See Matches In
Narrow Search Results
Price Range
Brand
Stores
Best Seller | Features:Set includes 2 door rollersFeatures a top hung design that mounts to the side of your back doorSide mounting to back of doorComes with flat edge plastic wheelProduct Type: Shutter/Door AccessoryFunction: Style: IndustrialFinish: SilverHand... more | go to store |
These window screen tension springs are constructed of heat treated spring steel and come in a zinc plated finish. Tension springs of this style mount into the corners of 45 degree cut aluminum screen frames and add holding tension when inserted into... more | go to store |
This shelf support peg is constructed from steel and comes finished in brass. It fits a 1/4 in. diameter hole. This style peg is used in bookcases and cabinets with movable shelves. | Prime-Line Shelf Support Pegs, 1/4 in, Steel Construction, Brass... more | go to store |
These rosettes are constructed from steel and come plated in brass. The 2-1/4 in. diameter rosettes have 1-3/4 in. hole centers. For old style passage locks; fits standard knobs. Easily mounts to your door with included screws. Note: these rosettes... more | go to store |
This is a right-handed Dyad style casement operator (1-jointed arm). The high pressure diecast zinc operator base; steel arms, hardened steel worm drive and gears; as well as the stud bracket; are all protected with the corrosive resistant E-Gard... more | FREE shipping go to store |
This patio door latch lever is constructed of steel and diecast components. It features a 1/2 in. diameter centering ring and a 3/4 in. long tailpiece. This is a replacement latch for Prime-Line part C-1131 mortise style sliding door handle set, and it... more | go to store |
These rosettes are constructed from steel and come plated in brass. The 2-1/4 in. diameter rosettes have 1-3/4 in. hole centers. For old style passage locks; fits standard knobs. Easily mounts to your door with included screws. Note: these rosettes... more | go to store |
These vintage style door levers are constructed of diecast and come in optional finishes. They feature a heavy weighted casting design and unique silencer bushings for smooth operation. These levers include one 2-3/4 inch steel spindle, and one 3-5/8... more | go to store |
Prime-Line 1/4 in. Nylon Top Guides in White | 5.4 H x 3.75 W x 0.3 D in | Wayfair G 3063 This window guide is constructed from nylon. It features a snap-in design and helps keep your windows energy efficient. Used on Pacific, old-style windows. | Prime-Line 1/4 in. Nylon Top Guides in White | 5.4 H x 3.75 W x 0.3 D in | Wayfair more | go to store |
This black patio door handle is a surface with clamp latch style. Often found on older style patio doors, it is mounted on the door's inside frame and the clamp latch latches onto an extrusion (astragal) on the jamb. It has 2 in. handle height extruded... more | go to store |
This mailbox lock comes plated in brass. It features an easy spring clip-style installation. This style mailbox lock fits on Jensen's horizontal style mailboxes from January 1967 and vertical style mailboxes from November 1975 to the present. Size: 1"... more | go to store |
This mailbox lock comes plated in brass. It features an easy spring clip-style installation. This style mailbox lock fits on Jensen's horizontal style mailboxes from January 1967 and vertical style mailboxes from November 1975 to the present. Size: 1"... more | go to store |
This mailbox lock comes plated in brass. It features an easy spring clip-style installation. This style mailbox lock fits on Jensen's horizontal style mailboxes from January 1967 and vertical style mailboxes from November 1975 to the present. Size: 1"... more | go to store |
Features:Set includes: 2 Door rollersSteel constructionFeatures a center grooved ball bearing wheelMade in the USAProduct Type: Shutter/Door AccessoryFunction: Style: IndustrialFinish: SilverHand Painted: NoPrimary Material: SteelPrimary Material... more | go to store |
These window screen tension springs are constructed of heat-treated spring steel and come in a zinc-plated finish. Tension springs of this style mount onto the sides of aluminum screen frames and provide holding tension when inserted into sliding... more | go to store |
This is a right-hand cam style casement locking handle that rotates 90 degrees to lock or unlock the sash. It is diecast construction with a baked enamel bronze finish. The latch rotates over the keeper to tightly lock the sash against the... more | go to store |
These thumbscrew window locks are constructed of heavy-duty extruded aluminum, and each come with a steel thumbscrew in a bronze painted finish. Window locks like these are designed for use on older style horizontal and vertical sliding windows,... more | go to store |
This is a unique, one of a kind, trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... more | go to store |
This door insert is constructed of zinc alloy (cast Zamak) and it comes in an unplated finish. It features an open-end style, and it installs at the top of partition doors that have square edges and measure 1 inch thick. This door insert measures... more | go to store |
This Closet Door Roller assembly is constructed from nylon. It features an adjustable top mount steel bracket that also acts as a corner bracket for steel frame bypassing doors. This style roller fits on Acme and similar styled doors. | Prime-Line... more | go to store |
This is a unique one of a kind trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... more | go to store |
This is a wood window sash balance for a 6 lb. window or 12 lbs. If one is used on both sides. This sash balance style has been used by a variety of manufacturers of windows for a variety of decades. It fits a 3-1/4 in. by 6-3/8 in. pocket that has... more | FREE shipping go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. It is a "K" tab patio door roller assembly with a 1-1/4 in. concave or grooved nylon ball bearing roller. The "K" tab style back end is a T... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is an Arcadia style roller... more | go to store |
These vintage style door levers are constructed of diecast and come in optional finishes. They feature a heavy weighted casting design and unique silencer bushings for smooth operation. These levers include one 2-3/4 inch steel spindle, and one 3-5/8... more | FREE shipping go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is an Arcadia style roller... more | go to store |
This is a diecast unique back patio door roller assembly with a 1-1/4 in. concave steel ball-bearing roller used by a variety of patio door manufacturers. Its diecast housing is a cross between the Unique or the Plain Back styles. It is 11/16 in. wide... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is an Arcadia style roller... more | go to store |
These window screen tension springs are constructed of heat treated spring steel and come in a zinc plated finish. Tension springs of this style mount onto the sides of aluminum screen frames and provide holding tension when inserted into sliding... more | go to store |
These vintage style door levers are constructed of diecast and come in optional finishes. They feature a heavy weighted casting design and unique silencer bushings for smooth operation. These levers include one 2-3/4 inch steel spindle, and one 3-5/8... more | FREE shipping go to store |
This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... more | go to store |
This is a left-handed Dyad style casement operator (1-jointed arm). The high pressure diecast zinc operator base; steel arms, hardened steel worm drive and gears; as well as the stud bracket; are all protected with the corrosive resistant E-Gard... more | FREE shipping go to store |
This roller is constructed from nylon and comes affixed to an adjustable bracket. It features a 1/4 in. offset top hung side mounted design. Fits on Cox and similar style doors that are 3/4 to 1-3/8 in. thick. | Prime-Line Closet Door Roller, Front,... more | go to store |
This Pocket Door Top Roller is constructed from nylon and comes affixed to a die cast bracket. It is used as a fixed back roller on pocket doors. This style roller fits on E-Z Glide and similar styled pocket doors. | Prime-Line 1-1/4 in. Nylon Pocket... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This insert style sliding screen... more | go to store |
This is a is an older style of casement lock, plated brass on zinc diecast, and used on older style wood casement windows. The three different keepers allow for most mounting applications whether it be a swing-in or swing-out casement window. Mounting... more | go to store |
This black patio door handle is a surface with clamp latch style. Often found on older style patio doors, it is mounted on the door's inside frame and the clamp latch latches onto an extrusion (astragal) on the jamb. It has 2 in. handle height extruded... more | go to store |
This black patio door handle is a surface with clamp latch style. Often found on older style patio doors, it is mounted on the door's inside frame and the clamp latch latches onto an extrusion (astragal) on the jamb. It has 2 in. handle height extruded... more | go to store |
Ads related to modern style 4 in 1