Micro 100 › nyack 18 1 2 high

Micro 100 Cor Rad End Mill 1/2 Carb 1/8 rad VHSM-060-5K

Corner Radius End Mill 6.00 mm Milling Dia. Carbide nACRo Weldon Flat Metric 0.50mm 10.00 mm 57.00 mm more

Micro 100 Sq. End Mill Single End Carb 1/8 GEM-125-2

Square End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/2 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 1/8 EMS-125-2

Square End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/2 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Micro Drill 1/8 Carbide DR-125-2

Micro Drill Bit Drill Bit Size 1/8 in Drill Bit Point Angle 118 Degrees Conventional Point Carbide Bright (Uncoated) +0.0000 in /-0.0005 in Spiral C2 more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-2-020X

Corner Radius End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad GEC-125-4-010X

Corner Radius End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.01 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-3-020X

Corner Radius End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-3-020

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad VHM-125-4X

Corner Radius End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.01 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-4-020

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1/8 GEM-125-4X

Square End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/2 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 1/8 EMS-125-3X

Square End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/2 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 1/8 GEM-125-3

Square End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/2 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Cut Off Blade 1/8 Carbide Tip T-105-V

Cut Off Blade High Speed Steel Cutter Material Carbide Tipped Overall Length 5 in Zinc Parallel more

Micro 100 Cut Off Blade 1/8 Carbide Tip T-105

Cut Off Blade High Speed Steel Cutter Material Carbide Tipped Overall Length 5 in Zinc Parallel more

Micro 100 Cut Off Blade 1/8 Carbide Tip T-111

Cut Off Blade High Speed Steel Cutter Material Carbide Tipped Overall Length 6 in Zinc Parallel more

Micro 100 Cut Off Blade 1/8 Carbide Tip T-108

Cut Off Blade High Speed Steel Cutter Material Carbide Tipped Overall Length 5 in Zinc Parallel more

Micro 100 Cut Off Blade 1/8 Carbide Tip T-108-V

Cut Off Blade High Speed Steel Cutter Material Carbide Tipped Overall Length 5 in Zinc Parallel more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0050 rad MEF-125-1000-005K

Corner Radius End Mill 1/8 in Milling Dia. Carbide nACRo Straight Fractional Inch 0.005 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0150 rad MEF-125-750-015K

Corner Radius End Mill 1/8 in Milling Dia. Carbide nACRo Straight Fractional Inch 1/64 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0050 rad MEF-125-750-005

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.005 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad MEF-125-375-010

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad MEF-125-1000-010

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0050 rad MEF-125-375-005

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.005 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad MEF-125-750-010

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 1/8 in 2 in more

Micro 100 Sq. End Mill Single End Carb 1/8 SEM-125-04X

Square End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/4 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 CRE-125-030 Corner Rounding End Mill: 0.03 Radius 1/8 Diam 3 Flute

Micro 100 CRE-125-030 Corner Rounding End Mill: 0.03 Radius 1/8 Diam 3 Flutes Solid Carbide 2 OAL 1/8 Shank Dia Bright/Uncoated Double End Priced and sold as each (1). more

Micro 100 Square End Mill 1/32 Dia 5/64 Cut GEC-031-2-005

End Mill 1/32 in Milling Dia. Bright (Uncoated) Length of Cut 5/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 1/16 EMS-062-2

Square End Mill 1/16 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Cor. Rad. End Mill 0.125 CR Carbide ARC-001-2-125S

Corner Radius End Mill 1 in Milling Dia. ZrN Fractional Inch 1/8 in 1 1/2 in 4 in more

Micro 100 Sq. End Mill Single End Carb 0.0220 SME-022-2

Square End Mill 1/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/32 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0450 SME-045-2

Square End Mill 1/32 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0250 SME-025-2

Square End Mill 1/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/32 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0170 SME-017-2

Square End Mill 1/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0220 RME-022-2

Square End Mill 1/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0160 SME-016-2

Square End Mill 1/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0310 SME-031-2

Square End Mill 1/32 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0170 RME-017-2

Square End Mill 1/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more