Power Tools › Micro 100 › lenox 1 8 to 1

Micro 100 Sq. End Mill Single End Carb 1/32 SEM-031-04X

Square End Mill 1/32 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 1/16 EMS-062-3

Square End Mill 1/16 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Carb End Mill 5/8 In 3FL CC Uncoated GEC-625-3-030

Corner Radius End Mill 5/8 in Milling Dia. Bright (Uncoated) Fractional Inch 0.030 in 1 1/4 in 3 1/2 in more

Micro 100 Carb End Mill 5/8 In 3FL CC Uncoated GEC-625-3-090

Corner Radius End Mill 5/8 in Milling Dia. Bright (Uncoated) Fractional Inch 0.090 in 1 1/4 in 3 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0200 rad VLM-500-5-090K

Corner Radius End Mill 1/2 in Milling Dia. Carbide nACRo Weldon Flat Fractional Inch 0.09 in 1 3/4 in 4 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0200 rad VHS-250-5-020

Corner Radius End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Fractional Inch 0.02 in 1/2 in 2 1/2 in more

Micro 100 Sq. End Mill Single End Carb 5/8 GEM-625-4

Square End Mill 5/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1 1/4 in Overall Length 3 1/2 in Shank Dia. 5/8 in more

Micro 100 Sq. End Mill Single End Carb 5/8 EMS-625-4

Square End Mill 5/8 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Length of Cut 1 1/4 in Overall Length 3 1/2 in Shank Dia. 5/8 in more

Micro 100 Drill Mill 3/8 Carbide AlTiN DM-500-490X

Drill Mill Carbide AlTiN 1/2 in Milling Dia. 90 Degrees more

Micro 100 Drill Mill 3/8 Carbide Bright DM-500-490

Drill Mill Carbide Bright (Uncoated) 1/2 in Milling Dia. 90 Degrees more

Micro 100 Single-Point Tool Bit 0.4460 Carbide ER-8

Single-Point Tool Bit ER Carbide Zinc Right Hand Shank Width 1/2 in more

Micro 100 Single-Point Tool Bit 0.1750 Carbide AR-8

Single-Point Tool Bit AR Carbide Zinc Right Hand Shank Width 1/2 in more

Micro 100 Single-Point Tool Bit 0.1750 Carbide AL-8

Single-Point Tool Bit AL Carbide Zinc Left Hand Shank Width 1/2 in more

Micro 100 Single-Point Tool Bit 0.4460 Carbide EL-8

Single-Point Tool Bit EL Carbide Zinc Left Hand Shank Width 1/2 in more

Micro 100 Engraving Tool 5/8 L of Cut Carbide RTC-500-2

Engraving Tool Double End 30 Degrees Carbide Bright (Uncoated) Fractional Inch .004 in 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0200 rad GEC-375-4-030X

Corner Radius End Mill 3/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.03 in 7/8 in 2 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0600 rad ARC-375-5-060X

Corner Radius End Mill 3/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.06 in 7/8 in 2 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0600 rad ARC-375-5-060

Corner Radius End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.06 in 7/8 in 2 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0200 rad VHM-375-5-020K

Corner Radius End Mill 3/8 in Milling Dia. Carbide nACRo Weldon Flat Fractional Inch 0.02 in 7/8 in 2 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0200 rad GEC-375-3-030

Corner Radius End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.03 in 7/8 in 2 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0100 rad GEC-375-4-010

Corner Radius End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 7/8 in 2 1/2 in more

Micro 100 Sq. End Mill Single End Carb 5/8 SHL-625-4X

Square End Mill 5/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 2 1/2 in Overall Length 5 in Shank Dia. 5/8 in more

Micro 100 Sq. End Mill Single End Carb 3/8 SHR-375-4X

Square End Mill 3/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Sq. End Mill Single End Carb 3/8 GEM-375-4X

Square End Mill 3/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Sq. End Mill Single End Carb 3/8 GEM-375-4

Square End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Sq. End Mill Single End Carb 3/8 GEM-375-3

Square End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Sq. End Mill Single End Carb 3/8 EMS-375-3

Square End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Sq. End Mill Single End Carb 3/8 EMS-375-4

Square End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Cor. Rad. End Mill 0.125 CR Carbide ARC-001-2-125S

Corner Radius End Mill 1 in Milling Dia. ZrN Fractional Inch 1/8 in 1 1/2 in 4 in more

Micro 100 Sq. End Mill Single End Carb 0.0150 RME-015-2X

Square End Mill 1/64 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/32 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0150 SME-015-2X

Square End Mill 1/64 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0220 RME-022-2X

Square End Mill 1/64 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0230 SME-023-2X

Square End Mill 1/64 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/32 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0280 SME-028-2X

Square End Mill 1/64 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/32 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0270 SME-027-2X

Square End Mill 1/64 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/32 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0290 SME-029-2X

Square End Mill 1/64 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/32 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0250 SME-025-2X

Square End Mill 1/64 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/32 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0200 SME-020-2X

Square End Mill 1/64 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more