Power Tools › Irwin › frcolor 3 pcs 1 pack

Irwin Speedhammer Plus 3/4 in. Dia. x 12 in. L Steel Drill Bit 1/4 in. SDS-Plus Shank 1 pc.

IRWIN hammer drill bits incorporate a patented new flute design that removes dust more efficiently for faster drilling and longer bit life. The carbide tip design also patented by IRWIN offers the optimum combination of speed and centering for more... more

Irwin Unibit 3/16 to 1/2 in. x 6 in. L High Speed Steel Step Drill Bit 1 pc.

Drill a range of holes without changing bits more

1 PC Irwin 3041020 Speedbor Max Speed Standard Length Drill Bit 1-3/8 x 6

Irwin Speedbor Max Speed 6 Standard Length Drill Bit Features Tapered Tri-Flute Design For Faster Chip Ejection And Less Binding. Cutting Spurs Have 3 Cutting Edges For Faster Cleaner Holes Less Breakout And Extended Drilling Life. Full Screw-Point Tip... more

Irwin 3/4 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3/4 inch Irwin 12 inch straight with 1/2 inch shank carbide tipped masonry drill bit carbide tipped for maximum wear resistance and capacity to withstand high impact patented flute geometry for faster chip removal 12 inch length for deep drilling... more

Irwin Speedhammer Plus 3/4 in. Dia. x 8 in. L Steel Drill Bit 1/4 in. SDS-Plus Shank 1 pc.

IRWIN hammer drill bits incorporate a patented new flute design that removes dust more efficiently for faster drilling and longer bit life. The carbide tip design also patented by IRWIN offers the optimum combination of speed and centering for more... more

1 PC Irwin Tools 3046009 Speedbor Max Self Feed Wood Drill Bit 1-3/4

Ideal For Pipe & Conduit Systems. 3 Times The Cutting Area & Edges Of Standard Self Feed Bits. For Drilling Large Diameter Holes In Wood Aggressive Screw Pitch. Precision Milled Shank Eliminates Run Out & Wobble. Forged In 1 Piece From High Carbon... more

Irwin WeldTec 3/4 in. Dia. x 17 in. L Auger Bit 7/16 in. Quick-Change Hex Shank 1 pc.

The Irwin with WeldTec ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard... more

Irwin 3/4 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 5/16 in. Hex Shank 1 pc.

Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter producing a... more

Irwin 3/4 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 1 pc.

IRWIN Auger Bit is for fast rough or clean and exact holes. Irwin s extensive line of woodboring drill bits provide the user with the best available tools for each application in achieving their drilling needs. more

Irwin Marathon 5-3/8 in. Dia. x 10 mm Carbide Circular Saw Blade 18 teeth 1 pc.

The Irwin Tools Marathon 14015 5-3/8 inch x 18 tooth Framing/Ripping Cordless Circular Saw Blade has a 10 mm Arbor and fits most 5-3/8 inch Cordless Circular Saws. The Ultra Thin Kerf provides more cuts per charge and extends the life of the battery.... more

Irwin 3/8 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 5/16 in. Hex Shank 1 pc.

Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter producing a... more

2Pc Irwin 3/16 in. X 6 in. L High Speed Steel Split Point Drill Bit 1 pc

IRWIN 6 Aircraft Extension High Speed Steel Fractional Straight Shank Drill Bits are Ideal for drilling in hard-to-reach areas and for running wires and cable more

1 PC Irwin 73312 TurboMax HSS Straight Shank Jobber Length Drill Bit 3/16

Irwin Turbomax High Speed Steel Straight Shank Jobber Length Drill Bit Features Self-Centering Turbomax Tip For Clean Entry And Fast Starts; Stays Sharp Longer. High Performance Metal Drilling For Portable Drill Users Works Well On Curved Surfaces.... more

Irwin Speedbor Steel Wood Boring Bit 1/4 in. Quick-Change Hex Shank 3 pc.

Blue-Groove point and cutting edge for faster chip removal. Double cutting spurs scribe the outside of the hole reducing breakout. 10 percent larger shank for added durability. Grooved Hex shank prevents slipping in drill chuck or bit extension. more

Irwin 3/8 in. X 6 in. L High Speed Steel Percussion Drill Bit 1 pc

IRWIN Rotary Percussion Bits has patented flute geometry to remove dust from the hole quicker for fast drilling and long life more

Irwin 1 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3-Flat Secure-Grip hammer/drill bits provide superiority in regards to quality performance and longevity of life. The 3-Flat Secure-Grip shank is designed to fit in all 1/2 inch 3-jaw hammer/drill chucks and reduces the possibility of the bit spinning... more

Irwin Speedbor 1-1/8 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Speedbor 1-1/2 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Speedbor 1-1/4 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Speedbor 2-1/4 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin 5/8 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53 HRC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

Irwin Speedbor 2 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Hanson HAN372818P5 Hanson 8-Inch Metal Cutting Reciprocating Bi-Metal Blades with 18 TPI .035-Inch Thickness (Pack of 5)

Metal Cutting Reciprocating Bi-Metal Blades Features: ? Cuts all metals including nonferrous pipe conduit stainless steel and sheet metals ? Use with materials 1/8 - 1/2 (3.2 - 13 mm) thick ? Bi-metal construction for faster cutting and added... more

Screw Extractor Set 10 Pcs

Screw Extractor Set Extractor Type Hex Head Multi-Spline Screw Extractor Number of Pieces 10 Drill Size 1/8 in to 13/32 in For Screw Type Socket For Bolt Size #12 1/4 in to 3/4 in Material - Machining Carbon Steel Container Type Plastic Case Drive Size... more

Irwin Turbomax Multi Size Dia. x Multiple L High Speed Steel Drill Bit Set Straight Shank 15 pc.

Turbo point for no slip starting on hard materials prevents walking of drill bit. Gold oxide coating for additional corrosion resistance. Can be used for drilling in metal wood or plastic. Jobber length. Set includes: (2) 1/16 5/64 (2) 3/32 7/64 (2)... more

Hanson 8PC S&D DR-8-PC SET

Features and Benefits: 8-piece 1/2 reduced shank silver & deming high speed steel drill bit set Constructed of M-7 high speed steel for high resistance to abrasion Three flatted shank design provides better chuck grip while reducing slippage Ideal for... more

IRWIN 316015 15-pc. Jobber Length Drill Set, Cobalt Alloy Steel

Jobber Length Drill Set, Number of Drill Bits 15, 135 Degrees Drill Bit Point Angle, Drill Bit Point Type Conventional Point, High Speed Steel, Black Oxide, Drill Bit Sizes Included 1/16 in, 1/4 in, 1/8 in, 3/16 in, 3/32 in, 3/8 in, 5/16 in, 5/32 in,... more

IRWIN 3094001 Extractor Set,5 PC,w/Bolt Extractors

Screw Extractor Set, Extractor Type Reverse Spiral Flute Deep Well Bolt Extractor, Number of Pieces 5, For Bolt Size 1/2 in, 3/8 in, 5/8 in, 7/16 in, 9/16 in, Material - Machining Carbon Steel, Container Type Case, Drive Size 3/8 in, Drive Type Square more

2Pc Irwin 11/64 in. x 3-1/4 in. L Cobalt Steel Drill Bit 1 pc. (Pack of 3)

11/64 Cobalt Bit 135 Degree Split Point To Minimize Walk 8% Cobalt For Higher Heat & Abrasion Resistance Heavy Duty Web Construction For Strength & Durability For Tough Metal Drilling Including Heavy Duty Abrasive Alloy Metal Drilling On Hard more

Irwin 15/64 in. x 3-7/8 in. L Cobalt Steel Drill Bit 1 pc. (Pack of 3)

15/64 Cobalt Bit 135 Degree Split Point To Minimize Walk 8% Cobalt For Higher Heat & Abrasion Resistance Heavy Duty Web Construction For Strength & Durability For Tough Metal Drilling Including Heavy Duty Abrasive Alloy Metal Drilling On Hard more

2Pc Irwin 9/64 in. x 2-7/8 in. L Cobalt Steel Drill Bit 1 pc. (Pack of 3)

9/64 Cobalt Bit 135 Degree Split Point To Minimize Walk 8% Cobalt For Higher Heat & Abrasion Resistance Heavy Duty Web Construction For Strength & Durability For Tough Metal Drilling Including Heavy Duty Abrasive Alloy Metal Drilling On Harde more

IRWIN 15502 HSS Step Drill Bit Set 1/8-3/4", 3 pc.

Step Drill Bit Set, High Speed Steel, TiN, 1/4 in to 3/4 in, 1/8 in to 1/2 in, 3/16 in to 1/2 in Size Range, Straight with Three Flats, Number of Drill Bits 3, Shank Hex Size 1/4 in more

IRWIN 10225 Step Drill Bit Set,HSS,1/8-1-3/8 In,4 pc

Step Drill Bit Set, High Speed Steel, Black Oxide, 1/8 in to 1/2 in, 13/16 in to 1 3/8 in, 3/16 in to 1/2 in, 3/16 in to 7/8 in Size Range, Straight with Three Flats, Number of Drill Bits 3, Shank Hex Size 1/4 in, 3/8 in, 7/16 in more

IRWIN 3018010 18-pc. Jobber Length Drill Set, Titanium Nitride Coating

Jobber Length Drill Set, Number of Drill Bits 18, 135 Degrees Drill Bit Point Angle, Drill Bit Point Type Conventional Point, High Speed Steel, TiN, Drill Bit Sizes Included 1/16 in, 1/2 in, 1/4 in, 1/8 in, 11/64 in, 13/64 in, 3/16 in, 3/32 in, 3/8 in,... more

Irwin Turbomax High Speed Steel Straight Shank Multi Size Dia. Drill Bit Set 15 pc.

Brand Name: Irwin Sub Brand: Turbomax Material: High Speed Steel Shank Type: Straight Shank Drill Bit Diameter: Multi Size Product Type: Drill Bit Set Number of Pieces: 15 pc. Packaging Type: Pack Includes: 1/16"-3/8" more

2Pc Irwin 7/64 in. x 2-5/8 in. L Cobalt Steel Drill Bit 1 pc. (Pack of 3)

7/64 Cobalt Bit 135 Degree Split Point To Minimize Walk 8% Cobalt For Higher Heat & Abrasion Resistance Heavy Duty Web Construction For Strength & Durability For Tough Metal Drilling Including Heavy Duty Abrasive Alloy Metal Drilling On Harde more

Irwin 3/8 in. x 5 in. L High Speed Steel Drill Bit 1 pc. (Pack of 6)

Drill bit is constructed of M 2 high speed steel f more

Irwin Speedhammer Plus 5/16 in. Dia. x 6 in. L Steel Drill Bit 1 pc. - Case Of: 1; Each Pack Qty: 1

SDS-plus Standard Tips 9 1/2 in 5/16 in Dia. Irwin SDS-plus Standard Tips WARNING: Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth... more