Machine Application: Fits all Versamatic and Versamatic Plus and Sebo 370 commercial upright vacuums. Also fits... more