Power Tools › 2pcs 6 5mm dia white

5mm Dia 5mm Straight Shank HRC45 Carbide AlTiN Coated 4 Flute Square End Mill 2pcs

The milling cutter is made of tungsten steel (carbide) which has a series of excellent properties such as high hardness wear resistance good strength and toughness heat resistance and corrosion resistance. These properties extend tool life and keep end... more

SCOTCH-BRITE 07502 Adhesive/Stripe Removal Disc,6 In Dia

Adhesive and Stripe Removal Disc, Product Type Disc, Backing Pad Type Not Applicable, Attachment Not Applicable, Color White, Material Silicon Carbide, Maximum Speed 2,800 RPM, Texture Not Applicable, Thickness Not Applicable, Outside Diameter 6 in,... more

6542 High Speed Steel Twist Drill Bit, 5mm Drill Dia. 160mm Length 2Pcs - Silver Tone

Specifications: Twist Drill Bits Diameter: 5mm / 0.2-inch; Drill Bit Length:100mm / 3.94-inch; Shank Diameter: 5mm / 0.2-inch; Total Length: 160mm / 6.3-inch; 2 x Straight Shank Twist Drill Bit [Strength and Hardness]- Made of 6542 HSS (High Speed Steel)… more

6542 High Speed Steel Twist Drill Bit, 5mm Drill Dia. 160mm Length 2Pcs - Silver Tone

Specifications: Twist Drill Bits Diameter: 5mm / 0.2-inch; Drill Bit Length:100mm / 3.94-inch; Shank Diameter: 5mm / 0.2-inch; Total Length: 160mm / 6.3-inch; 2 x Straight Shank Twist Drill Bit [Strength and Hardness]- Made of 6542 HSS (High Speed Steel)… more

High Speed Steel Extended Twist Drill Bits 1.5mm Drill Dia. 160mm Length 6 Pcs

[Specifications]- Twist Drill Bits Diameter: 1.5mm / 0.06-inch; Drill Bit Length:100mm / 3.94-inch; Shank Diameter: 1.5mm / 0.06-inch; Total Length: 160mm / 6.3-inch; 6 x Straight Shank Twist Drill Bit [Strength and Hardness]- Made of high-speed steel. more

2pcs Set 2gt Aluminum Timing Pulley 20&36 Teeth 5mm Bore Synchronous Wheel With 2pcs Length 200mm Width 6mm Belt (20-36t-5b-6)

Faster shipping. Better service more

CONTINENTAL 32W234 1/2" ID x 50 ft EPDM Coupled Food Hose WT

Washdown Hose, Hose Inside Dia. 1/2 in, Hose Length 50 ft, Hose Color White, Hose Tube Material EPDM, Hose Cover Material EPDM, Max. Working Pressure @ 70 F 300 psi, Temp. Range -40 Degrees to 200 Degrees F, Safety Factor 4:1, Bend Radius 6 in, Hose... more

5mm Dia 5mm Straight Shank HRC45 Carbide AlTiN Coated 2 Flute Square End Mill 2pcs

The milling cutter is made of tungsten steel (carbide) which has a series of excellent properties such as high hardness wear resistance good strength and toughness heat resistance and corrosion resistance. These properties extend tool life and keep end... more

5mm Dia 5mm Straight Shank HRC55 Carbide AlTiN Coated 4 Flute Square End Mill 2pcs

The milling cutter is made of tungsten steel (carbide) which has a series of excellent properties such as high hardness wear resistance good strength and toughness heat resistance and corrosion resistance. These properties extend tool life and keep end... more

5mm Dia 200mm Length HSS Round Shaft Rod Bar Lathe Milling Tools Gray 2pcs

Features: 5mm diameter 200mm long?round stock?lathe tools?HSS?rods. This product is not yet heat treated �C so it can still be sawed turned drilled milled filed etc. Used for turning boring graving etc.? more

1.5mm Cutting Dia 6mm Straight Shank 4 Flute HSSAL End Mill Cutter CNC Bit 2Pcs

Feature with straight shank helical groove 4 flutes 1.5mm cutting diameter 6mm shank diameter HSSAL material. Fine pitch precise tool for rough milling used to drill into work piece for slotting. Used widely for machining of carbon steel cast iron non... more

10.5mm Dia HSS Cobalt Straight Shank Metric Twist Drill Bit Drilling Tool 2pcs

This product is made of?high?speed steel and cobalt material. After using full grinding ?process it has stronger cutting ability and longer service life. Suitable for processing non-ferrous metals (such as copper and aluminum) non metallic and ferrous... more

2.5mm Dia 4mm Straight Shank HRC55 Carbide AlTiN Coated 2 Flute Square End Mill 2pcs

The milling cutter is made of tungsten steel (carbide) which has a series of excellent properties such as high hardness wear resistance good strength and toughness heat resistance and corrosion resistance. These properties extend tool life and keep end... more

2.5mm Dia 200mm Long HSS Straight Round Shank Twist Drill Bit Drilling Tool 2pcs

This product is made of?high?speed steel. Twist drill bit with round shank sharp spiral groove. Suitable for processing non-ferrous metals (such as copper and aluminum). The twist drill bit is used with electrical drilling machine.(here is not included) more

Uxcell Round Solid Aluminum Rod 5mm Dia.200mm Length Lathe Bar Stock for DIY Craft 2pcs

What is this? Aluminum rods Widely used in Gear shaft motor shaft short support shaft miniature axle for shaft pocket model model plane or model ship ect. Is there any advantages of the product? Rod made with 6061 aluminum it has high strength good... more

2pcs 11.5mm Cutting Dia Round Shank High-Speed Steel Cobalt Metric Twist Drill Bit Rotary Tool

Description: This product is made of high-speed steel and cobalt material. After using a full grinding process it has stronger cutting ability and a longer service life. Suitable for processing non-ferrous metals such as copper and aluminum and... more

2.5mm Cutting Dia 6mm Straight Shank 4 Flute HSS End Mill Cutter CNC Bit 2pcs

Feature with straight shank ?helical groove 4 flutes 2.5mm cutting diameter 6mm shank diameter ?HSS material. Fine pitch precise tool for rough milling used to drill into work piece for slotting. Used widely for machining of carbon steel cast iron non... more

Uxcell 5mm Depth 20mm Cutting Dia 12mm Shank Carbide Tip 6 Flutes T-Slot Milling Cutter

Tungsten carbide tip has good toughness high hardness wear resistance and heat resistance. It has good cutting strength and offers faster cutting speeds than other substrates. Suitable for machining T slotting straight slotting side grooving and... more

Uxcell 5mm Depth 30mm Cutting Dia 16mm Shank Carbide Tip 6 Flutes T-Slot Milling Cutter

Tungsten carbide tip has good toughness high hardness wear resistance and heat resistance. It has good cutting strength and offers faster cutting speeds than other substrates. Suitable for machining T slotting straight slotting side grooving and... more

Uxcell High Speed Steel Straight Shank Parabolic Flute Drill Bit 6.5mm Dia. 148mm Length

High Speed Steel Straight Shank Parabolic Flute Drill Bit 6.5mm Dia. 148mm Length The product is made of high-speed steel. Smooth surface finish long service life. Suitable for wood malleable iron aluminum plastic etc. Great replacement for your dull... more

Uxcell 5mm Depth 25mm Cutting Dia 12mm Shank Carbide Tip 6 Flutes T-Slot Milling Cutter

Tungsten carbide tip has good toughness high hardness wear resistance and heat resistance. It has good cutting strength and offers faster cutting speeds than other substrates. Suitable for machining T slotting straight slotting side grooving and... more

Uxcell 8mm Diamond Grit Hole Saw Drill Bit 6.5mm Shank Dia 10 Pack for Tile Glass

Description: 1. Designed for drilling 8mm diameter holes. 2. Nickel-plated hole saw drill bit with a diamond dust coating offers superior performance and cutting strength. 3. Cut clean and round holes to a depth of approximately 30mm. 4. Excellent for... more

Uxcell 6-Inch Lengthen Twist Drill Bit Set High-Speed Steel 2mm - 5mm Drilling Dia 150mm Total Length

Uxcell 6-Inch Lengthen Twist Drill Bit Set High-Speed Steel 2mm - 5mm Drilling Dia 150mm Total Length This product is made of high-speed steel small drilling resistance chip removal smoothly. Smooth surface finish long service life. Suitable for wood... more

Uxcell M35 High Speed Steel Parabolic Flute Drill Bit 6.5mm Drilling Dia. 200mm Length Gold Oxide Cobalt Steel

Uxcell M35 High Speed Steel Parabolic Flute Drill Bit 6.5mm Drilling Dia. 200mm Length Gold Oxide Cobalt Steel 1. Made of M35 HSS(High Speed Steel) cobalt steel. With high hardness and red hardness wear-resistant and fast drilling performance. 2. The... more

Uxcell 6542 High Speed Steel Twist Drill Bit Fully Ground Black Oxide 6.5mm Drill Dia 100mm Total Length 4Pack

Uxcell 6542 High Speed Steel Twist Drill Bit Fully Ground Black Oxide 6.5mm Drill Dia 100mm Total Length 4Pack 1. Made of high-speed steel with great toughness and hardness not easy to break easy chip removal the drill quenching treatment improve the... more

6.5mm Drilling Dia 250mm Length HSS Straight Round Shank Twist Drill Bit Black

High speed steel tool is good for most general purpose applications offering a combination of hardness and toughness for wear resistance. Straight and round shank allows use with a wide variety of toolholding systems. Used widely to drill the metal and... more

Unique Bargains 6.35mm Dia Hex Shank Magnetic PH1 Phillips 3.5mm Cross Head Bits Tool x 10

Designed for use in hand-driving applications or with power tools when used with the Insert Bit Holder. Magnetic so that the PH1 Screwdriver Bits are easy and convenient to use. more

2pcs 6.1mm Cutting Dia Round Shank High-Speed Steel Cobalt Metric Twist Drill Bit Rotary Tool

Description: This product is made of high-speed steel and cobalt material. After using a full grinding process it has stronger cutting ability and a longer service life. Suitable for processing non-ferrous metals such as copper and aluminum and... more

6.7mm Drilling Dia Straight Shank HSS Cobalt Metric Twist Drill Bit 2pcs

This product is made of?high?speed steel and cobalt material. After using full grinding ?process it has stronger cutting ability and longer service life. Suitable for processing non-ferrous metals (such as copper and aluminum) non metallic and ferrous... more

6.3mm Drilling Dia Straight Shank HSS Cobalt Metric Twist Drill Bit 2pcs

This product is made of?high?speed steel and cobalt material. After using full grinding ?process it has stronger cutting ability and longer service life. Suitable for processing non-ferrous metals (such as copper and aluminum) non metallic and ferrous... more

6.1mm Drilling Dia Round Shank Cobalt Metric Twist Drill Bit Rotary Tool 2pcs

This product is made of?high?speed steel and cobalt material. After using full grinding ?process it has stronger cutting ability and longer service life. Suitable for processing non-ferrous metals (such as copper and aluminum) non metallic and ferrous... more

Uxcell 2pcs 6.7mm Drilling Dia Straight Shank High-Speed Steel Metric Twist Drill Bit Tool

Description: This product is made of high-speed steel and cobalt material. After using full grinding process it has a stronger cutting ability and a longer service life. Suitable for processing non-ferrous metals (such as copper and aluminum) and... more

2pcs 6.3mm Dia. High Speed Steel Straight Shank Twist Drill Bits Hand Tools for Car

2pcs 6.3mm Dia. High Speed Steel Straight Shank Twist Drill Bits Hand Tools for Car Description: Twist drill bit with straight shank sharp spiral groove. Used widely to drill the metal high-carbon steel stainless steel is easy to install. Sharp and... more

Router Bit 1/4 Shank 3/8 Dia Flush Trim w Bearing 2 Flute Carbide 2pcs

Specification: Product Name: Flush Trim Bit Material: Carbide Net Weight: 69g Standard: 1/4x3/8 inch Shank Diameter: 6.35mm/ 0.25 inch Cutting Diameter: 9.5mm/ 0.38 inch Cutting Depth: 32mm/ 1.26 inch Total Length: 74mm/ 2.91 inch Features: Flush trim... more

Unique Bargains Router Bit 1/4 Shank 3/8 Cutting Dia 26mm Depth Flush Trim Bit w Bearing 2 Flutes Milling Cutter 2pcs

Specifications: Product Name: Flush Trim Bit Material: Carbide Net Weight: 44g Standard: 1/4 x 3/8 inch Shank Diameter: 6.3mm/ 1/4 inch Cutting Diameter: 9.5mm/ 3/8 inch Cutting Depth: 20mm/ 0.79 inch Total Length: 60mm/ 2.36 inch Feature: Router bits... more

Router Bit 1/4 Shank 1/4 Dia Flush Trim Bearing 2 Flute Carbide DIY 2pcs

Specification: Product Name: Flush Trim Bit Material: Carbide Net Weight: 61g Standard: 1/4x1/4 inch Shank Diameter: 6.35mm/ 0.25 inch Cutting Diameter: 6.35mm/ 0.25 inch Cutting Depth: 32mm/ 1.26 inch Total Length: 77mm/ 3 inch Features: Flush trim... more

Router Bit 1/4 Shank 3/8 Cutting Dia 2 Straight Flute HSS Milling DIY 2pcs

Specification: Product Name: Straight Router Bit Material: HSS(high speed steel) Net Weight: 40g Standard: 1/4 x 3/8 inch Shank Diameter: 6.35mm/ 0.25 inch Cutting Diameter: 9.6mm/ 0.38 inch Cutting Depth: 26mm/ 1 inch Total Length: 58mm/ 2.3 inch... more

2pcs Router Bit 1/4 Shank 3/4 Cutting Dia Round Corner Tungsten

Specification: Material: Tungsten Steel Shank Diameter: 1/4 inch (6.35mm) Edge Diameter: 3/4 inch (19.05mm) Overall Diameter:1.22 inch (31mm) Total Length: 2.2 inch (55.88mm) Net Weight: 63g Feature: Round hardened shank gives extra strength and a... more