See Matches In
Narrow Search Results
Price Range
Brand
Stores
Best Seller | This Surface Slide Latch has an offset bar and is constructed of Chrome Plated Zamak. This replacement partition hardware is used to provide security and privacy in public restroom stalls. The mounting Hole Centers at at 2-3/4 inch. 5/16 inch slide bar... more | go to store |
This Surface Slide Latch has an offset bar and is constructed of Chrome Plated Zamak. This replacement partition hardware is used to provide security and privacy in public restroom stalls. The mounting Hole Centers at at 2-3/4 inch. 5/16 inch slide bar... more | go to store |
Has the seal on your sliding screen door ripped or deteriorated in the sun? This sliding screen door bug seal is 84 inches long with tear strips that adjust widths from 3/4 inch to 1-3/8 inch (best results if you use a straight edge and sharp knife to... more | go to store |
These wall brackets are constructed of zinc alloy (cast Zamak) and they come in a chrome plated finish. They feature a single ear that can be mounted to the left or right side of the panel, and they have a 2-1/2 in. overall reach, with a 2-11/16 in.... more | go to store |
This is an extruded aluminum sliding doorkeeper. It is surface mounted for hook-style latches. The dimensions are 2-1/2 in. in length, with a 1-1/2 in. width. It is used by Viking doors. | Prime-Line Extruded Aluminum Sliding Door Keeper for Hook Style... more | go to store |
This step drill is constructed of hardened steel and features two diameters in one, for specifically for use when installing aluminum screen plunger bolts. It is used to drill 2 different diameter holes in one single pass for installation of screen... more | go to store |
These rim cylinder locks are constructed of a heavy-duty zinc diecast housing and come in a brass plated finish with 5 pin tumblers. This item includes 2 keys, 1 cylinder, 1 trim ring and 1 mounting plate with 2 fasteners. NOTE: The keys are designed... more | go to store |
These rim cylinder locks are constructed of a heavy-duty zinc diecast housing and come in a brass plated finish with 5 pin tumblers. This item includes 2 keys, 1 cylinder, 1 trim ring and 1 mounting plate with 2 fasteners. NOTE: The keys are designed... more | go to store |
These rim cylinder locks are constructed of a heavy-duty zinc diecast housing and come in a brass plated finish with 5 pin tumblers. This item includes 2 keys, 1 cylinder, 1 trim ring and 1 mounting plate with 2 fasteners. NOTE: The keys are designed... more | go to store |
This two Ear bracket features a width of 4 in. designed for installations of 1-1/4 in. thick panels, These brackets are used to replace damaged, or missing installation wall brackets, and for new installations of restroom partition panels. This Bracket... more | go to store |
Features:For use on rolled edge metal tracks with a 3/32 in. x 1-3/16 inHelps to keep drawers alignedMounts to the back of the drawerPurple molded plasticIncludes 2 guides and 4 side saddlesMounting hardware includedA Phillips head screwdriver is... more | go to store |
Designed for use with a concealed latching mechanism, it has an offset bolt with a flat tip, and it assembles easily with a push nut fastener. This lever set has a 1-3/4 in. outside diameter, and it features an overall reach of 2-21/32 inches with a... more | go to store |
This is a plain back tandem roller assembly used by a variety of patio door manufacturers of metal or vinyl framed patio doors. It has two in-line 1-1/4 in. concave Plastic ball bearing rollers set in a stamped steel housing with rear adjustment. The... more | go to store |
This is a dual horizontal nylon roller guide used on Peachtree Carvel patio doors. The square bracket design straddles the wood frame with the two 1-5/16 in. nylon rollers sitting askew from each other and providing a smooth operation along both sides... more | go to store |
These window grid retainer pins are constructed of plastic bodies with steel needle point pins and they come clear in color. They feature a 5/8 inch long plastic shafts and 1/2 inch long plastic retainer sleeves, ideal for mounting mullion grids over... more | go to store |
This is an F-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall with a 13/16 in. flare. It is rear adjusting with a 1/4-20 threaded mounting hole on... more | go to store |
These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... more | go to store |
This is a Truth Hardware low-profile casement window sash lock that offers a low profile design. It only requires a 5/8 in. stop thickness, and comes in a white painted diecast zinc construction. The mounting holes are 2 in. on center. When the lever... more | go to store |
This solid brass housing with plastic lenses. Fits wood or metal doors 1-3/8 in. to 2-1/8 in. thick. Easy to install viewer. 9/16 in. bore diameter. UL listed | Prime-Line 9/16 in. 200 Degree Satin Chrome Door Viewer (Single Pack) in Gray | 6.125 H x 4... more | go to store |
This is a plain back, patio door roller assembly with a 1-1/2 in. concave, or grooved, steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 13/16 in. dimple width, and 1-5/8 in. tall. It is rear adjusting with a 1/4-20... more | go to store |
Prime-Line Screen Corner in Brown | 6.35 H x 7.45 W x 2 D in | Wayfair PL 15756 This is a 3/4 in. x 7/16 in. screen corner for Andersen window screens. They are designed to be only used with Andersen screen frames. The item is primarily a replacement for broken or cracked corners but can be used to fabricate new screens if the... more | go to store |
Prime-Line Pulley w/ Strap & Axle Bolt, Steel in Gray | 9.6 H x 3.75 W x 2 D in | Wayfair GD 52130 This is a 4 in. heavy-duty galvanized steel pulley, with galvanized steel strap. Made of case hardened steel race with steel ball bearings. Comes factory lubricated and can be used at stationary or spring pulley positions. This pulley is designed to... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... more | go to store |
This is an adjustable top hung, side mounted bracket with a 1/16 inch offset and 7/8 inch flat nylon roller used on the back of a sliding door panel. It fits 3/4 inch to 1-3/8 inch thick doors. Used by a variety of sliding closet or wardrobe doors. |... more | go to store |
This pilaster (post) anchoring kit is designed for use with posts 3/4 in. thick and larger. The kit includes a 5/16-18 x 3 in. hex head bolt, four L-brackets, two plastic wall anchors, six 1-3/4 in. pan head fasteners, and four 5/8 in. pan head... more | go to store |
Includes a total of two (2) two-ear wall brackets, and four (4) alcove brackets, together with all the fasteners necessary for their complete installation. All brackets in this kit are designed for use with 1-inch thick restroom partition panels.... more | FREE shipping go to store |
This kit includes two drawer track guides constructed of white plastic, and they are used to replace damaged or missing drawer guides that have a 25/32 in. wide x 5/16 in. tall opening. These guides are designed to fit 3/4 in. x 9/32 in. tracks to... more | go to store |
This is a sliding patio door wood pull is designed to fit most flush lock systems. It features 2 mounting brackets that are crafted from metal for longevity and plated in chrome. The handle has a 6-5/8 in. mounting hole center. Minimum door width of... more | go to store |
These window grid retainers are constructed from clear plastic and include 6 per sealed package. They feature a 13/16 inch opening, 1/2 inch depth, and 5/16 inch height that secure your window mullion grids to the pre-drilled holes in the window... more | go to store |
Prime-Line Keyed T-Handle in Gray | 7.55 H x 3.8 W x 0.9 D in | Wayfair GD 52109 This T-locking handle is constructed from zinc diecast and comes in a chrome plated finish. It features a 5/16 in. x 5-4/8 in. square shaft with an overall length of 6-3/8 in. from top of handle to end of shaft. The mounting hole are 1-1/2 in. on... more | go to store |
This 13/16 in. nylon constructed roller is used for monorail drawer track systems. Easily mounts to the right side of your drawer when viewed from the rear. Includes 2 rollers with necessary mounting screws. Size: 6.4' H x 3.75' W | Prime-Line Drawer... more | go to store |
This 13/16 in. nylon constructed roller is used for monorail drawer track systems. Easily mounts to the right side of your drawer when viewed from the rear. Includes 2 rollers with necessary mounting screws. Size: 6.4' H x 3.75' W | Prime-Line Drawer... more | go to store |
This white diecast outside handle can replace a multiple outside handles. It will fit most applications that require any of the following mounting holes of 3 in. 3-1/2 in. 3-15/16 in. 4-15/16 in. 5-5/8 in. or 6-7/8 in. on center. It can be keyed with... more | go to store |
Ads related to oxingo 4 bulb 6 2