Micro 100 › petite lands end 1 4

Micro 100 Sq. End Mill Single End Carb 1/4 SEM-250-02

Square End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/2 in Overall Length 2 in Shank Dia. 1/4 in more

Micro 100 Ball End Mill Single End 1/4 Carbide BEM-250-04

Ball End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Non-Coolant Through more

Micro 100 Sq. End Mill Single End Carb 1/4 GEM-250-3

Square End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 SDH-250-03X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Ball End Mill Single End 1/4 Carbide BEF-250-750

Ball End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Non-Coolant Through more

Micro 100 Ball End Mill Single End 1.50mm Carbide BMRM-015-4

Ball End Mill 1.5 mm Milling Dia. Carbide Bright (Uncoated) Non-Coolant Through more

Micro 100 Sq. End Mill Single End Carb 1/4 SHL-250-4X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 1 1/8 in Overall Length 3 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 GEM-250-3X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1.00mm GEMM-010-4

Square End Mill 1.00 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3.00 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Sq. End Mill Single End Carb 1/4 SHR-250-4X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/2 GEM-500-4

Square End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1 in Overall Length 3 in Shank Dia. 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1/2 EMS-500-4

Square End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Length of Cut 1 in Overall Length 3 in Shank Dia. 1/2 in more

Micro 100 Ball End Mill Single End 1/4 Carbide BEF-250-1500K

Ball End Mill 1/4 in Milling Dia. Carbide nACRo Non-Coolant Through more

Micro 100 Sq. End Mill Single End Carb 1/4 SEM-250-03X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/2 in Overall Length 2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 GEM-250-4X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 EMS-250-4X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 GEM-250-2

Square End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 3/4 GEM-750-4

Square End Mill 3/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1 1/2 in Overall Length 4 in Shank Dia. 3/4 in more

Micro 100 Cor Rad End Mill 1/4 Carb 0.0200 rad GEC-250-4-020X

Corner Radius End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.02 in 3/4 in 2 1/2 in more

Micro 100 Cor Rad End Mill 1/4 Carb 0.0100 rad GEC-250-4-010

Corner Radius End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 3/4 in 2 1/2 in more

Micro 100 CR End Mill 0.090 CR 5/8 Dia 1-1/4 Cut ARC-625-3-090

Corner Radius End Mill 5/8 in Milling Dia. Bright (Uncoated) Fractional Inch 0.090 in 1 1/4 in 3 1/2 in more

Micro 100 Sq. End Mill Single End Carb 5/8 GEM-625-4

Square End Mill 5/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1 1/4 in Overall Length 3 1/2 in Shank Dia. 5/8 in more

Micro 100 Sq. End Mill Single End Carb 7/64 GEM-109-4

Square End Mill 7/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/8 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 5/8 EMS-625-4

Square End Mill 5/8 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Length of Cut 1 1/4 in Overall Length 3 1/2 in Shank Dia. 5/8 in more

Micro 100 Sq. End Mill Single End Carb 9/32 GEM-281-4

Square End Mill 9/32 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 5/16 in more

Micro 100 Sq. End Mill Single End Carb 3/8 EMS-375-4

Square End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Sq. End Mill Single End Carb 3/8 GEM-375-4

Square End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-4-020

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Corner Rounding End Mill 1/4 Cobalt CREM-060-080

Single End Corner Rounding End Mill 1.50 mm Number of Flutes 3 Carbide Bright (Uncoated) Straight more

MICRO 100 VLM-500-5K Square End Mill 1-3/4 Cut Length nACRo

Square End Mill 1/2 in Milling Dia. Carbide nACRo Weldon Flat Length of Cut 1 3/4 in Overall Length 4 1/2 in Shank Dia. 1/2 in Features Dimension Type: Fractional Inch Milling Diameter: 1/2 End Mill Material: Carbide Number of Flutes: 5 Length of Cut:... more

Micro 100 Cor Rad End Mill 1/16 Carb 0.0050 rad GEC-062-4-005X

Corner Radius End Mill 1/16 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.005 in 3/16 in 1 1/2 in more

Micro 100 CRE-250-090 Corner Rounding End Mill: 0.09 Radius 1/4 Diam 3 Flute

Micro 100 CRE-250-090 Corner Rounding End Mill: 0.09 Radius 1/4 Diam 3 Flutes Solid Carbide 1/4 Shank Dia Bright/Uncoated Double End Priced and sold as each (1). more

Micro 100 CRE-625-250 Corner Rounding End Mill: 1/4 Radius 5/8 Diam 3 Flutes

Micro 100 CRE-625-250 Corner Rounding End Mill: 1/4 Radius 5/8 Diam 3 Flutes Solid Carbide 5/8 Shank Dia Bright/Uncoated Double End Priced and sold as each (1). more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad GEC-125-4-010X

Corner Radius End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.01 in 1/2 in 1 1/2 in more

Micro 100 CRE-250-093 Corner Rounding End Mill: 0.0938 Radius 1/4 Diam 3 Flu

Micro 100 CRE-250-093 Corner Rounding End Mill: 0.0938 Radius 1/4 Diam 3 Flutes Solid Carbide 1/4 Shank Dia Bright/Uncoated Double End Priced and sold as each (1). more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0100 rad GEC-500-4-010

Corner Radius End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 1 in 3 in more

Micro 100 Cor. Rad. End Mill 1.50mm CR Carbide HMCM-2015-4

Corner Radius End Mill 20.000mm Milling Dia. Bright (Uncoated) Metric 1.50mm 38.00mm 125.0mm more

Micro 100 Sq. End Mill Single End Carb 1.50mm AEMM-015-2

Square End Mill 1.50 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 4.00 mm Overall Length 50.00 mm Shank Dia. 4.00 mm more