You're in Home Hardware
See Matches in:
Narrow Search Results
Price Range
By Seller
By Material
By Home Hardware Types
By Home Hardware Features
By Keyword
Best Seller | CRL HR2SPSA Satin Anodized Aluminum Manhattan Series Post Mounted Hand Rail Bracket This CRL Manhattan Series Post Mounted Hand Rail Bracket is available in several architectural finishes for 1-1/2 1.9 or 2 (38 48.3 or 50.8 mm) diameter hand railing tubing. Bar angle and railing bracket angle adjust. Most shipping weights are... more | go to store |
CRL D990A14C Satin Anodized 14 Center Design Series Partition Post Create partitions or dividers in a space with this impressive Partition Post. It has been used for years in offices banks and restaurants. This partition post has a slim line profile and features a stylish matte black finish. It comes with an... more | go to store |
CRL S710A72 Satin Anodized 72 Security Anti-Lift Track Assembly CRL supplies Security Anti-Lift Aluminum Extrusions for the fabrication of Sliding Track Assemblies used in display showcases. They incorporate a design that prevents lift-out an extra measure of security when used with typical Upper Channel and... more | $157.16 $140.84 go to store |
CRL L902A Satin Anodized Aluminum 1/4 L-Bar Extrusion 144 Stock Length CRL L-Bar is an all purpose extrusion. Use it as an edge protector on complete mirror door installations or on wall mirrors where a lower lip is not required. Also good as an edge protector for glass tops. 1/4 (6 mm) lip is available in seven popular... more | go to store |
CRL Blumcraft BCSP1VASA Satin Anodized Vertical Adjustable Hand Rail Corner Splice This CRL Blumcraft® Vertical Adjustable Splice Connector are used to splice together mitered corners of Blumcraft hand rails. These spice connectors slip inside the bottom channel then the four set screws are tighten to join the two mitered pieces... more | go to store |
These Track Assemblies are smooth operating and will provide years of reliable service. CRL s Low Profile Track Assembly available in three popular pre-cut lengths is the most efficient way to purchase a track system for your pass-thru since it... more | go to store |
CRL UCECSA Satin Anodized End Cap with Screws Our CRL End Caps with Screws are used to finish the installation of CRL U-Channels with Roll-In Top Load Gasket. Several finishes match the finishes of our CRL Sidelite Rails. Most shipping weights are approximate and have not been verified. If the... more | go to store |
CRL D992A36LHCE Satin Anodized 36 Left Hand Closed End Standard Partition Post These CRL D992 Standard Partition Posts are available in many stock configurations - ends centers corners 3-way 4-way and in some finishes a 45 degree center; and also available with 135 degree angles (on special order only). All D992 posts have a... more | go to store |
CRL D594A Satin Anodized D594 Aluminum Lower Track 144 Stock Length This CRL Double Lower Track has side walls that prevent wheel assemblies from slipping off track. Eliminates awkward inserts and speeds installation. Use as an alternative to D602 Flat Lower Track. CRL Aluminum Extrusions and Accessories allow you to... more | $59.61 $49.55 go to store |
By using CRL Design Series Counter Partition Posts the top glass shelf can be continuously supported by as many brackets as desired. No strips plates or bars on top of the glass therefore no drilling is required nor is it necessary to splice shelves on... more | go to store |
CRL DV749A Satin Anodized 3/8 Aluminum U-Channel 144 Stock Length This CRL 3/8 Single U-Channel is a versatile aluminum extrusion profile which can be adapted to many different design applications. Used for any application where edge protection or decorative trim is a requirement. SPECIFICATIONS: Material: 6063-T5... more | $49.80 $42.09 go to store |
CRL SREC10SSA34 Satin Anodized 10 Square End Cap for Sidelite Rail - 3/4 Glass CRL End Caps are used to finish your installation when using CRL Sidelite Rails. Each End Cap matches the finish of our Sidelite and Door Rails perfectly. Attaches with provided matched finish machine screw. Our policy for Quick Pick products is as... more | go to store |
CRL 322A48 Satin Anodized 48 Aluminum Wall Standard CRL Aluminum Standards are available in two styles. The 22 Series Mirror Standard is T Shaped and fits between two mirror panels to cover the edges and secure them to the wall. The 322 Series Wall Standard simply secures to the wall. Five finishes and... more | $45.95 $37.81 go to store |
CRL D606A Satin Anodized Aluminum Single Jamb with Sponge Rubber Lining 144 Stock Length CRL Aluminum Single Jamb with Sponge Rubber Lining provides protection for the edge of sliding glass panels. This extrusion is most commonly used when a single vertical jamb is required. The sponge rubber insert acts as a cushion so there is no... more | go to store |
CRL Blumcraft WBNGSA Pacific Series Satin Anodized Aluminum Glass Mounted Hand Rail Bracket CRL Blumcraft® Pacific Series Glass Mounted Hand Rail Brackets are used with CRL Blumcraft® s 537 572 576 580 583 and 597 slotted hand rails only. Designed for 1/2 to 3/4 (12 to 19 mm) glass thickness. Most shipping weights are approximate and have... more | go to store |
CRL D995AC Satin Anodized 18 High Center Design Series Partition Post with a 12 Deep Top Shelf By using CRL Design Series Counter Partition Posts the top glass shelf can be continuously supported by as many brackets as desired. No strips plates or bars on top of the glass therefore no drilling is required nor is it necessary to splice shelves on... more | go to store |
CRL LK610A Satin Anodized Aluminum LK610 H-Bar 144 Stock Length CRL Aluminum H-Bar is used most often for showcase sliding doors. Designed for use with 3/16 7/32 and 1/4 (5 5.5 and 6 mm) materials. 3/16 and 7/32 (5 and 5.5 mm) materials require the use of DV765 Vinyl for proper fit. You can use either the D650... more | go to store |
CRL NH236SA Satin Anodized 36 Stock Size Narrow Header CRL Single and Double Door Narrow Headers are fabricated with our CRL860 Walking Beam Pivots installed. Narrow Headers are carried in two stock sizes and custom sizes can be special ordered. Snap-In Cover Plates allow for easy installation of the... more | go to store |
CRL D3316A Satin Anodized Aluminum 3/16 J-Channel 144 Stock Length CRL 3/16 J-Channel is used for 3/16 (4.8 mm) thick mirrors and other materials. Each stock length is individually polywrapped to protect against scratching. Product Warning: 12 (3.66 m) stock lengths must ship common carrier unless specifically cut for... more | go to store |
CRL HBFP1SA Satin Anodized Optional Flat Hand Rail Adaptor Plate for Hand Railing Bracket This CRL Flat Hand Rail Adapter Plate for Hand Railing Brackets is designed to convert our railing brackets so it can work with our 1-1/2 1.9 or 2 (38 48.3 or 51 mm) square hand rail tubing. Each plate comes with attachment screw. Most shipping weights... more | go to store |
CRL CRL50EC2 502S2 Series Satin Anodized Wall Mount Kit End Cap CRL50/51 Series Top Track End Caps give the system a clean finished look and stabilize the Track Covers. They are made of aluminum with a satin anodized finish. Handed Caps come two per set. Product Warning: STRUCTURAL DISCLAIMER - All customers who in... more | go to store |
CRL s 12 (3.66 m) Deluxe Rolling Track Assemblies provide three options for Upper Track Extrusions depending on your design preference. This system is ideally suited where frequency of use requires ease of operation and years of reliable service. These... more | go to store |
CRL 6435000 Satin Anodized 146 Mounting Base Extrusion Our line of Sculptured Series Aluminum Partition Posts can also be custom made to order. Square Aluminum Extrusion is available in Satin Anodized Buffed Brite Anodized and Duranodic Bronze finishes. Recessed channel holds 7/32 to 1/4 (5.5 to 6 mm)... more | go to store |
CRL D990A123W Satin Anodized 12 3-Way Design Series Partition Post Create partitions or dividers in a space with this impressive Partition Post. It has been used for years in offices banks and restaurants. This partition post has a slim line profile and features a stylish matte black finish. It comes with an... more | go to store |
CRL DR2SSA12SL Satin Anodized 1/2 Glass Low Profile Square Door Rail With Lock - 35-3/4 Length Our CRL Low Profile Door Rail measures only 2-5/16 (59 mm) tall by 1-1/2 (38 mm) wide and yet it incorporates our patented Wedge-Lock® Glass Securing System (U.S. Patents 6 434 905 and 6 912 818 B2 Canadian Patent 2 419 706 and European Patent No. EP... more | FREE shipping go to store |
CRL SDCD1212A Satin Anodized 1/2 Fixed Panel Shower Door Deep U-Channel - 144 This 3/4 (19 mm) tall profile CRL Deep U-Channel is used for securing fixed panels of glass to the wall ceiling or floor. Widths suitable for 3/8 and 1/2 (10 and 12 mm) thick glass are available and are individually wrapped to protect the finish. The... more | $62.67 $52.64 go to store |
CRL 725A12 Satin Anodized Optional Spacer Kit for 725A Half-Round Ticket Window CRL Optional Spacer Kits are used when installing our Half-Round Ticket Windows in glazing thicker than 1/4 (6 mm). Half Round Ticket Windows sold separately. Most shipping weights are approximate and have not been verified. If the exact weight is... more | go to store |
CRL CRL3960A 285 Series Satin Anodized Top Track - 118 CRL285 Series Top Tracks are made of aluminum with a satin anodized finish. They come pre-drilled for 3/16 (4.8 mm) fasteners (not included) at 8 (203 mm) centers. Optional snap-on Track Covers and Fixed Panel Adaptors must be ordered separately.... more | go to store |
CRL 6406424 Satin Anodized 24 Center Aluminum Counter Post Our line of CRL Sculptured Series Aluminum Partition Posts can also be custom made to order. Square Aluminum Extrusion is available in Satin Anodized Buffed Brite Anodized and Duranodic Bronze finishes. Recessed channel holds 7/32 to 1/4 (5.5 to 6 mm)... more | go to store |
This CRL Masteroll Enclosed Double Overhead Track is designed to accept D28A Hangers using D679 Rollers. This extrusion is extremely versatile and can be used for both commercial and residential applications. Product Warning: Stock lengths must ship... more | go to store |
CRL DRSEC4SSA Satin Anodized 4 Split Square End Cap This CRL 4 Square End Cap for Wedge-Lock® Corner Patch Rails is split and intended to finish the installation of the Corner Patch Rail when the glass extends from the bottom of the Patch. Each End Cap (consisting of both sides) matches the finish of... more | go to store |
CRL D990A18E Satin Anodized 18 End Design Series Partition Post CRL Design Series Partition Posts are very popular available in the standard stock sizes and are ready for immediate delivery. These Posts have been used for years in banks offices and restaurants. A slim line profile and easy-to-install Mounting Base... more | go to store |
CRL 6406418 Satin Anodized 18 Center Aluminum Counter Post Our line of CRL Sculptured Series Aluminum Partition Posts can also be custom made to order. Square Aluminum Extrusion is available in Satin Anodized Buffed Brite Anodized and Duranodic Bronze finishes. Recessed channel holds 7/32 to 1/4 (5.5 to 6 mm)... more | go to store |
CRL A19WR Satin Anodized ACRS Wall Return The CRL ACRS Wall Return is made from 1-1/2 Schedule 40 Pipe and is used to make a smooth radius return back to a wall when terminating a hand rail. It attaches to 1-1/2 Schedule 40 Aluminum Pipe using Cat. No. A19SC Splice Coupling giving you a clean... more | go to store |
CRL DREC10SSA Satin Anodized End Cap for 10 Square 1/2 Glass Wedge-Lock Door Rail This CRL End Cap for Wedge-Lock® Door Rails matches our door rail finishes and is commonly used to replace a missing or damaged end cap. Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to... more | go to store |
CRL DRWSAS Satin Anodized Pile Weatherstrip for Single Door Rail - Set of 2 To help reduce the infiltration of air and water we offer CRL Pile Weatherstrips for Door Rails. Pile Weatherstrips attach without modifications to the specially designed recess on the inside of the Door Rail using the Very Hi-Bond Tape that is already... more | go to store |
CRL L502A Satin Anodized Aluminum 5/8 Face L-Bar Extrusion 144 Stock Length This CRL Aluminum 5/8 L-Bar Extrusion can be used as an L-Bar or J-Channel. The 5/8 (16 mm) face height matches the CRL Deep Nose J-Channel. Available in several different finishes this extrusion is extremely versatile for use in most mirror... more | go to store |
CRL D3050A Satin Anodized Showcase Corner This CRL Showcase Corner is designed to work with all CRL D3000 series extrusions. Each corner is furnished with four screws which when tightened lock the corner into the horizontal and vertical showcase extrusions. It holds extrusions firmly and... more | go to store |
Ads related to crl f40sksa satin anodized replacement