Hunting & Archery Equipment › 2 in 1 extended patio

Leupold Standard Rings - 1" Low Extended Gloss Standard Rings

Classic steel, holds scope tightly. Fits Leupold STD, one- and two-piece bases, plus bases from Burris, Millett and Redfield. Mfg: Leupold SPECS: Steel 1" (2.5cm), 26mm (1.02") or 30mm (1.18") I.D. Gloss, polished blue. Matte, matte blue. Silver, satin... more

Leupold Standard Rings - 1" Medium Extended Gloss Standard Rings

Classic steel, holds scope tightly. Fits Leupold STD, one- and two-piece bases, plus bases from Burris, Millett and Redfield. Mfg: Leupold SPECS: Steel 1" (2.5cm), 26mm (1.02") or 30mm (1.18") I.D. Gloss, polished blue. Matte, matte blue. Silver, satin... more

Case BESH Wedge Fixed Blade Knife Earth Brown G-10 1015-6 1/2 SS 21945

Case BESH Wedge Fixed Blade Knife Earth Brown G-10 1015-6 1/2 SS 21945. 75"" overall. 6.5"" satin finish stainless blade. Green linen G10 handle. stainless guard. Full tang. Lanyard hole. 1015.61/2SS pattern. Extended tang. Black Kydex belt sheath.... more

Wilson Combat 1911 Extended Slide Release - S/S Ext. Slide Release

Wider and longer than the factory lever so the shooter can keep his eyes on the target during magazine changes. Reduces recovery time greatly. Deeply grooved for no-slip grip. Mfg: Wilson Combat SPECS: 1-1/8" (2.8cm) long x 3/16" (4.8mm) wide contact... more

Tandemkross Race Gun Kit For The Sw22 Victory - Race Gun Kit For The Sw22 Victory-Black

The kit contains: 1 - "halo" Charging Ring 1 - "Victory" Trigger 1 - "Titan" Extended Magazine Release 2 - "VictoryPRO" base pads Mfg: Tandemkross more

JP Enterprises Flat Top One Piece Extended Eye Relief Optical Mount For Picatinny Rail Fits 30Mm And 1 Inch Scopes w/Adapter Rings Black JPFTSM-30/1E

JP Enterprises Flat Top One Piece Extended Eye Relief Optical Mount For Picatinny Rail Fits 30Mm And 1 Inch Scopes w/Adapter Rings Black JPFTSM-30/1E. This 2-in-1 mount system is compatible with 35mm 34mm 30mm or 1 inch Rifle Scopes. The One Piece Flat... more

Pearce Grip Grip Extension For Glock - Fits Glock Gen 4/5 26/27/33, Adds 2 9mm, Addes 1 40/357

Lets you use your entire hand to grip the gun for better recoil control and more consistent shot placement. Extended "shelf" for the little finger attaches in place of the factory magazine base. Makes shooting these little "handfuls" a lot more... more

Warne Gen 2 Extended Skeletonized MSR Mount 1 Inch Tube Ultra High Dark Earth XSKEL1DE

Warne Gen 2 Extended Skeletonized MSR Mount 1 Inch Tube Ultra High Dark Earth XSKEL1DE. Warne machined these Riflescope Mounts & Bases with a 6061 aluminum body that drastically reduces weight without impacting its function. The Warne Gen 2 Extended... more

Warne Gen 2 Extended Skeletonized MSR Mount 1 Inch Tube Ultra High Black XSKEL1TW

Warne Gen 2 Extended Skeletonized MSR Mount 1 Inch Tube Ultra High Black XSKEL1TW. Warne machined these Riflescope Mounts & Bases with a 6061 aluminum body that drastically reduces weight without impacting its function. The Warne Gen 2 Extended... more

Weaver Extended Savage Multi Slot Base System Savage Axis 1 & 2 8-40 Post-June

Enjoy optical superiority with Weaver Multi-Slot Bases. These Picatinny bases are designed for specific models of firearms and provide an additional 1 inch of forward length for more mounting options. Manufactured from 6061-T6 aluminum and protected by... more

Weaver Mounts Extended Multi-slot Base Weav 99610 Ext Multi Slot Base Sav Axis &2 8/40

Enjoy optical superiority with our tactical multi-slot bases.These picatinny bases are designed for specific models of firearms and provide an additional 1 inch of forward length for more mounting options.Manufactured from 6061-t6 aluminum and... more

Weaver Mounts Extended Multi-slot Base Weav 99611 Ext Multi Slot Base Sav Axis &2 8/40

Enjoy optical superiority with our tactical multi-slot bases.These picatinny bases are designed for specific models of firearms and provide an additional 1 inch of forward length for more mounting options.Manufactured from 6061-t6 aluminum and... more

High Speed Gear Gen 2 Extended Pistol Taco MOLLE Pistol Magazine Pouch Nylon SKU - 593618

The Generation 2 Extended Pistol TACO is sleeker, lighter, and more versatile than the original. Like the Original Extended Pistol TACO, the Gen 2 Extended Pistol TACO holds 1 long pistol or SMG magazine, or similarly sized items such as batons or... more

High Speed Gear Gen 2 Extended Pistol Taco MOLLE Pistol Magazine Pouch Nylon SKU - 946053

The Generation 2 Extended Pistol TACO is sleeker, lighter, and more versatile than the original. Like the Original Extended Pistol TACO, the Gen 2 Extended Pistol TACO holds 1 long pistol or SMG magazine, or similarly sized items such as batons or... more

High Speed Gear Gen 2 Extended Pistol Taco MOLLE Pistol Magazine Pouch Nylon SKU - 861114

The Generation 2 Extended Pistol TACO is sleeker, lighter, and more versatile than the original. Like the Original Extended Pistol TACO, the Gen 2 Extended Pistol TACO holds 1 long pistol or SMG magazine, or similarly sized items such as batons or... more

Vortex Precision QR Extended Cantilever 30mm Mount (2" Offset) CM-404

Vortex Precision QR Extended Cantilever 30mm Mount (2" Offset) For 30mm Maintubes, 2" Forward Offset, Works with Flattop AR-15 Rifles, Holds Center at 1.49", Two Quick Release Locks, Picatinny/Weaver Rail Mount, 6061-T6 Anodized Aluminum... more

Wilson Combat 1911 Extended Slide Release - Blue Ext. Slide Release

Wider and longer than the factory lever so the shooter can keep his eyes on the target during magazine changes. Reduces recovery time greatly. Deeply grooved for no-slip grip. Mfg: Wilson Combat SPECS: 1-1/8" (2.8cm) long x 3/16" (4.8mm) wide contact... more

Warne Mfg. Company Maxima 2-Piece Steel Bases - Savage Round Rear/Axis/Edge Extended, Matte

The Warne Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today. The low profile of the Maxima Steel Bases give your firearm a sleek look. When used in... more

Arredondo S&W M&P Extended Magazine Base Pad - Pad Fits 9mm/.40 S&W M&P,5 Or 6 Rds,1-1/4" Addl Mag O

Two-piece, extended base pad replaces factory pad to increase magazine capacity without compromising reliability. Molded from impact-resistant, fiberglass-reinforced nylon to protect your magazine from damage when ejected onto hard ground or pavement.... more

Brownells Solid Carbide End Mills - 1/4" (6.35mm) Dia. 2.5" (6.3cm) Overall

The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with dovetail cutter.) Gives extended tool life when used in softer metals. 3/16" diameter is... more

Redding Extended Shellholders - Redding Extended Shellholder #1

Extended shellholders are required when trimming short cases under 1-1/2" OAL. They are machined to the same tolerances as the Redding standard shellholders except they are longer. Mfg: Redding more

Hawke Sport Optics One Piece 11mm to Weaver Rail Adapter Extended 7.2in

Condition: New Color: Black Gun Model: Universal Fabric/Material: Aluminum Base/Mount Type: Weaver Weight: 4.2 Finish: Anodized more

Bow for Protection Wax String Recurve Bow Compound Extended Life Outdoor Tool

brand new and high quality. Protects bowstrings suitable for traditional recurve bows etc. Color: White Material: Wax Size: 6.6cm (2.6in) × 1.5cm (0.59in) Quantity: 1pc Note:Please allow 1-3cm error due to manual measurement. please make sure you do... more

Leupold Standard Rings - 1" High Extended Gloss Standard Rings

Classic steel, holds scope tightly. Fits Leupold STD, one- and two-piece bases, plus bases from Burris, Millett and Redfield. Mfg: Leupold SPECS: Steel 1" (2.5cm), 26mm (1.02") or 30mm (1.18") I.D. Gloss, polished blue. Matte, matte blue. Silver, satin... more

Gold Tip Pierce Lrt Arrows 300 2.1 In. Fusion X Ii Vanes 6 Pk.

Built from the proven Pierce shaft now with tighter tolerances and improved components the Pierce LRT is Gold Tip s most advanced long-range tactical hunting arrow. Micro diameter for better penetration and less wind drift at extended range. The... more

Gold Tip Pierce Lrt Arrows 250 2.1 In. Fusion X Ii Vanes 6 Pk.

Built from the proven Pierce shaft now with tighter tolerances and improved components the Pierce LRT is Gold Tip s most advanced long-range tactical hunting arrow. Micro diameter for better penetration and less wind drift at extended range. The... more

2024 Alloy Lengthen Quick Release Plate Accessory with 1/4in Screw for DJI RSC 2 Stabilizer

1�Designed for DJI RSC2 stabilizer with extended quick mounting plate the leveling range is wider convenient for the stabilizer to be levelling. 2�Made of high quality alloy strong and durable. Surface anodized treatment anti-oxidation and... more

DIRK 6.75 (17.1 cm) Stainless Steel Pocket Knife | Compact Design With 2.75 Blade Which Folds Into The 4 Handle | Great For Camping Fishing Cutting Cardboard Slicing Rope Opening Packages

DIRK HUNTING KNIVES Hawk (PK-09030)is a symbol of precision engineering in the world of pocket knives. Measuring 6-3/4 (17.1 cm) when fully extended this sleek knife epitomizes the perfect balance between aesthetics and functionality. Its polished... more

Meopta Ballistic Hunting Turret 1.5 for MeoStar R2 1-6x23 Black

Ballistic Hunting Turrets (BHT) are user installed over the existing elevation adjustment to allow for two additional predetermined extended zero ranges. This allows the shooter to quickly adjust zero to a pre-set range for rapid shots in the field. more

Apex Aegis Pro Series Sight 2-Dot LED

Dual Micro-LED 1.8� aperture. Multi-plex ADC reticle. Micro adjustable windage adjustment. Adjustable for left and right-handed users. Push button brightness with 11 brightness settings Helical elevation gear for smooth adjustments Extended elevation... more

Stud for 22320/22300 + 1.50in

Ball Joint Stud - 1.500 in/ft Taper - 4.840 in Long - Plus 1.5 in Extended Length - 1.437 in Ball - 1/2-20 in Thread - Steel - Natural - Each more

Spuhr 34mm Cantilever Gen 3 Rifle Scope Mount 1.5 in 0 MOA Black

A combination of the extended cantilever of the SP-4026 and the absolute co-witness of the SP-4016. Allows the scope to be mounted 70 mm/2.76in further forward than with a non-cantilever mount.0 MIL/0 MOAHeight: 38 mm/1.5inLength: 140 mm/5.51inWeight:... more

Spuhr Cantilever Rifle Scope Mount 30mm 1.89in

Extended high cantilever mount intended for use on AR-platforms with illuminators mounted on top of the handguard. Allows the scope to be mounted 70 mm/2.76in farther forward than with a non-cantilever mount.Note: Will not fit the SAKO S20 or rifles... more

Spuhr 30mm Cantilever Gen 3 Rifle Scope Mount 1.5 in 0 MOA Black

Spuhr SP-3022C: 30mm Cantilever Mount 0 MOA - 1.5 Extended cantilever. Allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount.10-Degree wedge included 0 MIL/0 MOAHeight: 38 mm/1.5”Length: 140 mm/5.51” more

Spuhr 30mm Cantilever Gen 3 Rifle Scope Mount 1.5 in 20.6 MOA Black

Spuhr SP-3622C: 30mm Cantilever Mount 6 MIL - 1.5 Extended cantilever. Allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount.10-Degree wedge included 6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 140 mm/5.51 more

Centennial Defense Systems Extended Control Kit for Gen 1-3 Glock 2 Pins Hi-Viz Orange 40026

Centennial Defense Systems Extended Control Kit for Gen 1-3 Glock 2 Pins Hi-Viz Orange 40026. The pins and slide lock lever are machined from high quality stainless steel and are direct replacements for most Gen 1-5 Glock models with no extra fitting... more

Centennial Defense Systems Extended Control Kit w/Serrated Mag Release for Gen 1-3 Glock 9mm .40S&W .357SIG 2 Pins Red 40116

Centennial Defense Systems Extended Control Kit w/Serrated Mag Release for Gen 1-3 Glock 9mm .40S&W .357SIG 2 Pins Red 40116. The pins and slide lock lever are machined from high quality stainless steel and the magazine release is machined from 6061... more

Centennial Defense Systems Extended Control Kit for Gen 1-3 Glock 2 Pins Black 40001

Centennial Defense Systems Extended Control Kit for Gen 1-3 Glock 2 Pins Black 40001. The pins and slide lock lever are machined from high quality stainless steel and are direct replacements for most Gen 1-5 Glock models with no extra fitting required.... more