You're in Hunting & Archery Equipment
See Matches in:
Narrow Search Results
| Best Seller  | Brownells High-Speed Steel Cutting Kits For Lathes - 1/2" Threader Kit - High-Speed Steel Cutting 1/ Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow... more | go to store |
 | Brownells High-Speed Steel Insert - Relief 0 Degrees, Thickness .125", Radius .0156" High Speed Steel inserts may be the answer to many machining problems where other materials fail by chipping or breakage. High Speed Steel performs at slow surface speeds while providing a good surface finish, without chipping or breaking. This is in... more | go to store |
| Best Seller  | Brownells High-Speed Steel Cutting Kits For Lathes - 3/8" Turning Kit - High-Speed Steel Cutting 3/8 $20 off $200+. Use code SEPT20Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow... more | go to store |
 | Brownells High Speed Steel Wilson Dovetail Cutter - 60 Hss Wilson Dovetail Cutter .290" 2" (5cm) long. .375" (9.5mm) diameter shaft. 60� shoulder. DO NOT EXCEED 700 rpm, HIGHER SPEED WILL BREAK TEETH. Sight is a .300" x 60 degree dovetail that may require machining of slide. Mfg: Brownells SPECS: Sight body steel with matte black (blued)... more | go to store |
 | Brownells High-Speed Steel Cutting Kits For Lathes - 3/8" Cut-Off Kit - High-Speed Steel Cutting 3/8 Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow... more | go to store |
 | Brownells 1911 Stock Taps - 1911 Screw Tap (.150-50) 1911 Auto Stock Taps are high speed steel. 1911 Bushing Tap (.236-60), 1911 Screw Tap (.150-50). Mfg: Brownells more | go to store |
 | Brownells High-Speed Steel Cutting Kits For Lathes - 35/ Profile Kit - High-Speed Steel Cutting 35 Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow... more | go to store |
 | Brownells High-Speed Steel Insert - 0 Degree Relief, Thickness: .125", Shape: Triangle High Speed Steel inserts may be the answer to many machining problems where other materials fail by chipping or breakage. High Speed Steel performs at slow surface speeds while providing a good surface finish, without chipping or breaking. This is in... more | go to store |
 | Brownells High-Speed Steel Insert - 0 Degree Relief, Thickness: .125", Radius: .025" High Speed Steel inserts may be the answer to many machining problems where other materials fail by chipping or breakage. High Speed Steel performs at slow surface speeds while providing a good surface finish, without chipping or breaking. This is in... more | go to store |
 | Brownells High Speed Steel Standard Sight Base Cutter - 60 Hss Standard Sight Base Cutter .359" Universal Sight Base Cutter made for sights with 60� shoulder and a 3/8" base. Cuts most standard front and rear rifle sights as well as 1911 Auto low-mount, adjustable sights like E.E.A. Super Sights, Millett and current Bo-Mar. Cutter is slightly... more | go to store |
 | Brownells 1911 Stock Taps - 1911 Bushing Tap (.236-60) 1911 Auto Stock Taps are high speed steel. 1911 Bushing Tap (.236-60), 1911 Screw Tap (.150-50). Mfg: Brownells more | go to store |
 | Brownells High Speed Countersink - Countersink #1 - 3/64" Drill Diameter 1/8" Body Diameter 60� High speed steel countersinks. Mfg: Brownells SPECS: 60� High speed steel. more | go to store |
 | Brownells High Speed Countersink - Countersink #3 - 7/64" Drill Diameter 1/4" Body Diameter 60� High speed steel countersinks. Mfg: Brownells SPECS: 60� High speed steel. more | go to store |
 | Brownells Ar-15/M16 Flash Suppressor Die - 1/2-28 Carbon Steel Hex Die A must when threading custom barrels or chasing threads on standard barrels. Use to make custom supressors or clean up existing factory threads. Custom-made to factory specs. Mfg: Brownells SPECS: High-speed steel. AR-15/M16 - .500"-28 thread, 1" dia.... more | go to store |
 | Brownells 45� Tin Coated Cylinder Chamfering Cutter - 45 Tin Coated Cylinder Chamfering 5/8" Diamet High-speed steel chamfer cutter makes perfect 45� angle cuts for easier cylinder filling with speed loaders. TiN coating on the cutting surface allows for smooth, chatter-free cuts and longer cutting life even on tough metals such as scandium. Also... more | go to store |
 | Brownells Barrel/Receiver Dies - Fn/Fal Barrel Die Clean and chase dinged or imperfect threads. Real lifesavers for any rebarreling job, especially good when installing any of our "no-lathe", pre- threaded barrels. Thanks to Walt Warren for his suggestion. Mfg: Brownells SPECS: High speed steel. Dies... more | go to store |
 | Brownells Barrel/Receiver Dies - Large Ring Mauser Die Clean and chase dinged or imperfect threads. Real lifesavers for any rebarreling job, especially good when installing any of our "no-lathe", pre- threaded barrels. Thanks to Walt Warren for his suggestion. Mfg: Brownells SPECS: High speed steel. Dies... more | go to store |
 | Brownells Barrel/Receiver Dies - Rem. 700 Die $20 off $200+. Use code SEPT20Clean and chase dinged or imperfect threads. Real lifesavers for any rebarreling job, especially good when installing any of our "no-lathe", pre- threaded barrels. Thanks to Walt Warren for his suggestion. Mfg: Brownells SPECS: High speed steel. Dies... more | go to store |
 | Brownells Ar-15/M16 Flash Suppressor Die - Ar-10 5/8"-24 Thread Cutting Die A must when threading custom barrels or chasing threads on standard barrels. Use to make custom supressors or clean up existing factory threads. Custom-made to factory specs. Mfg: Brownells SPECS: High-speed steel. AR-15/M16 - .500"-28 thread, 1" dia.... more | go to store |
 | Brownells Ar-15/M16 Flash Suppressor Tap - Ar-10 5/8"-24 Bottoming Tap A must when threading custom barrels or chasing threads on standard barrels. Use to make custom supressors or clean up existing factory threads. Custom-made to factory specs. Mfg: Brownells SPECS: High-speed steel. AR-15/M16 - .500"-28 thread, 1�" dia.... more | go to store |
Ads related to high speed steel counterbore 0
