Power Tools › Irwin › lenox speed slot 2 3

Irwin Unibit 3/16 to 1/2 in. x 6 in. L High Speed Steel Step Drill Bit 1 pc.

Drill a range of holes without changing bits more

#2 Unibit Self-Starting Stairstep Bit 6-Step 3/16 To 1/2 Dia 3/8 Depth

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

Irwin Tools UniBit 3/16-Inch to 1/2-Inch Step-Drill Bit 1/4-Inch Shank 10232

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

IRWIN UNIBIT 2 Step Drill Bit, 6 Hole Sizes, 3/16 in to 1/2 in, 1/16 Step

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 1/4 in Overall Length, Maximum Drilling Depth 5/16 in more

Irwin 5/8 - 1-3/4 in. Dia. x 5-1/2 in. L High Speed Steel Wood Boring Bit 7/16 in. 6-Flat Shank 1 pc.

Lockhead Drill Press Adjustable Wood Bit 2 Cutters: 5/8 -1 and 1 -1-3/4 9/32 Shank Size 5-1/2 Overall Length Wedge Type Blade Lock and Slow Feed SScrew Point Special Precision Ground Shank Has 3 Equally Spaced Flats For Use In Drill Presses Having 3... more

Irwin 5/8 to 1-3/4 in. X 5-1/2 in. L High Speed Steel Adjustable Wood Boring Bit 1 pc

IRWIN Drill Press Adjustable Wood Bits features adjustable cutting blade bores a variety of hole sizes more

IRWIN 44801 Adjustable Spade Bit

Adjustable Spade Drill Bit, 1 3/4 in Drill Bit Size, Straight, High Speed Steel, Shank Diameter 1/4 in, Overall Length 5 1/2 in, Bright (Uncoated), Maximum Drilling Depth 4 in more

Irwin 1 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3-Flat Secure-Grip hammer/drill bits provide superiority in regards to quality performance and longevity of life. The 3-Flat Secure-Grip shank is designed to fit in all 1/2 inch 3-jaw hammer/drill chucks and reduces the possibility of the bit spinning... more

Irwin 5/8 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53 HRC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

Irwin Tools 3041001 Speedbor Max Speed Standard Length Drill Bit 1/2 x 6 Each

Tri-flute design for faster chip ejection. Cutting spurs have 3 cutting edges for added durability. Full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension. Fits all standard 1/4 quick change chucks.... more

Irwin Tools 10231 Unibit 13-Hole High Speed Step Drill 1/8 To 1/2

#1 Unibit; 1/8 To 1/2 Step Drill; 13 Hole Sizes From 1/8 To 1/2 In 1/32 Increments; Maximum Material Thickness 1/8 ; 3 Flatted Shank; Shank Size 1/4 ; Single Fluted Cutting Edge Assures True Round Holes & Allows Greater Control; Carded. more

IRWIN UNIBIT 1 Step Drill Bit, 13 Hole Sizes, 1/8 in to 1/2 in, 1/32 in Step

Step Drill Bit, High Speed Steel, Black Oxide, 1/8 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 3/16 in Overall Length, Maximum Drilling Depth 1/8 in more

Hanson BIT DRI 3/32 TURBOMAX CARDED 2 PCK

Features and Benefits: Revolutionary tip design stays sharper longer and drills up to 10 times faster than other leading drill bits High speed steel features a black body and gold flute Self-centering Turbomax tip for clean entry and fast starts; stays... more

Irwin Turbomax Multi Size Dia. x Multiple L High Speed Steel Drill Bit Set Straight Shank 15 pc.

Turbo point for no slip starting on hard materials prevents walking of drill bit. Gold oxide coating for additional corrosion resistance. Can be used for drilling in metal wood or plastic. Jobber length. Set includes: (2) 1/16 5/64 (2) 3/32 7/64 (2)... more

Hanson HSDR12A/CD 3/8

Features and Benefits: Ideal for drilling in hard-to-reach areas and for running wires and cable Bit is constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance For general use in wood metal and... more

Hanson HS DR CD 3/8

Features and Benefits: Constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance Standard 118 degree point for use in wood metal and plastic Overall length: 3-1/8 more

Irwin Speedbor 2 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Speedbor 1-1/2 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Speedbor 2-1/4 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Speedbor 2-9/16 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Hanson BIT DRI 7/64 TURBOMAX CARDED 2 PCK

Features and Benefits: Self centering tip for clean fast starts Jet Pointr tip for clean entry and faster drilling and stays sharp Drills more holes and is faster than other leading drill bits High speed steel features a black body and gold flute Three... more

Hanson 8PC S&D DR-8-PC SET

Features and Benefits: 8-piece 1/2 reduced shank silver & deming high speed steel drill bit set Constructed of M-7 high speed steel for high resistance to abrasion Three flatted shank design provides better chuck grip while reducing slippage Ideal for... more

IRWIN UNIBIT 4 Unibit #4 Step Drill Bit, 12 Hole Sizes, 3/16 to 7/8 in, 1/16 in

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 7/8 in Size Range, Straight with Three Flats, 3/8 in Shank Diameter, 2 7/8 in Overall Length, Maximum Drilling Depth 1/8 in more

IRWIN 45002 Adjustable Spade Bit

Adjustable Spade Drill Bit, 3 in Drill Bit Size, Straight, High Speed Steel, Shank Diameter 11/32 in, Overall Length 6 1/2 in, Bright (Uncoated), Maximum Drilling Depth 5 in more

Lenox Speed Slot 3-1/2 in. Dia. x 1.5 in. L Bi-Metal Hole Saw 1 pc.

Lenox Industries Tuff Tooth bi-metal hole saw. Patented design resists tooth strippage High speed steel teeth resist breaking and offer extended life Tuff Tooth design is reinforced to cut stronger and last longer Thick backing plate with holes for... more

LENOX Tools Bi-Metal Speed Slot Hole Saw with T3 Technology 2-5/8

The LENOX Tools Bi-Metal Speed Slot Hole Saw with T3 2-5/8 -67mm has enhanced tooth geometry that cuts 50% faster than previous LENOX hole saws. Twice as durable as our previous generation when cutting through metal this bi-metal hole saw features... more

Lenox Speed Slot 1-5/8 in. Dia. x 1.5 in. L Bi-Metal Hole Saw 1 pc.

1-5/8 inch Cutting Depth electron Beam Welded M-2 High Speed Steel spring Steel Back Positive Rake Tooth cutting Edge Rc 63-65 Vari-Tooth Design suggested Rpm 230 For Mild Steel 115 For Tool And Stainless Steel 150 For Cast Iron 300 For Brass And 345... more

IRWIN 15102 HSS Step Drill Bit 6 Sizes, 3/16-1/2"

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 1/2 in Size Range, Straight with Three Flats, 1/4 in Shank Hex Size, 3/8 in Shank Diameter, 2 11/16 in, 2 7/8 in, 3 3/16 in, 3 1/4 in Overall Length, Maximum Drilling Depth 1/8 in, 5/16 in more

IRWIN 15103 HSS Step Drill Bit 9 Sizes, 1/4-3/4", Shank Type: Hex

Step Drill Bit, High Speed Steel, TiN, 1/4 in to 3/4 in Size Range, Straight with Three Flats, 3/8 in Shank Diameter, 2 1/2 in Overall Length, Maximum Drilling Depth 1/8 in more

IRWIN 10225 Step Drill Bit Set,HSS,1/8-1-3/8 In,4 pc

Step Drill Bit Set, High Speed Steel, Black Oxide, 1/8 in to 1/2 in, 13/16 in to 1 3/8 in, 3/16 in to 1/2 in, 3/16 in to 7/8 in Size Range, Straight with Three Flats, Number of Drill Bits 3, Shank Hex Size 1/4 in, 3/8 in, 7/16 in more

Lenox Speed Slot 1-7/8 in. Dia. x 1.5 in. L Bi-Metal Hole Saw 1 pc.

Lenox Speed Slot Bi-metal hole saw features a staircase design for easy plug removal. It has a sleek slit and enhanced tooth geometry for efficient cutting process. Hole saw has 1-7/8-inch diameter. It fits 2L/6L snap-back arbor and 2L/3L/6L/7L... more

Irwin 81105 High Speed Steel Wire Gauge Drill Bit 2-1/2 x 3-3/4

Irwin Wire Gauge Drill Bit - Used where more precisely sized holes are required. Drills exact hole size - ideal for tapping. Bit is constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance. For use in... more

Irwin 2-3/16 in. X 3-3/8 in. L High Speed Steel Wire Gauge Bit 1 pc

The Irwin tools for basic drilling applications in more

Irwin 81117 High Speed Steel Wire Gauge Drill Bit 2-3/16 x 3-3/8 Each

Highlights: Bit number: #17 Twist length: 2-3/16 Overall length: 3-3/8 Use with display Catalog Id: 42925724 Used where more precisely sized holes are required Drills exact hole size ideal for tapping Bit is constructed of M-2 high speed steel for the... more

3Pc Irwin 3/16 in. X 3-1/2 in. L High Speed Steel Drill Bit 1 pc

Irwin Titanium Drill Bit Titanium nitride coating more

Irwin 81141 High Speed Steel Wire Gauge Drill Bit 1-3/8 x 2-3/8

Irwin Wire Gauge Drill Bit - Used where more precisely sized holes are required. Drills exact hole size - ideal for tapping. Bit is constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance. For use in... more

Irwin 1-3/8 in. X 2-3/8 in. L High Speed Steel Wire Gauge Bit 1 pc

The Irwin tools for basic drilling applications in more

Irwin 2-5/16 in. X 3-1/2 in. L High Speed Steel Wire Gauge Bit 1 pc

The Irwin tools for basic drilling applications in more