You're in Home Hardware
See Matches in:
Narrow Search Results
Price Range
By Brand
- Prime Line Products remove
By Material
By Home Hardware Types
- Handles
- Locking Handles
- Screws
- Sliding Doors
- Window Balances
- Window Hardware
- Window Locks
- Window Rollers
- more...
By Home Hardware Features
By Keyword
Best Seller | This is a right-hand operator, as viewed from the inside of the window looking out. It can be used on either awning or louver-type windows and is a side mount operator. | Prime-Line Right Hand RV Window Slant Sill Operator in Gray | 5.4 H x 3.75 W x... more | go to store |
This is a 4 in. satin chrome wire pull. Constructed of cold rolled steel C-shaped wire pull. Gives a brilliant professional look that will not attract dust and inhibits rust. Mountable to any flat surface. 4-5/16in. overall length with mounting holes 4... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It is 3/4 in. wide with a 27/32 in. flare, 1-5/8 in. tall and 1-1/2 in. long (not including the inner roller housing). It is rear adjusting... more | go to store |
This is an F-tab patio door roller assembly with a 1-1/4 in. concave ball bearing roller that replaces the Old Style design. Used on Sun Valley, Fullview, Glasco and a variety of other sliding patio door manufacturers. When the corner screw passes... more | go to store |
This is a sliding patio door keeper. It is made of heavy gauge stamped steel that is zinc plated, with 3/4 in. mounting holes on center. The vertical slots to allow easy adjustment. Also features a 3/8 in. hook offset. | Prime-Line Stamped Steel,... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This Arcadia style roller assembly... more | go to store |
This sliding window roller assembly is constructed from steel. It features a center grooved ball bearing roller that comes attached to a nylon housing. This style of roller assembly is used by a variety of window manufacturers. | Prime-Line Sliding... more | go to store |
This casement window operator is a right-handed, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the Prime-Line part H... more | go to store |
This is a deadbolt strike that is 4-7/8 in. in length x 1-1/8 in. in width that is steel construction with a brass plated finish. This includes (2) 1 in. screws, (2) 3 in. length screws, for residential applications. This security deadbolt strike is... more | go to store |
Prime-Line Storm Door Panel Clips in Gray | 5.4 H x 3.75 W x 0.45 D in | Wayfair PL 7959 These are extruded aluminum clips used to attach storm windows or screen panels to storm door frames with aluminum knurled head thumbscrews. | Prime-Line Storm Door Panel Clips in Gray | 5.4 H x 3.75 W x 0.45 D in | Wayfair more | go to store |
This sliding patio door roller assembly is constructed from steel. It features a 1 In. ball bearing wheel with an adjustable steel housing. This type of roller assembly is quick and easy to install. | Prime-Line Single 1-1/8 in. Steel Ball Bearing... more | go to store |
This is a diecast unique back that is used on Art Door patio doors. The 1-11/16 in. diameter by 7/16 in. wide roller is wider than the average roller. It is installed in a stamped steel bracket that is then installed onto the diecast housing. The... more | go to store |
This sliding screen door roller assembly fits onto the spring-loaded arm of a Columbia corner insert. The roller housing is stamped steel with a 1 in. steel ball bearing roller installed. These rollers are a replacement roller for the discontinued... more | go to store |
This is a sliding window in a black plastic housing with a flat-edged stainless steel ball-bearing roller. Features a stainless steel roller insert carrier. | Prime-Line Sliding Window Roller, 9/16 in. Stainless Steel, Ball Bearing Roller in Black |... more | go to store |
This step drill is constructed of hardened steel and features two diameters in one, for specifically for use when installing aluminum screen plunger bolts. It is used to drill 2 different diameter holes in one single pass for installation of screen... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door roller... more | go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted... more | go to store |
This is a heavy-duty pneumatic storm door closer for heavy weight wood or aluminum outswinging doors. It has a 1-1/2 in. barrel that is 10-3/8 in. long in an aluminum finish. It comes complete with mounting brackets and attaching hardware. It has... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This spring-loaded style sliding... more | go to store |
This is an unique back diecast patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used on Crossly doors. It's unique diecast housing is 11/16 in. stepping down to 9/16 in. wide, 1-1/8 in. tall and 2-5/16 in. long with a flare... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This high-tension steel spring... more | go to store |
This is a U-back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting... more | go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted... more | go to store |
This Door Strike Reinforcing Kit by Prime-Line Products is constructed of solid brass and comes in a beautiful, corrosion-resistant, polished brass finish. This two-piece security strike kit allows for hole center flexibility in securing combination... more | go to store |
This is a sliding door cylinder lock. Dimensions are 1-1/4 in. the tail is 1-7/8 in. It has a chrome faced 5 pin tumbler lock with 2 keys included. The lock body is solid brass construction with a hardened break-away tailpiece. Used to replace damaged... more | go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. | Prime-Line Chain Door... more | go to store |
This sliding window pin lock is constructed of steel and comes in a chrome-plated finish. The shortest lock pin manufactured by Prime-Line Products, it is designed to fit on older style, metal framed windows; usually of single pane glass with very thin... more | go to store |
This mortise hole cover is has a gray painted heavy-gauge steel design. It’s used to cover the mortise hole on the edge of your doors. The plate measures 1-1/8 In. x 2-1/4 In. and should be used on appropriate sized holes. Size: 4.75" H x 4" W x 0.32"... more | go to store |
These flush black plastic clips are used to secure window screens, storm windows, and storm door panels. | Prime-Line Flush Screen Clips w/ Screws, Plastic in Black | 5.4 H x 3.75 W x 0.7 D in | Wayfair more | go to store |
This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This rocker style spring tension... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door assembly... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more | go to store |
These rosettes are constructed from steel and come plated in brass. The 2-1/4 in. diameter rosettes have 1-3/4 in. hole centers. For old style passage locks; fits standard knobs. Easily mounts to your door with included screws. Note: these rosettes... more | go to store |
This low-profile, folding crank handle is constructed of diecast. It features a folding arm designed to avoid interference of window blinds and coverings. Besides the typical set screw, this crank handle also includes an aluminum insert allowing the... more | go to store |
These are plastic clips used to secure window screens, storm windows, and storm door panels. Accepts a #10 screw. | Prime-Line 1/16 in. Screen Clips w/ Screws Plastic in Gray | 5.4 H x 3.75 W x 0.65 D in | Wayfair more | go to store |
This nylon-constructed guide bracket houses a 5/16 in. Flat-edged brass roller. The nylon housing holds this roller into the bottom of your rail. Used on Elco/Century windows. Easy to install with a few simple tools in a few minutes. Installation of... more | go to store |
This is a K-tab patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4... more | go to store |
Ads related to white 24 x 0 375