Prime-Line GD 52107 Standard Garage Door Hinge with Fasteners #4 Position 3 In. Wide - Quantity 6

PRIMELINE TOOLS GD 52106 Heavy Duty Standard Garage Hinge 3 in. width Door

This heavy-duty hinge is constructed from heavy-duty 14 gauge steel. The roller tube accepts a standard 7/16 inch diameter stem roller. This style hinge is used by most garage door manufacturers. •Used by most garage door manufacturers •Accepts a 7/16... ... more

Prime-Line Sectional Garage Door Extension Spring, Steel in Black | 3.4 H x 4.1 W x 34.6 D in | Wayfair GD 12320

This Prime-Line GD 12320 Garage Door Torsion Spring includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion garage springs replacement provide lifting force for heavy garage doors and must be... ... more

Prime-Line Heavy Duty Standard Garage Hinge Pocket Door Hardware, Steel in Gray | Wayfair GD 52212

This is a heavy-duty 14 ga. galvanized steel hinge. The roller tube accepts a standard 7/16 in. diameter stem roller. Used by most garage door manufacturers. #2 position and center. | Prime-Line Heavy Duty Standard Garage Hinge Pocket Door Hardware,... ... more

Prime-Line 3/32 In. Aluminum Poket Door Hardware in Gray | Wayfair GD 52107

These are extruded aluminum ferrules are used to clamp cable loops into fixed position. The stops finish off end of cable or as a stopping point at any location on cable. Select from eight stock cable sizes. | Prime-Line 3/32 In. Aluminum Poket Door... ... more

Black Wrought Iron Garage Door Hardware Poseidon Trident Design 12" Rust Resistant with Hardware Pack of 4 Renovators Supply

Black Wrought Iron Decorative Dummy Hinge Straps for Garages Gates, Barns Doors and More. Poseidon Trident Antique Design. 12 Length 3.4 Wide. Hardware Included. Add design flare to Doors, Walls, Gates with these decorative dummy hinge straps. Set of 4. ... more

Blum Clip Top 120+ Degree Straight Arm Hinge, Self-Closing, Large Full Overlay Screw on

Hinge Opening Angle: +120° Hinge Type: CLIP top Use Type: Standard Door Cabinet Type: Frameless Door Position: Full Overlay Door Thickness: Min. 5/8 in* Cabinet Thickness 3/4 to 13/16 in* Closing Mechanism Self-Closing This product may expose its users… ... more

PRIMELINE TOOLS GD 52104 Standard Hinge, #1 Position, with Fasteners, 3 in.

This is a heavy-duty 14 gauge galvanized steel hinge. The roller tube accepts a standard 7/16 inch diameter stem roller. Used by most garage door manufacturers. #1 position and center. •Used by most garage door manufacturers •14 gauge galvanized steel... ... more

Prime-Line Garage Door Hinge, Steel in Black | Wayfair GD 12277

This is a heavy-duty 14 gauge galvanized steel hinge. The roller tube accepts a standard 7/16 in. diameter stem roller. Used by most garage door manufacturers, installs on the door at position #4. | Prime-Line Garage Door Hinge, Steel in Black | Wayfair ... more

Prime-Line Garage Door Torsion Spring, Steel | 33.75 H x 4 W x 3.38 D in | Wayfair GD 12235

This Prime-Line GD 12235 Garage Door Torsion Spring includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion garage springs replacement provide lifting force for heavy garage doors and must be... ... more

Prime-Line Sectional Garage Door Extension Spring, Steel in Black | 34.5 H x 4.07 W x 3.25 D in | Wayfair GD 12321

This Prime-Line GD 12221 Garage Door Torsion Spring includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion garage springs replacement provide lifting force for heavy garage doors and must be... ... more

Prime-Line Standard Hinge Pocket Door Hardware, Steel in Gray | Wayfair GD 52119

This is a heavy-duty 14 ga. galvanized steel hinge. The roller tube accepts a standard 7/16 in. diameter stem roller. Used by most garage door manufacturers. #1 position and center. | Prime-Line Standard Hinge Pocket Door Hardware, Steel in Gray | Wayfair ... more

Prime-Line Heavy Duty Standard Garage Top Roller Fixture Pocket Door Hardware in Gray | Wayfair GD 12153

This heavy-duty hinge is constructed from heavy-duty 14 ga. steel. The roller tube accepts a standard 7/16 in. diameter stem roller. This style hinge is used by most garage door manufacturers. | Prime-Line Heavy Duty Standard Garage Top Roller Fixture... ... more

Prime-Line Surface Mounted Hinge Set, Right Hand In/Left Hand Out, w/ Fasteners, Finish (1 Set) in Gray | 2 H x 4 W x 3.5 D in | Wayfair 656-9009

This is a surface mount door hinge set that is right-hand in, left-hand out for use on right-hand inswing and left-hand outswinging doors. They are self-closing. The hinges are constructed of satin stamped stainless steel. The package includes the top... ... more

Prime-Line Surface Mount Hinge Set, Right Hand In/Left Hand Out w/ Fasteners, Chrome Plated Brass (1 Set) in Gray | 2 H x 4 W x 3.5 D in | Wayfair

This is a surface mount door hinge set right-hand in, left-hand out used for use on right-hand inswing and left-hand outswinging doors. They are self-closing. The hinges are constructed of chrome plated brass. The package includes the top and bottom... ... more

Prime-Line Surface Mounted Hinge Set, Left Hand In/Right Hand Out, w/ Fasteners, Stainless Steel in Gray | 2 H x 4.13 W x 3.5 D in | Wayfair

This is a surface mount door hinge set that is left-hand in, right-hand out for use on left-hand inswing and right-hand out-swinging doors. They are self-closing. The hinges are constructed of satin stamped stainless steel. The package includes the top... ... more

Prime-Line Surface Mounted Hinge Set, Right Hand In/Left Hand Out, w/ Fasteners, Finish (1 Set) in Gray | 2 H x 4 W x 3.5 D in | Wayfair 656-9009

This is a surface mount door hinge set that is right-hand in, left-hand out for use on right-hand inswing and left-hand outswinging doors. They are self-closing. The hinges are constructed of satin stamped stainless steel. The package includes the top... ... more

Prime-Line T-Latching Handle, Steel in Black | 3.4 H x 4.1 W x 34.8 D in | Wayfair GD 12228

This Prime-Line GD 12228 Garage Door Torsion Spring includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion garage springs replacement provide lifting force for heavy garage doors and must be... ... more

Prime-Line Pivot Hinge Set, 3/4 in. & 1 in, Stainless Steel (Single Pack) Stainless Steel in Gray | 1.75 H x 5.13 W x 4 D in | Wayfair 650-6040

This is a high security latch lip strike that is constructed of stamped steel and it comes in a brass plated finish. Designed to replace a standard strike plate for maximum security. Installation of this strike strengthens a locked door with six, 3 in.... ... more

Prime-Line Inside Deadlock Heavy Duty Steel in Black | 3.38 H x 4 W x 34.5 D in | Wayfair GD 12308

This Prime-Line GD 12308 Garage Door Torsion Spring includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion garage springs replacement provide lifting force for heavy garage doors and must be... ... more

Prime-Line Aluminum Ferrules & Stops in Black | 3.13 H x 4 W x 34.5 D in | Wayfair GD 12317

This Prime-Line GD 12317 Garage Door Torsion Spring includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion garage springs replacement provide lifting force for heavy garage doors and must be... ... more

Prime-Line Galvanized Cable Clamp, Steel in Black | 3.38 H x 4 W x 34.5 D in | Wayfair GD 12225

This Prime-Line GD 12225 Garage Door Torsion Spring includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion garage springs replacement provide lifting force for heavy garage doors and must be... ... more

Prime-Line Zinc Hinge Pin Stop Metal | 7.8 H x 3.8 W x 1.2 D in | Wayfair U 10131-4

Hinge pin door stops install over the door hinge using existing hinge pin. They are used in cases where floor mounted and wall mounted door stops may be found to be unsightly. They can be adjusted to accommodate desired stopping position, which makes... ... more

Prime-Line Zinc Hinge Pin Stop Metal in Gray | 7.8 H x 3.8 W x 1.2 D in | Wayfair U 10129-4

Hinge pin door stops install over the door hinge using existing hinge pin. They are used in cases where floor mounted and wall mounted door stops may be found to be unsightly. They can be adjusted to accommodate desired stopping position, which makes... ... more

Prime-Line 1-1/4 in. Steel Ball Bearing Door Roller Assembly, for Viking (Single Pack) in Yellow | 5.4 H x 3.75 W x 0.95 D in | Wayfair D 1729

This is a E-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 19/32 in. wide with... ... more

Prime-Line Steel Door Roller in Gray | Wayfair GD 52103

This is a standard door roller with a convex edge, suitable for use with 2 in. track garage doors. It has a 1-7/8 in. roller diameter, 1/2 in. roller width. Nylon ball bearing roller. Standard shaft length of 3-5/8in. | Prime-Line Steel Door Roller in... ... more

Prime-Line Plated, Dead Latch Door Strike (Single Pack), Steel in Yellow | 5.4 H x 0.3 D in | Wayfair E 2308

These standard latch strikes are constructed of steel and come in a antique brass plated finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners... ... more

Prime-Line Plated, Dead Latch Door Strike (Single Pack), Steel in Yellow | 5.4 H x 0.3 D in | Wayfair E 2308

These standard latch strikes are constructed of steel and come in a antique brass plated finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners... ... more

Prime-Line 1-1/8 in. Steel Ball Bearing Door Roller Assembly, for Viking (Single Pack) in Yellow | 5.4 H x 3.75 W x 1.2 D in | Wayfair D 1540

This is a E-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 19/32 in. wide with... ... more

The Renovators Supply Inc. 3.4" H x 12" W Door Hinge | 3.4 H x 12 W x 0.22 D in | Wayfair 22158

Black Wrought Iron Decorative Dummy Hinge Straps for Garages Gates, Barns Doors and More. Poseidon Trident Antique Design. 12" Length 3.4" Wide. Hardware Included. Add design flare to Doors, Walls, Gates with these decorative dummy hinge straps. | The... ... more

Prime-Line Kick Plate in Pink/White | 5.4 H x 3.75 W x 0.55 D in | Wayfair E 2483

This 2-piece high security deadbolt strike replaces standard exterior residential deadbolt strikes, and it increases security to entry doors. This item includes one 2-piece strike plate per package with fasteners. Pilot holes for 3 in. screw... ... more

Prime-Line 1-1/2 in. Steel Ball Bearing Tandem Roller Assembly, for Fleetwood (Single Pack) in Yellow | 8.4 H x 3.75 W x 0.9 D in | Wayfair D 1844

This is an E-tab tandem roller assembly with two 1-1/2 in. concave steel ball-bearing rollers. As the corner screw passes through the E- tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 11/16 in. wide with... ... more

Prime-Line Steel Ball Bearing Rollers in Gray/Yellow | 5.4 H x 3.8 W x 0.65 D in | Wayfair D 1502

This is a 1-1/4 in. diameter concave nylon ball bearing roller replacement used on a variety of patio, and wardrobe door roller assemblies. It has a steel center race and the standard 1/4 in. axle hole and is 5/16 in. wide. Included are 2 axle carriage... ... more

Prime-Line Steel Ball Bearing Rollers in Gray/Yellow | 5.4 H x 3.8 W x 0.65 D in | Wayfair D 1502

This is a 1-1/4 in. diameter concave nylon ball bearing roller replacement used on a variety of patio, and wardrobe door roller assemblies. It has a steel center race and the standard 1/4 in. axle hole and is 5/16 in. wide. Included are 2 axle carriage... ... more

Prime-Line Steel Ball Bearing Rollers in Gray/Yellow | 5.4 H x 3.8 W x 0.65 D in | Wayfair D 1504

This is a 1-1/4 in. diameter concave nylon ball bearing roller replacement used on a variety of patio, and wardrobe door roller assemblies. It has a steel center race and the standard 1/4 in. axle hole and is 5/16 in. wide. Included are 2 axle carriage... ... more

Prime-Line Steel Ball Bearing Rollers in Gray | 5.4 H x 3.8 W x 0.65 D in | Wayfair D 1500

This is a 1-1/4 in. diameter concave nylon ball bearing roller replacement used on a variety of patio, and wardrobe door roller assemblies. It has a steel center race and the standard 1/4 in. axle hole and is 5/16 in. wide. Included are 2 axle carriage... ... more