Power Tools › Irwin › astroid 19 1 4 high

IRWIN 44801 Adjustable Spade Bit

Adjustable Spade Drill Bit, 1 3/4 in Drill Bit Size, Straight, High Speed Steel, Shank Diameter 1/4 in, Overall Length 5 1/2 in, Bright (Uncoated), Maximum Drilling Depth 4 in more

Irwin 3/4 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3/4 inch Irwin 12 inch straight with 1/2 inch shank carbide tipped masonry drill bit carbide tipped for maximum wear resistance and capacity to withstand high impact patented flute geometry for faster chip removal 12 inch length for deep drilling... more

Irwin POWER-GRIP 1/2 in. High Carbon Steel Double-Ended Screw Extractor Set 4 in. 7 pc

The Irwin Tools Hanson 394100 Power-Grip Bit Set i more

Irwin Turbomax 21/64 in. X 4-5/8 in. L High Speed Steel Drill Bit 1 pc

IRWIN Turbomax High Speed Steel Straight Shank Jobber Length Drill Bits features revolutionary tip design stays sharper longer and drills up to 10x faster than other leading drill bits more

Irwin Tools 10231 Unibit 13-Hole High Speed Step Drill 1/8 To 1/2 Each

Irwin 10231 Unibit #1 13-Step 1/4-Inch Step Drill Bit 1/32-inch Steps (1/8- to 1/2- inches) Save time by eliminating the need to change drills when drilling round holes in thin materials. Each smaller size drill also acts as a pilot for the next size.... more

IRWIN UNIBIT 1 Step Drill Bit, 13 Hole Sizes, 1/8 in to 1/2 in, 1/32 in Step

Step Drill Bit, High Speed Steel, Black Oxide, 1/8 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 3/16 in Overall Length, Maximum Drilling Depth 1/8 in more

Irwin Tools UniBit 3/16-Inch to 1/2-Inch Step-Drill Bit 1/4-Inch Shank 10232

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

IRWIN UNIBIT 2 Step Drill Bit, 6 Hole Sizes, 3/16 in to 1/2 in, 1/16 Step

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 1/4 in Overall Length, Maximum Drilling Depth 5/16 in more

Hanson HSDR12A/CD 1/4

Features and Benefits: Ideal for drilling in hard-to-reach areas and for running wires and cable Bit is constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance For general use in wood metal and... more

Irwin Tools 43906 3/8 Plug Cutter

3/8 Diameter 1/4 Shank Size Plug Cutter Recommended For Covering Fastener Holes In Furniture Cabinetry Floors Decks & Other Woodworking Projects Constructed Of Hardened High Carbon Steel For Added Strength & Durability Ideal For Making Dowels Carded.... more

IRWIN INDUSTRIAL TOOL 12412 Countersink 5/8

High speed steel with black oxide coating for corrosion resistance. 5 flute design reduces vibration for smoother drilling. Precision-ground 82 deg Degree tip for countersinking into most Machin able metals. 1/4 Round shank compatible with all hand... more

IRWIN 25130 7-1/4" Circular Saw Blade,Steel,PK25

Circular Saw Blade, Blade Dia. 7 1/4 in, Diamond Knockout Yes, Number of Teeth 24, Tip Material Steel, Hook Angle 19 Degrees , Tooth Grind ATB, Blade Type Combination, Plate Thickness 0.055 in, Application For Framing/Ripping/Decks, Package Quantity 25 more

IRWIN UNIBIT 4 Unibit #4 Step Drill Bit, 12 Hole Sizes, 3/16 to 7/8 in, 1/16 in

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 7/8 in Size Range, Straight with Three Flats, 3/8 in Shank Diameter, 2 7/8 in Overall Length, Maximum Drilling Depth 1/8 in more

IRWIN 316015 15-pc. Jobber Length Drill Set, Cobalt Alloy Steel

Jobber Length Drill Set, Number of Drill Bits 15, 135 Degrees Drill Bit Point Angle, Drill Bit Point Type Conventional Point, High Speed Steel, Black Oxide, Drill Bit Sizes Included 1/16 in, 1/4 in, 1/8 in, 3/16 in, 3/32 in, 3/8 in, 5/16 in, 5/32 in,... more

Irwin 1/4 in. Dia. High Speed Steel Wood Countersink 1/4 in. Round Shank 1 pc.

IRWIN Wood Countersinks feature a tapered drill and wide flutes that drill fast clean pilot holes and ensure a tight fit for screws. They have an adjustable four cutter counter bore attachment that cuts fast and clears chips quickly for fast smooth... more

2Pc Irwin 1-1/8 in. X 2-1/4 in. L High Speed Steel Wire Gauge Bit 1 pc

The Irwin tools for basic drilling applications in more

2Pc Irwin 9/32 in. X 4-1/4 in. L High Speed Steel Drill Bit 1 pc

Titan Drill Bit 9/32 inch Titanium Jobber Length more

IRWIN 15103 HSS Step Drill Bit 9 Sizes, 1/4-3/4", Shank Type: Hex

Step Drill Bit, High Speed Steel, TiN, 1/4 in to 3/4 in Size Range, Straight with Three Flats, 3/8 in Shank Diameter, 2 1/2 in Overall Length, Maximum Drilling Depth 1/8 in more

IRWIN 10225 Step Drill Bit Set,HSS,1/8-1-3/8 In,4 pc

Step Drill Bit Set, High Speed Steel, Black Oxide, 1/8 in to 1/2 in, 13/16 in to 1 3/8 in, 3/16 in to 1/2 in, 3/16 in to 7/8 in Size Range, Straight with Three Flats, Number of Drill Bits 3, Shank Hex Size 1/4 in, 3/8 in, 7/16 in more

IRWIN 15502 HSS Step Drill Bit Set 1/8-3/4", 3 pc.

Step Drill Bit Set, High Speed Steel, TiN, 1/4 in to 3/4 in, 1/8 in to 1/2 in, 3/16 in to 1/2 in Size Range, Straight with Three Flats, Number of Drill Bits 3, Shank Hex Size 1/4 in more

Irwin 1/4 in. X 4 in. L High Speed Steel Left Hand Drill Bit 1 pc

Bit is constructed of high speed steel for the best combination of strength heat resistance and wear resistance. more

2Pc Irwin Turbomax 9/32 in. X 4-1/4 in. L High Speed Steel Drill Bit 1 pc

IRWIN Turbomax High Speed Steel Straight Shank Jobber Length Drill Bits features revolutionary tip design stays sharper longer and drills up to 10x faster than other leading drill bits more

Irwin Hanson 90180 1-1/4 in. Silver & Deming High Speed Steel Fractional 1/2 in. Reduced Shank Drill Bit

1-1/4 High Speed Steel Sae 1/2 Shank Drill Bit more

2Pc Irwin 2-1/8 in. X 3-1/4 in. L High Speed Steel Wire Gauge Bit 1 pc

The Irwin tools for basic drilling applications in more

5Pc Irwin 2-1/8 in. X 3-1/4 in. L High Speed Steel Wire Gauge Bit 1 pc

The Irwin tools for basic drilling applications in more

2Pc Irwin 11/32 in. X 4-3/4 in. L High Speed Steel Drill Bit 1 pc

Irwin Industrial Bit is constructed with a strong more

Irwin 63916 1/4 Inch By 4 Inch Titanium High Speed Bit

Key Features Titanium Nitride (TiN) coating resists heat and friction providing up to 6X longer life than standard high-speed steel bits Heavy-duty web design provides extreme rigidity when drilling in metal applications Shorter cutting lips reduce... more

Irwin 11/32 in. X 4-3/4 in. L High Speed Steel Drill Bit 1 pc

Bit is constructed of M-2 high speed steel for the more

Irwin 9 Hole Sizes 1/4 to 3/4 Hole Diam High Speed Steel Speedpoint Step Drill Bit

Irwin 9 Hole Sizes 1/4 to 3/4 Hole Diam High Speed Steel Speedpoint Step Drill Bit 1/8 Step Length 3/8 Hex Shank Bright Finish more

Irwin 7/32 in. Dia. High Speed Steel Countersink 1/4 in. Quick-Change Hex Shank 1 pc.

Tapered drill bits with widened flutes for drilling fast clean pilot holes. Adjustable 4-cutter counterbore cuts and clears chips quicker for fast smooth countersink or counterbore drilling. Attaches and adjusts with 2 Hex screws. Counterbore attaches... more

Irwin 3/4 in. Dia. x 6 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3/4 inch Irwin Straight Shank Carbide Tipped Masonry Drill Bit 6 inch overall length carbide tipped for maximum wear resistance and capacity to withstand high impact patented flute geometry for faster chip removal for use with rotary and percussion... more

Irwin Silver And Deming High Speed Steel Fractional 1/2 Inches Reduced Shank Drill Bit 3/4 In - 1 per BIT - 91148

Bit is constructed of M-7 high speed steel for high resistance to abrasion during tough drilling applications. 1 per BIT Three-flatted shank design provides better chuck grip and reduces slippage. Ideal for use in keyless chucks. All Silver & Deming... more

Irwin Unibit 1/4 to 1-3/8 in. Dia. x 6 in. L High Speed Steel Step Drill Bit 7/16 in. Hex Shank

The Irwin unibit high-speed steel fractional self-starting step drill 5 1/4 inch - 1-3/8 inch is ideal for drilling clean smooth holes in mild steel copper bass aluminum plexiglass wood and laminate. Crafted of high-speed steel it has a speed point tip... more

5Pc Irwin 1-5/8 in. X 2-3/4 in. L High Speed Steel Wire Gauge Bit 1 pc

The Irwin tools for basic drilling applications in more

Irwin Turbomax 17/64 in. X 4-1/8 in. L High Speed Steel Drill Bit 1 pc

IRWIN Turbomax High Speed Steel Straight Shank Jobber Length Drill Bits features revolutionary tip design stays sharper longer and drills up to 10x faster than other leading drill bits more

Irwin 3/8 in. Dia. High Speed Steel Countersink 1/4 in. Round Shank 1 pc.

* * IRWIN High Speed Steel Countersinks feature a precision-ground 82-degree tip that makes them ideal for countersinking into most machinable metals. They re made from industrial grade high speed steel for increased durability and they include a black... more

Irwin 9/64 in. Dia. High Speed Steel Countersink 1/4 in. Quick-Change Hex Shank 1 pc.

Irwin Wood Countersinks feature a tapered drill and wide flutes that drill fast clean pilot holes and ensure a tight fit for screws. They have an adjustable four-cutter counter bore attachment that cuts fast and clears chips quickly for fast smooth... more

Irwin 1/4 in. Dia. High Speed Steel Countersink 1 pc.

IRWIN® Metal Countersinks is made from industrial grade high speed steel for increased durability more