You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | This molded plastic screen door grille allows for maximum screen coverage on standard 30 in. to 36 in. sliding screen doors. Proper installation of the grille adds strength to the entire door and helps prevent screen fabric damage. The molded plastic... ... more | go to store |
 | These pintle assemblies are constructed of steel and plastic components, and the plastic is white in color. This pintle is affixed to a steel bolt, and includes an external tooth lock washer, an internal tooth lock washer and a nylon insert locknut... ... more | go to store |
| Best Seller  | These pivot hinge pins are constructed of steel and come in a zinc-plated finish. They feature a male 5/16"-18 threaded end on one side and a slotted end on the other. This pivot hinge pin has a 3/8 inch outside diameter and measures 3-1/4 inches in... ... more | go to store |
 | These quarter-size wall stops are constructed of cast brass and come in a brushed chrome finish. They feature a gray convex rubber bumper that projects a full 9/16 in. to help prevent damage to adjacent walls and locking hardware. This wall stops also... ... more | go to store |
 | This is a diecast unique back patio door roller assembly with a 1-1/4 in. concave steel ball-bearing roller used by a variety of patio door manufacturers. Its diecast housing is a cross between the Unique or the Plain Back styles. It is 11/16 in. wide... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 7/8 in. flare, and 1-9/16 in. tall. It is rear adjusting with a 1/4-20 threaded... ... more | go to store |
 | This is a C-tab patio door roller assembly with a 1-1/8 in. diameter concave, or grooved, steel ball bearing roller. As the C-shaped tab fits around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
 | This is a stainless steel unique housing tandem roller assembly, often found on Andersen sliding patio doors as well as a variety of other manufacturers of wood patio doors. It has two 1-1/4 in. concave stainless steel ball bearing rollers set in a... ... more | FREE shipping go to store |
 | This is the replacement inner housing that fits into the Prime-Line part D 1545 outer housing. It has a 1-1/2 in. steel ball bearing roller installed in the stamped steel inner housing. If needed, the adjusting screw can be backed out of the old roller... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
 | This is a C-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The housing is 9/16 in. wide and 1-3/8 in.... ... more | go to store |
 | These pintle assemblies are constructed of steel and plastic components, and the plastic is black in color. This pintle is affixed to a steel bolt, and it includes nylon insert jam locknut. Pintle assemblies like these are used together with other... ... more | go to store |
 | These pintle assemblies are constructed of steel and plastic components, and the plastic is black in color. This pintle is affixed to a steel bolt, and it includes nylon insert jam locknut. Pintle assemblies like these are used together with other... ... more | go to store |
 | These pintle assemblies are constructed of steel and plastic components, and the plastic is white in color. This pintle is affixed to a steel bolt, and includes an external tooth lock washer, an internal tooth lock washer and a nylon insert locknut... ... more | go to store |
 | This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows... ... more | go to store |
 | This non-tilt block and tackle channel balance are constructed of a mill-finished steel U-frame housing. The internal working components include a spring, cord, and pulley system, but the plastic top and bottom guide shoes must be selected separately... ... more | go to store |
 | These sliding screen Door latch and pull handles from Prime-Line Products are constructed of durable plastic and stamped steel components. The surface-mountable handles are constructed of plastic and come black in color, and the swivel latch is... ... more | go to store |
 | This non-tilt block and tackle channel balance are constructed of a mill-finished steel U-frame housing. The internal working components include a spring, cord, and pulley system, but the plastic top and bottom guide shoes must be selected separately... ... more | go to store |
 | This non-tilt block and tackle channel balance are constructed of a mill-finished steel U-frame housing. The internal working components include a spring, cord, and pulley system, but the plastic top and bottom guide shoes must be selected separately... ... more | go to store |
 | This non-tilt block and tackle channel balance are constructed of a mill-finished steel U-frame housing. The internal working components include a spring, cord, and pulley system, but the plastic top and bottom guide shoes must be selected separately... ... more | go to store |
 | This non-tilt block and tackle channel balance are constructed of a mill-finished steel U-frame housing. The internal working components include a spring, cord, and pulley system, but the plastic top and bottom guide shoes must be selected separately... ... more | go to store |
 | This non-tilt block and tackle channel balance are constructed of a mill-finished steel U-frame housing. The internal working components include a spring, cord, and pulley system, but the plastic top and bottom guide shoes must be selected separately... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
 | This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... ... more | go to store |
 | This is a E-tab patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 23/32 in.... ... more | go to store |
 | This non-tilt block and tackle channel balance are constructed of a mill-finished steel U-frame housing. The internal working components include a spring, cord, and pulley system, but the plastic top and bottom guide shoes must be selected separately... ... more | go to store |
 | This non-tilt block and tackle channel balance are constructed of a mill-finished steel U-frame housing. The internal working components include a spring, cord, and pulley system, but the plastic top and bottom guide shoes must be selected separately... ... more | go to store |
 | This is a tub and shower door nylon ball bearing roller with a flat edged wheel. It has a threaded hex head hub that uses anin. long Philips binder head machine screw to fasten it to the door bracket. Used on a variety of different tub and shower top... ... more | go to store |
 | Prime-line part F 2919 is a vinyl window sweep latch for use on single-hung and double-hung vertical sliding windows. This item includes a latch, fasteners, and easy-to-follow installation instructions. These bronze-colored latches are constructed of... ... more | go to store |
 | This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
 | Prime-line part F 2919 is a vinyl window sweep latch for use on single-hung and double-hung vertical sliding windows. This item includes a latch, fasteners, and easy-to-follow installation instructions. These bronze-colored latches are constructed of... ... more | go to store |
 | Prime-line part F 2919 is a vinyl window sweep latch for use on single-hung and double-hung vertical sliding windows. This item includes a latch, fasteners, and easy-to-follow installation instructions. These bronze-colored latches are constructed of... ... more | go to store |
 | This security as an adjustable door strike by prime-line products is constructed of steel and comes in a brass-plated finish. It is ideal for use on wood or metal door jambs. Constructed of solid steel, the strike plate features a classic bronze finish... ... more | go to store |
 | This security as an adjustable door strike by prime-line products is constructed of steel and comes in a brass-plated finish. It is ideal for use on wood or metal door jambs. Constructed of solid steel, the strike plate features a classic bronze finish... ... more | go to store |
 | These U-shaped wall brackets are constructed of 18 ga. continuous roll formed stainless steel material and come with a 5-hole installation pattern. They feature an inside width of 1/2 in. designed for installations of 1/2 in. thick panels, and they... ... more | FREE shipping go to store |
 | This is a C-tab tandem roller assembly with 1-1/8 in. steel ball bearing rollers installed. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 9/16... ... more | go to store |
 | This is an inside pull designed for Andersen doors. Mounting holes are 2-1/8 in. on center. Allows the owner to slide screen doors open and closed with ease. | Prime-Line Sliding Screen Door Inside Pull, Stone, Andersen (Single Pack) in Gray | 3.13 H x... ... more | go to store |
 | Red bushing spiral balance, for sash, weights up to 25 pounds. Used to counter-weight the moving sash on single and double-hung windows. Fits window styles that tilt in for cleaning. This spiral balance does not include an end clip and must be ordered... ... more | go to store |
 | This is a stainless steel mortise lock designed for a 45 degree keyway. The hook is spring-loaded with an adjustable hook projection that extends to the locked position to automatically latch upon closing, and the adjustment screw is on the face of the... ... more | go to store |
Ads related to Prime-Line Pintle Assembly, 5/8 in. Outside Diameter Single Pack in Black | 0.63 H x 4 W x 4 D in | Wayfair 658-7106
