Power Tools › colonial mills 6 x 9

Bosch HC2093 9/16 in. x 6 in. Bulldog SDS-Plus Carbide-Tipped Rotary Hammer Bit

Bit diameter of 9/16 in useable length of 6 in. and an overall length of 8 in. Centric active tip guides bit through concrete and provides rounder holes Drills 15% faster in concrete compared to S4L Optimized brazing and hardening process for long life... more

BOSCH HC2093 2-Cutter Hammer Drill Bit 9/16" x 8"L, SDS Plus

Rotary Hammer Drill, SDS Plus, 9/16 in, Carbide, 8 in Overall Length, Maximum Drilling Depth 6 in, Shank Diameter 25/64 in, Bright (Uncoated) more

ER70S-6 - MIG Mild & Low Alloy Steel Wire - 2 Lb x 0.030 (2 SPOOLS)

ER70S-6 - WIRE - MIG (GMAW) - MILD & LOW ALLOY STEEL AWS A5.18 Welding Positions: All INTRODUCTION: Mild steel solid MIG wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. Copper-plated and layer wound.... more

ER70S-6 - MIG Mild & Low Alloy Steel Wire - 2 Lb x 0.030 (4 SPOOLS)

ER70S-6 - WIRE - MIG (GMAW) - MILD & LOW ALLOY STEEL AWS A5.18 Welding Positions: All INTRODUCTION: Mild steel solid MIG wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. Copper-plated and layer wound.... more

ER70S-6 - MIG Mild & Low Alloy Steel Welding Wire - 33 Lb x 0.023

ER70S-6 - WIRE - MIG (GMAW) - MILD & LOW ALLOY STEEL AWS A5.18 Welding Positions: All INTRODUCTION: Mild steel solid MIG wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. Copper-plated and layer wound.... more

ER70S-6 - MIG Mild & Low Alloy Steel Wire - 2 Lb x 0.035 (4 SPOOLS)

ER70S-6 - WIRE - MIG (GMAW) - MILD & LOW ALLOY STEEL AWS A5.18 Welding Positions: All INTRODUCTION: Mild steel solid MIG wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. Copper-plated and layer wound.... more

ER70S-6 - MIG Mild & Low Alloy Steel Wire - 11 Lb x 0.035 - (3 SPOOLS)

ER70S-6 - WIRE - MIG (GMAW) - MILD & LOW ALLOY STEEL AWS A5.18 Welding Positions: All INTRODUCTION: Mild steel solid MIG wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. Copper-plated and layer wound.... more

WEN 6-Inch x 48-Inch 120-Grit Belt Sander Sandpaper 3-Pack

Remember when the surface of your wood had a nice and smooth finish? The WEN 120-Grit 6 x 48-Inch Belt Sander Sandpaper package includes three pieces of high-quality sandpaper designed to fit with the WEN 6509 6 x 48 in. Belt and 9 in. Disc Sander. And... more

Irwin 5/8 - 1-3/4 in. Dia. x 5-1/2 in. L High Speed Steel Wood Boring Bit 7/16 in. 6-Flat Shank 1 pc.

Lockhead Drill Press Adjustable Wood Bit 2 Cutters: 5/8 -1 and 1 -1-3/4 9/32 Shank Size 5-1/2 Overall Length Wedge Type Blade Lock and Slow Feed SScrew Point Special Precision Ground Shank Has 3 Equally Spaced Flats For Use In Drill Presses Having 3... more

4 X 1/16 X 3/8 CUT-OFF W

FeaturesResin bonded reinforced cut-off wheelFor steel cutting on many applicationsUse on die grindersSpecifications : No Dimension: 1.1 H x 4.9 W x 7.6 LWeight: 0.7 lbs- SKU: EGLE36800 more

LENOX 20523B966R 9" L x 6 TPI Demolition Cutting Steel Reciprocating Saw Blade,

Reciprocating Saw Blade, Primary Material Application Demolition, Materials Cut Nail-Embedded Wood, Blade Length 9 in, Teeth per Inch 6, Cut Width 0.062 in, Blade Material Bi-Metal, Tip Material Bi-Metal Tipped, Back Style Straight, Number of Cutting... more

MILWAUKEE TOOL 49-22-1129, 48-00-5184 6", 9" L x 14, 18, 5, 8 TPI General

Reciprocating Saw Blade Set, Teeth per Inch 14, 18, 5, 8 more

LENOX 20558B956R 9" L x 6 TPI Nail Embedded Wood Cutting Bi-metal Reciprocating

Reciprocating Saw Blade, Primary Material Application Wood, Materials Cut Nail-Embedded Wood, Wood, Blade Length 9 in, Teeth per Inch 6, Cut Width 0.05 in, Blade Material Bi-Metal, Tip Material Bi-Metal Tipped, Back Style Straight, Tapered, Number of... more

LENOX 121439KPE 6", 8", 9" L x 6, 10, 18, 24 TPI General Purpose Cutting Steel

Reciprocating Saw Blade Set, Primary Material Application General Purpose, Materials Cut Ferrous Metals, Blade Length 6 in, 8 in, 9 in, Teeth per Inch 6, 10, 18, 24, Cut Width 0.035 in, 0.042 in, 0.05 in, Blade Material Steel, Tip Material Bi-Metal... more

DEWALT DW5442 9/16" x 4" x 6" SDS+ Hammer Bit

Rotary Hammer Drill, SDS Plus, 9/16 in, Carbide Tipped, 6 in Overall Length, Maximum Drilling Depth 4 in, Shank Diameter 25/64 in, Bright (Uncoated) more

JET 708597K 6 in. x 48 in. Belt / 9 in. Disc Combination Sander w/ Closed Stand

This JSG-96CS 6-Inch by 48-Inch Belt / 9-inch Disc Sander with Closed Stand 3/4 HP 1Ph 115V from JET® combines two different types of sanding motions in a single machine. The 48-Inch belt allows you to complete your long straight sanding jobs and the... more

Accupro 9/16 2 LOC 9/16 Shank Diam 6 OAL 4 Flute Solid Carbide Square End Mill Single End AlTiN Finish Spiral Flute 40° Helix Centercutting Right Hand Cut Right Hand Flute

Accupro 9/16 2 LOC 9/16 Shank Diam 6 OAL 4 Flute Solid Carbide Square End Mill Single End AlTiN Finish Spiral Flute 40° Helix Centercutting Right Hand Cut Right Hand Flute more

Accupro 9/16 2 LOC 9/16 Shank Diam 6 OAL 4 Flute Solid Carbide Square End Mill Single End Uncoated Spiral Flute 40° Helix Centercutting Right Hand Cut Right Hand Flute

Accupro 9/16 2 LOC 9/16 Shank Diam 6 OAL 4 Flute Solid Carbide Square End Mill Single End Uncoated Spiral Flute 40° Helix Centercutting Right Hand Cut Right Hand Flute more

GS Tooling 103933 9/16 Diameter x 9/16 Shank 4-Flute Regular Length Blue Series Carbide End Mill

• Mill Diameter (Inch): 9/16 • Number of Flutes: 4 • Material: Solid Carbide • Length of Cut (Inch): 1-1/8 • Shank Diameter (Inch): 9/16 • Finish/Coating: Bright • Single or Double End: Single • Center Cutting: Yes • Overall Length... more

GS Tooling 102850 9/16 Diameter x 9/16 Shank 4-Flute Regular Length Yellow Series Carbide End Mill

• Mill Diameter (Inch): 9/16 • Number of Flutes: 4 • Material: Solid Carbide • Length of Cut (Inch): 1-1/8 • Shank Diameter (Inch): 9/16 • Finish/Coating: TiAlN • Single or Double End: Single • Center Cutting: Yes • Overall Length... more

GS Tooling 102820 9/16 Diameter x 9/16 Shank 2-Flute Regular Length Yellow Series Carbide End Mill

• Mill Diameter (Inch): 9/16 • Number of Flutes: 2 • Material: Solid Carbide • Length of Cut (Inch): 1-1/8 • Shank Diameter (Inch): 9/16 • Finish/Coating: TiAlN • Single or Double End: Single • Center Cutting: Yes • Overall Length... more

30mm Cutting Depth 4 Flutes HSS Spiral End Mill Cutter Tool 9.5mm x 9.5mm

4 flutes coarse teeth straight shank deep helical groove. Comes with a blue plastic case it can hold the mill cutter well avoid accidental . Used widely in the milling machines or machine tools for milling the steps recesses vertical plane surfaces etc. more

HSS-AL 4 Flute Straight End Mill Cutter CNC Router Bit 6 x 6 x 13mm

1.Suitable for side milling end milling finish machining etc. Apply to carbon steel soft alloy steel die steel tool steel cast iron titanium aluminum etc. 2.With high bending resistance and abrasion resistance exclusive to HIGH HARDNESS HIGH SPEED... more

HSS-AL 2 Flute Straight Shank End Mill Cutter CNC Router Bit 6 x 6 x 13mm

1.Suitable for side milling end milling finish machining etc. Apply to carbon steel soft alloy steel die steel tool steel cast iron titanium aluminum etc. 2.With high bending resistance and abrasion resistance exclusive to HIGH HARDNESS HIGH SPEED... more

10PCS HSS-AL 3 Flute Straight End Mill Cutter CNC Router Bit 6 x 6 x 13mm

1.Suitable for side milling end milling finish machining etc. Apply to carbon steel soft alloy steel die steel tool steel cast iron titanium aluminum etc. 2.With high bending resistance and abrasion resistance exclusive to HIGH HARDNESS HIGH SPEED... more

Hertel 2 Diam Fine Pitch 6 LOC 8 Flute Cobalt Roughing Square End Mill Uncoated 9-3/4 OAL 2 Shank Diam Single End 30° Helix

Hertel 2 Diam Fine Pitch 6 LOC 8 Flute Cobalt Roughing Square End Mill Uncoated 9-3/4 OAL 2 Shank Diam Single End 30° Helix more

PET-U 3/16 Inch Carbide End Mill 3/16 Shank Diameter x 9/16 Cut Length x 2 Overall Length for Aluminum Cutting Non Ferrous Metal Up Cutting 3 Pcs

3/16 Inch Carbide End Mill 3/16 Shank Diameter x 9/16 Cut Length x 2 Overall Length for Aluminum Cutting Non Ferrous Metal Up Cutting 3 Pcs Feature: Made of high-quality materials sturdy and durable For Aluminum Cutting Non Ferrous Metal Up Cutting... more

Uxcell 2mm x 4mm 6.6 Degree Angle TiSiN Coated Carbide 2 Flutes Tapered Ball Nose End Mill

Made of 0.6um micro-grain tungsten carbide the end mill has higher hardness (HRC93) and strength better wear resistance and heat resistance. Carbide material with good milling and cutting performance ensures high work efficiency. Carbide can run at... more

3/8 4 Extra Long Length Carbide END Mill 3/8 X 3/8 X 3 X 6

Thank you for your custom.Customer care is our top priority. Offer is subject to availability.We promise you won t regret buying it. Carbide 3/8 Cutting Diameter 3/8 Shank Diameter 6 Overall Length 4 Flute more

Unique Bargains HSS-AL 6 Flute T Slot End Mill Milling Cutter 20mm x 3mm x 12mm x 90mm

Straight shank 6 flutes T shaped slot HSS-AL material.Used widely for milling steel aluminum copper and iron. more

waltyotur Carbide End Mill 3/16 Diameter x 9/16 Cutting Length x 2 Overall Length 5 Pieces

Carbide End Mill 3/16 Diameter x 9/16 Cutting Length x 2 Overall Length 5 Pieces Feature: Made of high quality materials durable High helix design allows for better finishing Helps with easy chip evacuation Suitable for alloy/hardened steel... more

FENGDovetail Groove Milling Cutter 60° 6 Flute Cutting 40mm Cutting Diameter Carbide Dovetail Cutters End Mill Straight Shank Mill Cutter-240521

Specification: Item Type:Milling Cutter Material: Carbide Cemented Chamfer Angle: 60° Cutting Diameter: 40mm Effective Cutting Flute Quantity: 6 Full Length: 102mm / 4.02in Blade Diameter: 40mm / 1.57in Handle Diameter: 20mm / 0.79in Package List: 1 x... more

5pcs High Speed Steel Spiral Router Bits Milling Cutter CNC End Mill Set 6 X 25 X 50mm

Condition: 100% Brand New Item Type: Spiral Milling Cutter Material: High Speed Steel Coating: Titanium Plating Diameter: Approx. 6mm / 0.2in Shank Diameter: Approx. 6mm / 0.2in Blade Length: Approx. 25mm / 1in Total Length: Approx. 50mm / 2in... more

5pcs High Speed Steel Spiral Router Bits Milling Cutter CNC End Mill Set 6 X 25 X 50mm

Condition: 100% Brand New Item Type: Spiral Milling Cutter Material: High Speed Steel Coating: Titanium Plating Diameter: Approx. 6mm / 0.2in Shank Diameter: Approx. 6mm / 0.2in Blade Length: Approx. 25mm / 1in Total Length: Approx. 50mm / 2in... more

HSS-AL 2 Flute Straight End Mill Cutter CNC Router Bit 2 x 6 x 7mm

1.Suitable for side milling end milling finish machining etc. Apply to carbon steel soft alloy steel die steel tool steel cast iron titanium aluminum etc. 2.With high bending resistance and abrasion resistance exclusive to HIGH HARDNESS HIGH SPEED... more

5pcs Spiral Router Bit High Speed Steel Milling Cutter CNC End Mill Set 6 X 32 X 60mm

5pcs Spiral Router Bit High Speed Steel Milling Cutter CNC End Mill Set 6 X 32 X 60mm Condition: 100% Brand NewItem Type: Spiral Milling CutterMaterial: High Speed SteelCoating: Titanium PlatingDiameter: Approx. 6mm / 0.2inShank Diameter: Approx. 6mm /... more

5pcs Professional CNC End Mill Metal Spiral Router Bit Milling Cutter Accessory 6 X 28 X 55mm

5pcs Professional CNC End Mill Metal Spiral Router Bit Milling Cutter Accessory 6 X 28 X 55mm Condition: 100% Brand New Item Type: Spiral Milling Cutter Material: High Speed Steel Coating: Titanium Plating Diameter: Approx. 6mm / 0.2in Shank Diameter:... more

5pcs Professional CNC End Mill Metal Spiral Router Bit Milling Cutter Accessory 6 X 28 X 55mm

Condition: 100% Brand New Item Type: Spiral Milling Cutter Material: High Speed Steel Coating: Titanium Plating Diameter: Approx. 6mm / 0.2in Shank Diameter: Approx. 6mm / 0.2in Blade Length: Approx. 28mm / 1.1in Total Length: Approx. 55mm / 2.2in... more