Prime Line Products › hosa gmp 112 1 4

1 Pc Prime-Line 1-1/2 In. L X 11/32 In. D Compression Spring 4 Pk

Finish: *Length: 1-1/2 *Material: Steel *Number in Package: 4 *Packaging Type: Bagged *Product Type: Spring *Brand Name: Prime-Line *Spring Type: Compression *Diameter: 11/32 *End Type: *Sub Brand: Wire Gauge: .047 more

Prime-Line P-Trap, 1-1/2 in. x 1-1/2 in. x 1-1/4 in, Polypropylene (PVC) (1 Set) in White | 12.6 H x 1.5 W x 0.65 D in | Wayfair MP53505

This P-Trap is constructed of polypropylene (PVC) and comes white in color. Typically it is for use with drain pipe fittings. It can be used for kitchen, utility, bathroom and other sinks. There is a small amount of adjustability depending on your sink... more

Prime-Line Sash Lock, 1-1/2 in. & 1-7/8 in. Hole Centers (Single Pack) in Black | 5.4 H x 3.82 W x 1.13 D in | Wayfair F 2716

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a... more

Prime-Line Sash Lock, 1-1/2 in. & 1-7/8 in. Hole Centers (Single Pack) in Black | 5.4 H x 3.82 W x 1.13 D in | Wayfair F 2716

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a... more

5Pc Prime-Line 1-1/2 in. L X 1/4 in. D Extension Spring 2 pk

Prime-Line products has been supplying repair and replacement parts for windows and doors. These extension springs from Prime-Line are constructed from 0.035-gauge heat-tempered spring steel wire plated in a bright nickel finish. They offer superior... more

Prime-Line 9001726 Machine Screws Flat Head Phillips Drive 1/4 In.-28 X 1-1/2 in (10 Pack)

Prime-Line 9001726 Machine Screws Flat Head Phillips Drive 1/4 In.-28 X 1-1/2 in (10 Pack) Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw... more

Lag Shields Long 1/4 in. X 1-1/2 in. Zinc Alloy 50-Pack

Lag shield anchors allow lag screws to be installed into concrete and masonry walls. After drilling a hole into the material lag shields should be tapped into place ribbed side first until flush with the surface. The lag screw can then be installed... more

2Pc Prime-Line Prime Line Gray Vinyl Frameless Shower Bottom Mount Door Sweep 36 L x 5.4 H x 1-1/2 W in.

Brought to you by Prime Line is this shower door sweep! This frameless shower door sweep is constructed of flat vinyl strips that measure 1-1/2 inches in height and come in 36-inches in length. A metal removable drip rail located at the bottom of... more

1PACK Prime-Line 1-1/2 In. Dia. x 3/4 In. W. x 2-5/8 In. L. Steel Patio Door Roller with Adjustable Housing Assembly

Steel ball bearing roller with adjustable steel housing assembly. more

5PK Prime-Line 1-1/2 in. L x 11/32 in. Dia. Compression Spring 4/PK

Prime-Line products has been supplying repair and replacement parts for windows and doors since 1978. These compression springs from Prime-Line are constructed heat-tempered spring steel wire plated in a bright nickel finish. They offer superior... more

2Pc Prime-Line 1-1/2 in. D X 5/16 in. L Steel Roller Assembly 1 pk

This is a Plain Back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more

2Pc Prime-Line 1-1/2 in. D X 0.75 in. L Steel Roller Assembly 1 pk

Sliding Glass Door Roller Assembly 1-1/2� steel ball bearing roller adjustable steel housing assembly. Housing dimensions: thickness 3/4 length 2-5/16 height 1-3/16 overall thickness 13/16 . * more

1 PK Prime-Line 1-1/2 In. Sliding Door Roller Set (2 Count)

Combination of a steel concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into place or use a roll pin... more

Prime-Line D 1594 Steel Ball Bearing Sliding Patio Door Roller Assembly 1-1/2 In. - Quantity 6

Back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more

2Pc Prime-Line 1-1/2 in. D X 0.31 in. L Nylon/Steel Patio Roller 2 pk

Sliding Glass Door Roller Assembly 1-1/4� dual steel ball bearing roller. Adjustable steel housing assembly. Housing dimensions: thickness 1-9/16 in. length 2-1/4 in. height 1-3/16 inches. more

1-1/2 in. Sliding Glass Door Roller Assembly Marshall

This is a K-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide... more

Prime-Line D 1506 Nylon Roller with Ball Bearing Replacement 1-1/2 In. 2-Pk. - Quantity 6

2 Pack 1-1/2 in. Nylon Roller with Ball Bearing Replacement (2-pack). This is a combination of a 1-1/2 in. diameter nylon concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole and a combination of 5 different axle... more

Prime-Line D 1600 Adjustable 1-1/2 In. Steel Sliding Patio Door Roller Assembly - Quantity 6

Adjustable 1-1/2-in Steel Sliding Patio Door Roller Assembly. This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide with a 7/8 in. flare and is 1-9/16 in. tall.... more

Prime-Line D 1533 Sliding Door Roller Assembly Fits Fleetwood and Fullview Steel 1-1/2 In. - Quantity 6

1-1/2 in. Steel Sliding Door Roller Assembly Fleetwood and Fullview. This is a plain back diecast patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is 13/16 in. wide 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20... more

Prime-Line D 1822 1-1/2 In. Steel Ball Bearing Sliding Door Roller Assembly - Quantity 6

1-1/2 in. Steel Ball Bearing Sliding Door Roller Assembly. This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 27/32 in. flare and is 1-9/16 in.... more

Prime-Line D1822 Concave Edge Sliding Door Roller Assembly 1-1/2 x 5/16 Each

Highlights: Material: Steel Type: Concave Edge Sliding Roller Diameter: 1-1/2 Overall Depth: 1-9/16 Roller Width: 5/16 Bearing Type: Ball Tab Style: Plain Back 1-1/4 steel ball bearing roller Adjustable steel housing Yellow zinc plated for corrosion... more

2Pc Prime-Line 1-1/4 in. D X 0.69 in. L Nylon/Steel Roller Assembly 1 pk

Sliding Glass Door Roller Assembly 1-1/4� has a nylon ball bearing wheel. Adjustable steel housing. Dimensions: 11/16 Thick 1-1/2 Long 1-3/8 High. more

Prime-Line D 1532 1-1/4 In. Steel Ball Bearing Sliding Roller Assembly for Fleetwood - Quantity 6

1-1/4 in. Steel Ball Bearing Sliding Roller Assembly Fleetwood. This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide 1-3/16 in. tall and 1-1/2 in. long.... more

2Pc Prime-Line 1-5/16 in. D X 0.38 in. L Nylon Roller Assembly 1 pk

Sliding Glass Door Roller Assembly 1-5/16� nylon roller with bushing axle non adjustable nylon housing assembly. Housing Dimensions: Thickness 3/4 Length 1-1/2 ; Height 1-3/8 . * more

Prime-Line G 3004 Sliding Window Roller Assembly 7/16 In. Flat Nylon Roller 4-Pk. - Quantity 6

4 Pack Sliding Window Roller Assembly 7/16 in. Flat Nylon Roller. Flat edge suitable for use with: sliding window 7/16 in roller diameter 1/8 in roller width 1-1/2 in overall length 1/4 in overall width plastic White. This flat edge sliding window... more

Prime-Line GD 52169 Garage Door Locking T-Handle 5/16 x 4-5/8 In. Square Shaft Chrome - Quantity 6

This T-locking handle is constructed from zinc diecast and comes in a chrome plated finish. It features a 5/16 in. x 5-4/8 in. square shaft with an overall length of 6-3/8 in. from top of handle to end of shaft. The mounting hole are 1-1/2 in. on... more

1 PK Prime-Line Sliding Door Steel Roller Assembly

This patio door roller is constructed from steel. Back patio door roller assembly with a 1-1/2 inch concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 inches wide 1-1/4 inches tall and 2-3/8 inches long. It is rear... more

Prime Line 163137 2.13 in. Antique Brass Plated Pull Handle- Pack - 2

Antique Brass Plated Pull Handle- Pack - 2Specifications Dimension - 1.12 x 3.88 x 4.88 in. Item Weight - 0.1 lbs.Features Antique Brass Plated Round Mortise Brass Pull Handle With Nails Fits A 2-1/8 in. Diameter Hole Held In Place By 2 Nails Universal... more

Prime-Line Adjustable Steel Base Bypass Door Bottom Guide (2 Count) N 6560 N 6560 236543

Steel base with nylon tips. Fits 3/4 In. to 1-3/8 In thick by-passing doors. 5/8 In. H. Hardware included. .Type: AdjustableOverall length: 4-5/8 In.Overall Width: 1-1/2 In.Overall Height: 5/8 In.Color: WhiteMaterial: Steel Base/Nylon TipMount Type:... more

Prime Line 13728 Sliding Glass Door Roller Assembly- - 3.5 x 3.5 x 0.32 in.

Sliding Glass Door Roller Assembly.Specifications 1-1/2 in. Steel Ball Bearing Roller. Adjustable Steel Housing Assembly. Housing Dimensions: Thickness 11/16 in. Length 2-7/16 in. Height 1-1/8 in. Overall 3/4 in. Hole On Top Of Housing Is 10-32 Machine... more

Prime Line N 6582 Bifold Door Top Guide Roller

Highlights: Nylon base fits Cox doors 1/4 W nylon wheel with 7/16 OD x 1-1/2 H nylon base self-adjusts from 1-7/8 to 2-1/2 in track for smooth guiding of lead door For 1 to 1-3/8 thick bi-fold doors up to 30 lbs. each Top mount - Spring loaded Wheel... more

Prime Line N 6545 Wardrobe Door Pivot Each

Highlights: Fits Acme and Cox doors Spring-loaded 1/4 OD pin 7/16 OD x 1-1/2 H steel base and 3/8 OD x 1/2 H nylon guide cap For 1 to 1-3/8 thick bi-fold doors up to 50 lbs. each Includes optional guide cap Top mount more

Prime-Line Sash Lock, 1-1/2 in. & 1-7/8 in. Hole Centers, Steel, Satin Nickel (Single Pack) in Gray | 5.4 H x 3.7 W x 1.2 D in | Wayfair U 11062

This Sash Lock by Prime-Line Products is constructed of steel and comes in a beautiful, corrosion resistant, satin nickel-plated finish. It is a heavy-duty grade sash lock and features a cam-style latch action that provides a strong, rattle-resistant... more

Prime-Line Sash Lock, 1-1/2 in. & 1-7/8 in. Hole Centers (Single Pack) in Gray | 5.4 H x 3.82 W x 1.13 D in | Wayfair F 2713

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a... more

Prime-Line Adjustable 1-1/2 in. Steel Sliding Patio Door Roller Assembly (Single Pack) in Brown | 6.4 H x 3.75 W x 1.15 D in | Wayfair D 1600

This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide, with a 7/8 in. flare, and is 1-9/16 in. tall. Features a rear adjusting threaded mounting hole on the back... more

Prime-Line Door Viewer, 160 Degree, 1/2 in. Diameter, Polished Brass in Yellow | 1.12 H x 3 W x 1.4 D in | Wayfair MP4019-2

These door viewers are constructed of solid brass housings, and they come in a polished brass finish. The lenses of these viewers feature a 160-degree angle of view, and it can be installed on doors from 1-3/8 in. thick to 2-1/8 in. thick, with a... more

Prime-Line 3 in. x 1-1/2 in. Keeper, Chain Door Guard, Cast Bronze Alloy Plates (Single Pack) in Yellow | 5.7 H x 3.4 W x 1.55 D in | Wayfair

This chain door guard is constructed of high strength, cast bronze alloy and it comes in a brushed brass finish. Surface-mounted with secondary security-locking device, which mounts to swing-in entry doors of any thickness. Chain door guard locks like... more

Prime-Line International Sliding Glass Door Roller Assembly, 1-1/2 in. Nylon Ball (Single Pack) | 5.4 H x 3.75 W x 1.15 D in | Wayfair D 1789

This is a K-tab patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide... more