Micro 100 › shop vac 1 1 4

Micro 100 Cor Rad End Mill 1/4 Carb 0.0200 rad GEC-250-4-020X

Corner Radius End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.02 in 3/4 in 2 1/2 in more

MICRO 100 SFL-250-43 Router Single Flute Plastic

Solid Router Bit, Primary Material Application Composite, Spiral Downcut, Fractional Inch, 1/4 in Cutter Dia. more

Micro 100 Sq. End Mill Single End Carb 1/4 GEM-250-4

Square End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Cor Rad End Mill 1/4 Carb 0.0100 rad GEC-250-4-010

Corner Radius End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 3/4 in 2 1/2 in more

Micro 100 Single-Point Tool Bit 1/4 Carbide D-4

Single-Point Tool Bit D Carbide Zinc Shank Width 1/4 in more

Micro 100 CR End Mill 0.090 CR 1 Dia 1-1/2 Cut GEC-001-2-090

Corner Radius End Mill 1 in Milling Dia. Bright (Uncoated) Fractional Inch 0.060 in 1 1/2 in 4 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-4-020

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Threading Tool 1/4 Carbide QIT-2001000X

Threading Tool Included Angle 60 Degrees Carbide AlTiN 0.0750 in Coolant Through Threading more

Micro 100 Solid Router Bit 1/4 Spiral Downcut SFL-250-410

Solid Router Bit Primary Material Application Composite Spiral Downcut Fractional Inch 1/4 in Cutter Dia. more

Micro 100 Ball End Mill Single End 1/2 Carbide SBM-500-4

Ball End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Non-Coolant Through more

Micro 100 Solid Router Bit 1/4 Diamond Cut RDD-60

Solid Router Bit Primary Material Application Composite Drill Point Fractional Inch 1/4 in Cutter Dia. more

Micro 100 Solid Router Bit 1/4 Diamond Cut RDB-60

Solid Router Bit Primary Material Application Composite Burr End Fractional Inch 1/4 in Cutter Dia. more

Micro 100 Solid Router Bit 1/4 Diamond Cut RDC-70

Solid Router Bit Primary Material Application Composite End Mill Fractional Inch 1/4 in Cutter Dia. more

Micro 100 Ball End Mill Single End 1/4 Carbide BEM-250-03X

Ball End Mill 1/4 in Milling Dia. Carbide AlTiN Non-Coolant Through more

Micro 100 Threading Tool 1/4 Carbide IT-200750

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.0750 in Threading more

Micro 100 Ball End Mill Single End 1/4 Carbide BEM-250-04

Ball End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Non-Coolant Through more

Micro 100 Sq. End Mill Single End Carb 1/4 GEM-250-3

Square End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Corner Rounding End Mill 1/4 Cobalt CREM-060-080

Single End Corner Rounding End Mill 1.50 mm Number of Flutes 3 Carbide Bright (Uncoated) Straight more

Micro 100 Sq. End Mill Single End Carb 1/4 SDH-250-03X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Cor Rad End Mill 1/4 Carb 0.0200 rad GEC-250-3-030

Corner Radius End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.03 in 3/4 in 2 1/2 in more

Micro 100 Thread Mill 1/4 -20 Carbide TM-250-20X

Helical Thread Mill UN Carbide AlTiN 0.1800 in more

Micro 100 Threading Tool 1/4 Carbide IT-200400

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.0750 in Threading more

Micro 100 Sq. End Mill Single End Carb 1/2 GEM-500-4

Square End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1 in Overall Length 3 in Shank Dia. 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1.00mm GEMM-010-4

Square End Mill 1.00 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3.00 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad GEC-125-4-010

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 1/2 in 1 1/2 in more

Micro 100 Threading Tool 1/4 Carbide IAT-750-16

Threading Tool Included Angle 29 Degrees Carbide Bright (Uncoated) 0.0750 in Threading more

Micro 100 Cor Rad End Mill 1/4 Carb 0.0200 rad VHSM-080-5K

Corner Radius End Mill 8.00 mm Milling Dia. Carbide nACRo Straight Metric 0.50mm 16.00 mm 63.00 mm more

Micro 100 Sq. End Mill Single End Carb 1/4 EMS-250-4X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Engraving Blank Carbide 1/4 RS-250-24

Engraving Blank Carbide Double End 1/4 in Bright (Uncoated) Fractional Inch 0.2500 more

Micro 100 Thread Mill 1/4 -28 Carbide TM-250-28

Helical Thread Mill UN Carbide Bright (Uncoated) 0.1800 in more

Micro 100 Threading Tool 1/4 Carbide IT-180750

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.0550 in Threading more

Micro 100 Threading Tool 1/4 Carbide QIT-180350

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.0555 in Coolant Through Threading more

Micro 100 Threading Tool 1/4 Carbide QIT-180750

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.0555 in Coolant Through Threading more

Micro 100 Sq. End Mill Single End Carb 1/4 SEM-250-02

Square End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/2 in Overall Length 2 in Shank Dia. 1/4 in more

Micro 100 Single-Point Tool Bit 1/4 Carbide RT-500

Single-Point Tool Bit RT Carbide Zinc Right Hand Shank Width 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1/16 GEM-062-4

Square End Mill 1/16 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Single-Point Tool Bit 1/4 Carbide BL-6

Single-Point Tool Bit BL Carbide Zinc Left Hand Shank Width 3/8 in more

Micro 100 Threading Tool 1/4 Carbide QIT-180750X

Threading Tool Included Angle 60 Degrees Carbide AlTiN 0.0555 in Coolant Through Threading more