You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... ... more | go to store |
 | This is a plain back tandem roller assembly used by Smith and Carry and a variety of other sliding patio door manufacturers of metal framed patio doors. It has an in-line tandem inner housing with 1-1/2 in. concave steel ball bearing rollers set in a... ... more | go to store |
| Best Seller  | This is a 1-1/4 in. diameter concave Precision steel ball bearing roller replacement, used on several patio and wardrobe door roller assemblies. Precision rollers are made of hardened steel and have a sealed ball bearing race. It has a 7/32 in. built... ... more | go to store |
 | This is a B-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/16 in. tall with a flare width of 13/16 in.. The B- tab secures the assembly as the mounting screw is driven up through the B-tab hole and into the... ... more | go to store |
 | This is a unique, one of a kind, trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... ... more | go to store |
 | This is a 1-1/2 in. diameter concave Precision steel ball bearing roller replacement, used on several patio and wardrobe door roller assemblies. Precision rollers are made of hardened steel and have a sealed ball bearing race. It has a 7/32 in. built... ... more | go to store |
 | These patio door and screen door rollers are constructed of a stainless steel wheel and stainless steel ball bearings. These replacement wheels have a concave (center grooved) edge and are for use over raised-edge, sliding door tracks. This type of... ... more | go to store |
 | This is a stainless steel unique housing tandem roller assembly, often found on Andersen sliding patio doors as well as a variety of other manufacturers of wood patio doors. It has two 1-1/4 in. concave stainless steel ball bearing rollers set in a... ... more | FREE shipping go to store |
 | These shower door rollers are constructed of durable plastic and include a threaded hex hub manufactured into each wheel. Wheels like these are used to replace missing or damaged wheels on shower door roller assemblies and the like. These rollers... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and... ... more | go to store |
 | This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... ... more | go to store |
 | This sliding screen door roller assembly fits onto the spring-loaded arm of a Columbia corner insert. The roller housing is stamped steel with a 1 in. steel ball bearing roller installed. These rollers are a replacement roller for the discontinued... ... more | go to store |
 | This is a reversed F-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/8 in. tall with a flare width of 13/16 in.. There are two 1-1/4 in. concave or grooved steel ball bearing rollers. Used by Fleetwood and a... ... more | go to store |
 | This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
 | This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
 | This is an E-tab tandem roller assembly with two 1-1/2 in. concave steel ball-bearing rollers. As the corner screw passes through the E- tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 11/16 in. wide with... ... more | go to store |
 | This is an extra heavy-duty plain back, tandem roller assembly used by Kawneer on their heavy doors. Often found in Hawaii used on door walls, it has an in-line tandem inner housing with 1-1/2 in. concave or grooved steel ball bearing rollers set in a... ... more | go to store |
 | This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/4 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is a plain... ... more | go to store |
 | This is a unique tandem roller assembly with two 1-1/4 in. concave steel ball-bearing rollers installed. The square-shaped housing is 11/16 in. wide, 1-1/2 in. tall, and 4-1/2 in. long. It has an end adjustment screw and two mounting tabs at each end... ... more | go to store |
 | This is a C-tab tandem roller assembly with two 1-1/8 inch steel ball-bearing rollers. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16... ... more | go to store |
 | This is a unique housing tandem roller assembly most often found on Andersen wood patio doors as well as a variety of other manufacturers of wood patio doors. It has tandem 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a... ... more | go to store |
 | This is a plain back tandem plain back roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable. Used by Keller as well as a variety of other manufacturers, primarily on vinyl patio... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/8 in. concave steel ball bearing rollers. The stamped steel housing is adjustable and used by Milgard as well as a variety of other manufacturers. Primarily used on vinyl patio doors. The housing... ... more | go to store |
 | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door corner... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
 | This is a C-tab stainless steel tandem roller with two 1-1/4 in. concave or grooved stainless steel ball bearing rollers installed. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The... ... more | FREE shipping go to store |
 | This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other manufacturers, primarily on vinyl patio doors. The housing is... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide, 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting... ... more | go to store |
 | This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has the unique housing that is 15/16 in. wide and 1-5/16 in. tall. It is rear adjusting with a 10-24 threaded mounting hole and mounting... ... more | go to store |
 | Easily operate your screen door with the Prime-Line sliding screen door corner assembly. An all-in-one corner and roller combination, the corner fits into the frame to hold the bottom or top rails and the side stiles together. This assembly is used on... ... more | go to store |
 | This is a plain back tandem wheel roller assembly that is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved (center grooved) edge and features a steel inner race, steel ball bearings and a 5/16 in. roller... ... more | go to store |
 | This is a steel tandem C-tab roller assembly with 1-1/4 in. steel ball bearing rollers. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16 in.... ... more | go to store |
 | This Mirror Door Roller is constructed from nylon and comes affixed to a steel housing. It features an adjustable bottom mount design. This style roller is used on manufacturers mirror door and similar style doors. Size: 0.6" H x 1.13" W x 1.7" D |... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
 | This is an S-tab tandem roller assembly with two 1-1/2 in. concave nylon ball bearing rollers. When the corner screw passes through the S-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
 | This Mirror Door Roller is constructed from nylon and comes affixed to a steel housing. It features an adjustable bottom mount design. This style roller is used on manufacturers mirror door and similar style doors. Size: 0.6" H x 1.13" W x 1.7" D |... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other vinyl patio door manufacturers. The housing is 3/4 in. wide and 1... ... more | go to store |
Ads related to Prime-Line D 1858 Tandem Roller Assembly with Ball Bearings Steel 1-1/4 In. - Quantity 6
