Irwin › irwin marathon 8 in dia

Irwin Marples 1-7/8 in. Dia. x 6 in. L Carbon Steel Forstner Drill Bit 3/8 in. Round Shank 1 pc.

Bores perfectly smooth flat bottomed holes. More accurate holes at any angle. Use for boring overlapping holes or pocket holes. Reduced shank fits 3/8 inch and larger drills and drill presses. more

Irwin 3/8 in. Dia. x 5-7/8 L High Speed Steel Left Hand Drill Bit Round Shank 1 pc.

Bit is constructed of high speed steel for the best combination of strength heat resistance and wear resistance; 135-degree split point reduces feed pressure and allows for easier penetration without work hardening. Can be used with screw extractors.... more

Irwin Speedbor 1 3/8 in. Dia. x 6 in. L Carbon Steel Wood Boring Bit 3/8 in. Quick-Change Hex Shank

Speedbor maximum Drill Bit 1-3/8 x 6 inch 1-3/8 inch x 6 inch Speedbor maximum Drill Bit standard length Tri Flute design for faster chip ejection cutting spurs have 3 cutting edges for added durability full screw tip allows bit to self feed grooved... more

Irwin 29/64 in. Dia. x 5-5/8 in. L High Speed Steel Drill Bit 3/8 in. Straight Shank 1 pc.

Black Oxide HSS Fractional straight shank jobber length drill bits with 135 split point tip starts drilling immediately and eliminates walking. more

Irwin 3/8 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1 pc.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53 HRC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

Irwin Marples 1 in. Dia. x 6 in. L Carbon Steel Forstner Drill Bit 3/8 in. Round Shank 1 pc.

Bores perfectly smooth flat bottomed holes. More accurate holes at any angle. Use for boring overlapping holes or pocket holes. Reduced shank fits 3/8 inch and larger drills and drill presses. more

Irwin Speedbor 2-1/8 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Speedbor Speedbor Flat Bit 5/8 Inches Dia. - 1 per BIT - 88810

Patented micro-groove cutting edge and spurs produce a smoother hole finish. 1 per BIT Double spur design scribes the hole before the chips are made. producing a cleaner hole and reducing vibration. All bits have a 1/4Inches hex shank that fits all... more

Irwin Marples 10 Dia. x 5/8 in. Carbide Woodworking Circular Saw Blade 60 teeth 1 pc.

The Irwin Tools 1807369 Marples Laser Cut 10 inch 60 Teeth Alternate Tooth Bevel Circular Saw Blade is part of a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking... more

Irwin 3/8 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 5/16 in. Hex Shank 1 pc.

Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter producing a... more

Irwin 7/8 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 1 pc.

IRWIN Auger Bit is for fast rough or clean and exact holes. Irwin s extensive line of woodboring drill bits provide the user with the best available tools for each application in achieving their drilling needs. more

Irwin Speedbor Speedbor Flat Bit 1 1/8 Inches Dia. - 1 per BIT - 88818

Patented micro-groove cutting edge and spurs produce a smoother hole finish. 1 per BIT Double spur design scribes the hole before the chips are made. producing a cleaner hole and reducing vibration. All bits have a 1/4Inches hex shank that fits all... more

Irwin 24030 Circular Saw Blade 7-1/4 in Dia 5/8 in Arbor 24-Teeth Carbide Cutting Edge

BLADE CIRC SAW 7-1/4 24T Thin kerf 0.071 in saw blade for portable corded saws. New heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Construction-grade carbide teeth for longer life. Reinforced shoulder for added... more

Irwin WeldTec 7/8 in. Dia. x 17 in. L Auger Bit 7/16 in. Quick-Change Hex Shank 1 pc.

The Irwin with WeldTec ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard... more

Irwin Unibit 1/4 to 1-3/8 in. Dia. x 6 in. L High Speed Steel Step Drill Bit 7/16 in. Hex Shank

The Irwin unibit high-speed steel fractional self-starting step drill 5 1/4 inch - 1-3/8 inch is ideal for drilling clean smooth holes in mild steel copper bass aluminum plexiglass wood and laminate. Crafted of high-speed steel it has a speed point tip... more

Irwin Marples 10 Dia. x 5/8 in. Carbide Woodworking Circular Saw Blade 40 teeth 1 pc.

The Irwin Tools 1807367 Marples Laser Cut 10 inch 40 Teeth Alternate Tooth Bevel Circular Saw Blade is part of a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking... more

Irwin Speedhammer Plus 3/4 in. Dia. x 8 in. L Steel Drill Bit 1/4 in. SDS-Plus Shank 1 pc.

IRWIN hammer drill bits incorporate a patented new flute design that removes dust more efficiently for faster drilling and longer bit life. The carbide tip design also patented by IRWIN offers the optimum combination of speed and centering for more... more

Irwin 1/2 in. Dia. x 6 in. L High Speed Steel Drill Bit 3/8 in. Round Shank 1 pc.

Titanium Nitride coating resists heat and friction extending the cutting edge life up to 6 times that of other high-speed step drill bits. Made from premium high-speed steel for increased durability. 135-degree split-point tip starts drilling... more

Irwin Marples 2 in. Dia. x 6 in. L Carbon Steel Forstner Drill Bit 3/8 in. Round Shank 1 pc.

IRWIN marples wood drilling Forstner bits are constructed of tough carbon steel to stay sharp and produce precise pocket holes and flat-bottomed (Blind) holes. The ultra-sharp cutting teeth feature optimized angles to cut through hard and soft woods in... more

Irwin Marples 12 Dia. x 5/8 in. Carbide Woodworking Circular Saw Blade 60 teeth 1 pc.

The Irwin Tools 1807383 Marples Laser Cut 12 inch 60 Teeth Alternate Tooth Bevel Circular Saw Blade is part of a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking... more

Irwin Multi Size Dia. Steel Wood Countersink 1/4 in. Round Shank 8 pc.

IRWIN Wood Countersinks feature a tapered drill and wide flutes that drill fast clean pilot holes and ensure a tight fit for screws. They have an adjustable four cutter counter bore attachment that cuts fast and clears chips quickly for fast smooth... more

Irwin 3/8 in. Dia. High Speed Steel Countersink 1/4 in. Round Shank 1 pc.

* * IRWIN High Speed Steel Countersinks feature a precision-ground 82-degree tip that makes them ideal for countersinking into most machinable metals. They re made from industrial grade high speed steel for increased durability and they include a black... more

Irwin Weldtec Ship Auger Bit Weldtec 7/16 Auger Bit 17 Length 3/8 3/4 Dia

IRWIN WELDTEC SHIP AUGER 7/16 x 17 7/16 quick change impact shank Full forged body on bits 3/4 diameter or larger Speedbor with Weldtec ship auger bits more

Irwin Bi-Metal Hole Saws Sets 7/8 in - 2 1/2 in Cut Dia 1 EA (585-3073003)

Irwin Bi-Metal Hole Saws Sets Contains the most commonly used sizes for plumbers electricians and general applications. 4/6 Variable pitch teeth for reduced noise and improved performance. Super hard steel RC 65-66 for increased life. Bi-metal... more

Irwin 5026020 Rotary Percussion Masonry Drill Bit 5/8 in Dia x 13 in OAL

Tungsten carbide tip is durable when drilling in concrete and brick. Deep single flute removes dust fast for increased drilling speed and longer bit life. Diamond ground tip has aggressive cutting angles for increased drilling speed. Fits all hammer... more

Irwin 3/8 in. Dia. x 18 in. L Steel Bell Hanger Bit Straight Shank 1 pc.

Irwin Straight Shank Wood Installer Bits feature an 82 degree point for fast smooth drilling in wood. These bits are made with a hole in the flute for easy wire pulling through walls ceilings and floors. They have a 3 flatted shank to prevent slipping... more

Irwin 5/8 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53 HRC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

Irwin 5/8 - 1-3/4 in. Dia. x 5-1/2 in. L High Speed Steel Wood Boring Bit 7/16 in. 6-Flat Shank 1 pc.

Lockhead Drill Press Adjustable Wood Bit 2 Cutters: 5/8 -1 and 1 -1-3/4 9/32 Shank Size 5-1/2 Overall Length Wedge Type Blade Lock and Slow Feed SScrew Point Special Precision Ground Shank Has 3 Equally Spaced Flats For Use In Drill Presses Having 3... more

Irwin Speedbor 1-1/8 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin 5/8 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 5/16 in. Hex Shank 1 pc.

Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter producing a... more

Irwin 324025 Standard Tip Hammer Drill Bit 7/8 in Dia x 16 in OAL Chrome Vanadium Steel

Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to... more

Irwin Marples 1-1/2 in. Dia. x 6 in. L Carbon Steel Forstner Drill Bit 3/8 in. Round Shank 1 pc.

Bores perfectly smooth flat bottomed holes. More accurate holes at any angle. Use for boring overlapping holes or pocket holes. Reduced shank fits 3/8 inch and larger drills and drill presses. more

Irwin 10 Dia. x 5/8 in. Carbide Classic Circular Saw Blade 40 teeth 1 pc.

Irwin Tools Classic Series Carbide Table / Miter Circular Saw Blades 10 inch 40 Teeth Precision-ground teeth allow for smooth accurate cuts. Fully hardened plate runs truer longer. Heavy-gauge high-carbon steel for extended life. Features a 5/8 inch... more

Irwin Marples 1 1/4 in. Dia. x 6 in. L Carbon Steel Forstner Drill Bit 3/8 in. Round Shank 1 pc.

Bores perfectly smooth flat bottomed holes. More accurate holes at any angle. Use for boring overlapping holes or pocket holes. Reduced shank fits 3/8 inch and larger drills and drill presses. more

Irwin 5026009 Rotary Percussion Masonry Drill Bit 3/8 in Dia x 4 in OAL

Irwin Carbide Tipped Straight Shank 3/8 in Diameter: 3/8 in. Overall Length: 4 in. Material: Carbide Tipped Product Type: Rotary Drill Bit Shank Type: Straight Shank Number in Package: 1 pc. Usage: Drilling concrete and brick Packaging Type: Carded... more

Irwin 10 in. Dia. x 5/8 in. Steel Classic Circular Saw Blade 24 teeth 1 pk

Irwin Tools Classic Series Carbide Table / Miter Circular Saw Blades 10-Inch 24 Teeth (15070) Precision-ground teeth allow for smooth accurate cuts. Fully hardened plate runs truer longer. Heavy-gauge high-carbon steel for extended life. Features a 5/8... more

Irwin 6-1/2 Dia. x 5/8 Classic Carbide Circular Saw Blade 24 teeth 1 pk

The IRWIN Classic Series Circular Saw Blades are the best value for an economy blade. more

Irwin WeldTec 1-1/8 in. Dia. x 17 in. L Auger Bit 7/16 in. Quick-Change Hex Shank 1 pc.

The Irwin with WeldTec ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard... more