Home Hardware › on a 3 1

KEN FORGING K2023-3-ZN Machinery Eye Bolt With Shoulder, 3/8"-16, 3 in Shank, 1

Machinery Eye Bolt, System of Measurement Inch, Eyebolt Type Lift with Shoulder, Material Steel, Finish Zinc Plated, Thread Size 3/8 In.-16, Thread Length 3 in, Shank Dia. 3/8 in, Shank Length 3 in, Shoulder Dia. 0.62 in to 0.69 in, Shoulder Length... more

BUYERS PRODUCTS HBF12 Vent Plug, 3/4 NPT Thread Size, 1.625 H, 3 1/4 in Top Cap

Vent Plug,3/4 NPT,1-5/8 In •Provides free flow of clean air into hydraulic fluid, oil, chemical, and coolant tanks or reservoirs. •Large, oil-resistant filter elements dirt and dust particles as small as 40 micron. more

ZORO SELECT 4PA77 1 3/4 in W x 3 1/2 in H Satin Chrome Spring Hinge

Spring Hinge, Steel Material, Satin Chrome Finish, With Holes, 3 Holes per Leaf, No Ligature Resistant, 270 Degrees Range of Motion, Orientation Non Handed, 3 1/2 in Door Leaf Height, 3 1/2 in Frame Leaf Height, 1 3/4 in Door Leaf Width, 1 3/4 in Frame... more

KEN FORGING K2023-3 Machinery Eye Bolt With Shoulder, 3/8"-16, 3 in Shank, 1 in

Machinery Eye Bolt, System of Measurement Inch, Eyebolt Type Lift with Shoulder, Material Steel, Finish Plain, Thread Size 3/8 In.-16, Thread Length 3 in, Shank Dia. 3/8 in, Shank Length 3 in, Shoulder Dia. 0.62 in to 0.69 in, Shoulder Length 5/32 in,... more

POWERDRIVE P1 X 1 3/16 Split Taper Bushing,Series P1,1-3/16 In

Split Taper Bushing, Bushing Type Split Taper, Bore Bushing Series P1, Bore Diameter 1 3/16 in, Length 1.938 in, Bolt Circle Diameter 2.44 in, Bolt Size Not Applicable, System of Measurement Inch, Bushing Diameter 1.938 in, Fastener Tightening Torque... more

ZORO SELECT 4PA91 1 3/4 in W x 3 1/2 in H Satin Chrome Spring Hinge

Spring Hinge, Steel Material, Satin Chrome Finish, With Holes, 3 Holes per Leaf, No Ligature Resistant, 270 Degrees Range of Motion, Orientation Non Handed, 3 1/2 in Door Leaf Height, 3 1/2 in Frame Leaf Height, 1 3/4 in Door Leaf Width, 1 3/4 in Frame... more

ZORO SELECT U17243.037.0200 Round U-Bolt, 3/8"-16, 3 1/8 in Inside Ht, 2 1/2 in

Standard U-Bolt, Standard U-Bolt, Steel, Finish Zinc Plated, Thread Size 3/8 In.-16, Thread Length 1 1/4 in, Inside Length 3 1/8 in, Inside Width 2 1/2 in, Pipe Size (In.) 2 in, Characteristics ASME B18.2.2- ASTM A563, Grade A, Includes (2) Nuts,... more

ZORO SELECT U17242.037.0200 Round U-Bolt, 3/8"-16, 3 1/8 in Inside Ht, 2 1/2 in

Standard U-Bolt, Standard U-Bolt, Steel, Finish Black Oxide, Thread Size 3/8 In.-16, Thread Length 1 1/4 in, Inside Length 3 1/8 in, Inside Width 2 1/2 in, Pipe Size (In.) 2 in, Characteristics ASME B18.2.2- ASTM A563, Grade A, Includes (2) Nuts,... more

ZORO SELECT Z5196 Arch Barrel, 1/4"-20, 1 3/16 in Brl Lg, 3/8 in Brl Dia, 316

Architectural Sex Bolt, Material 316 Stainless Steel, Barrel Head Style Truss, Screw Head Style Flat, Thread Size 1/4 In.-20, Barrel Length 1 3/16 in, Barrel Diameter 3/8 in, Barrel Thread Depth 3/4 in, Barrel Drive Type No Drive, Screw Drive Style... more

AMPCO SAFETY TOOLS W-1 Flange Wedge,Nonsparking,1/4 x 3 1/4 In

The AMPCO W-1 Flange Wedge is the tool you will want to have on hand when working with flanges. It has a non-sparking, non-magnetic and corrosion resistant design that makes it ideal for use in explosive atmospheres. Made of high strength nickel... more

S & W SSW-1 Level Mount,Swivel Stud,3/8-16,1-1/4 in.

Leveling Mount, Leveling Mount Type Swiveling Stud, Base Dia. 1 1/4 in, Height 2.88 in, Load Capacity 3750 lb, Thread Size 3/8 In.-16, Construction Stainless Steel, Hex 5/8 in, Includes Locking Nut, Bolt Length 2 in, Finish Stainless Steel, Base... more

ZORO SELECT U17567.025.0050 Round U-Bolt, 1/4"-20, 1 3/4 in Inside Ht, 1 in

Standard U-Bolt, Standard U-Bolt, 304 Stainless Steel, Finish Plain, Thread Size 1/4 In.-20, Thread Length 1 in, Inside Length 1 3/4 in, Inside Width 1 in, Pipe Size (In.) 1/2 in, Characteristics Has Coarse Rolled Threads, for Steel or Wrought Iron... more

S & W NSSW-1 Level Mount,Swivel Stud,3/8-16,1-1/4 in.

Leveling Mount, Leveling Mount Type Swiveling Stud, Base Dia. 1 1/4 in, Height 3 in, Load Capacity 2800 lb, Thread Size 3/8 In.-16, Construction Stainless Steel, Hex 5/8 in, Includes Locking Nut, Bolt Length 2 in, Finish Stainless Steel, Base Material... more

ZORO SELECT 3HDY8 Hex Nut, 1-3/4"-5, Steel, Grade 8, Black Oxide, 1-1/2 in Ht

Hex Nut, Hex Type Standard Hex, Finish Black Oxide, Material Grade/Class Grade 8, Material Steel, Thread Size 1 3/4 In.-5, Hex Width 2 5/8 in, Hex Height 1 1/2 in, Manufacturer Location Globally Sourced, Dimensional Standards ASME B18.2.2, System of... more

ZORO SELECT U17243.037.0100 Round U-Bolt, 3/8"-16, 2 1/2 in Inside Ht, 1 1/2 in

Standard U-Bolt, Standard U-Bolt, Steel, Finish Zinc Plated, Thread Size 3/8 In.-16, Thread Length 1 1/4 in, Inside Length 2 1/2 in, Inside Width 1 1/2 in, Pipe Size (In.) 1 in, Characteristics ASME B18.2.2- ASTM A563, Grade A, Includes (2) Nuts,... more

DEWALT DFM12702 Ultracon Masonry Screw, 3/16" Dia., Hex, 1 3/4 in L, Steel Zinc

Concrete Anchor Screw, Anchor Diameter 3/16 in, Screw Size 1 3/4 in, Overall Length 1 3/4 in, Thread Length 1 1/2 in, Head Type Hex, Head Width 0.25 in, Head Height 0.11 in, Drive Type External Hex, Material Steel, Finish Stalgard, Material Grade/Class... more

ZORO SELECT 205821BG Coupling Nut, 3/8"-16, Steel, Grade 8, Zinc Plated, 1-3/4

Coupling Nut, Material Grade/Class Grade 8, Material Steel, Finish Zinc Plated, Thread Size 3/8 In.-16, Thread Style Fully Threaded, Hex Width 5/8 in, Overall Length 1 3/4 in, Dimensional Standards ASME B18.2.2, RoHS Compliant, Material Quality... more

MKT FASTENING 2612334 SUP-R-STUD + Wedge Anchor, 1/2" Dia., 3-3/4" L, Steel

Wedge Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Thread Size 1/2 In.-13, Overall Length 3 3/4 in, Thread Length 2 1/2 in, Eyelet Hole Size Not Applicable, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, Compatible... more

DEWALT DFM12742 Ultracon Masonry Screw, 3/16" Dia., Flat, 1 3/4 in L, Steel

Concrete Anchor Screw, Anchor Diameter 3/16 in, Screw Size 1 3/4 in, Overall Length 1 3/4 in, Thread Length 1 1/2 in, Head Type Flat, Head Width Not Applicable, Head Diameter 0.38 in, Head Height 0.14 in, Drive Type Phillips, Material Steel, Finish... more

SKF 13876 Shaft Seal, 1-3/8 x 2-9/16 x 3/8", CRWA1, NBR

Rotary Shaft Seal, Design Code CRWA1, Inside Diameter 1.375 in, Outside Diameter 2.562 in, Overall Width 0.375 in, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 10 psi, Number of Lips 2, Spring Material Carbon Steel, System... more

ZORO SELECT U51300.037.0175 3/8"-16 x 1-3/4 in Phillips Flat Machine Screw,

Machine Screw, Head Type Flat, Material 18-8 Stainless Steel, Finish Plain, Drive Phillips, Thread Size 3/8 In.-16, Fastener Length 1 3/4 in, Head Width 0.717 in, Head Height 0.23 in, Drive Size #4, Tensile Strength 60,000 psi, Dimensional Standards... more

INNOVATIVE COMPONENTS GL6X3500T----01 T Handle Lock Pin,3-1/2,3/8,Steel

Quick Release Pin, Push Button, Zinc, Steel, Shank Dia. 3/8 in more

ZORO SELECT U08307.037.0350 Carriage Bolt,3/8-16,3-1/2 in.,PK25

Carriage Bolt, Inch, Neck Type Square, Basic Material Steel, Material Grade Grade A, Fastener Finish Hot Dipped Galvanized, Dia./Thread Size 3/8 In.-16, Fastener Length 3 1/2 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse),... more

ZORO SELECT 2MDH8 Universal Latch Guard, Aluminum, Steel, 11-3/4"L x 3-1/2"W

Universal Latch Guard, Length 11 3/4 in, Width 3 1/2 in, Aluminum Finish, Material Steel, For Use With Door Type Out-Opening Doors, Hardware Included, For Use With Fits Deadbolts, And Door Locks Up To 3 1/2 in dia more

ZORO SELECT U07111.100.0300 Shoulder Screw, 3/4"-10 Thr Sz, 1 in Thr Lg, 3 in

Shoulder Screw, Shoulder Screw Type Standard Shoulder Screw, Head Type Standard, Drive Type Socket, Material Alloy Steel, Finish Plain, System of Measurement Inch, Thread Size 3/4 In.-10, Minimum Thread Length 1 in, Shoulder Length 3 in, Shoulder... more

ZORO SELECT U17244.031.0200 Round U-Bolt, 5/16"-18, 3 3/16 in Inside Ht, 2 1/2

Standard U-Bolt, Standard U-Bolt, Steel, Finish Hot Dipped Galvanized, Thread Size 5/16 In.-18, Thread Length 1 in, Inside Length 3 3/16 in, Inside Width 2 1/2 in, Pipe Size (In.) 2 in, Characteristics ASME B18.2.2- ASTM A563 Grade A, Includes (2)... more

ZORO SELECT U17277.050.0300 Round U-Bolt, 1/2"-13, 5 3/4 in Inside Ht, 3 9/16

Standard U-Bolt, Standard U-Bolt, 304 Stainless Steel, Finish Plain, Thread Size 1/2 In.-13, Thread Length 3 in, Inside Length 5 3/4 in, Inside Width 3 9/16 in, Pipe Size (In.) 3 in, Characteristics Has Coarse Rolled Threads, for Steel or Wrought Iron... more

ZORO SELECT U17272.050.0300 Round U-Bolt, 1/2"-13, 5 3/4 in Inside Ht, 3 9/16

Standard U-Bolt, Standard U-Bolt, Steel, Finish Plain, Thread Size 1/2 In.-13, Thread Length 3 in, Inside Length 5 3/4 in, Inside Width 3 9/16 in, Pipe Size (In.) 3 in, Characteristics ASME B18.2.2- ASTM A563, Grade A, Includes (4) Nuts, Package... more

KEN FORGING K2025-3 Machinery Eye Bolt With Shoulder, 1/2"-13, 3 in Shank,

Machinery Eye Bolt, System of Measurement Inch, Eyebolt Type Lift with Shoulder, Material Steel, Finish Plain, Thread Size 1/2 In.-13, Thread Length 3 in, Shank Dia. 1/2 in, Shank Length 3 in, Shoulder Dia. 0.88 in to 0.94 in, Shoulder Length 7/32 in,... more

IVES 347B10 Ball Catch,Satin,3.5 lb., 1-3/8 in.L

Dual Adjustable Ball Catch, Ball, Pull, Adjustable No, Non-locking, Catch/Latch Material Brass, Catch/Latch Finish Satin Brass, Catch/Latch Height 1 3/8 in, Catch/Latch Width 1 in, Catch/Latch Depth 1/2 in, Pull Force 3.5 lb more

ZORO SELECT WWG-WKC-00E Woodruff Key, 3/8 x 1-1/4 in Key Size, E SAE Number,

Woodruff Key, Length 1 1/4 in, Length Tolerance +0.000/-0.010 in, Material Steel, Material Grade/Class Grade 1035, Finish Plain, Height 0.547 in, Width 0.375 in, Width Tolerance +0.000/-0.001 in, Rockwell Hardness B80, Tensile Strength 72,000 psi, Made... more

ZORO SELECT U16000.075.0125 Machinery Eye Bolt With Shoulder, 3/4"-10, 1-1/4 in

Machinery Eye Bolt, System of Measurement Inch, Eyebolt Type With Shoulder, Material Steel, Finish Plain, Thread Size 3/4 In.-10, Thread Length 1 1/4 in, Shank Dia. 3/4 in, Shank Length 1 1/4 in, Shoulder Dia. 1.12 in to 1.25 in, Shoulder Length 9/32... more

ZORO SELECT U17380.000.0350 S Hook,1/2 in. Opening,3-1/2 in.,PK10

S Hook, Material Steel, Finish Zinc, Wire Dia. 0.373 In., Hook Eye Inside H 1 In., Hook Eye Inside W 1 In., Opening Size 1/2 In., Width 1-3/4 In., Overall Length 3-1/2 In., Working Load Limit 160 lb., Package Quantity 10 more

DEWALT PFM2231000 Vertical Vertical Rod Hanger, Steel, 1/4 in Size, 1-3/4" L,

Vertical Rod Hanger, System of Measurement Inch, Mount Type Vertical, Screw Size 1/4 in, Overall Length 1 3/4 in, Material Steel, Finish Zinc Plated, Drive Type Socket, Compatible Material Steel, Compatible Rod Thread Size 1/4 In.-20, Drill Bit Size... more

ZORO SELECT U16000.075.0150 Machinery Eye Bolt With Shoulder, 3/4"-10, 1-1/2 in

Machinery Eye Bolt, System of Measurement Inch, Eyebolt Type With Shoulder, Material Steel, Finish Plain, Thread Size 3/4 In.-10, Thread Length 1 1/2 in, Shank Dia. 3/4 in, Shank Length 1 1/2 in, Shoulder Dia. 1.12 in to 1.25 in, Shoulder Length 9/32... more

80/20 40-2085 1 1/2 in W x 3 in H Anodized Aluminum Door and Butt Hinge

Butt Hinge, Aluminum, Anodized Aluminum Finish, 30 lb Load Capacity, 2 Holes per Leaf, No Ligature Resistant, 160 Degrees Range of Motion, Orientation Non Handed, 3 in Door Leaf Height, 3 in Frame Leaf Height, 1 1/2 in Door Leaf Width, 1 1/2 in Frame... more

ZORO SELECT WWG-WKC-00G Woodruff Key, 3/8 x 1-1/2 in Key Size, G SAE Number,

Woodruff Key, Length 1 1/2 in, Length Tolerance +0.000/-0.010 in, Material Steel, Material Grade/Class Grade 1035, Finish Plain, Height 0.641 in, Width 0.375 in, Width Tolerance +0.000/-0.001 in, Rockwell Hardness B80, Tensile Strength 72,000 psi, Made... more

ZORO SELECT 1951PK Blind Rivet, Dome Head, 1/4 in Dia., 1-3/16 in L, Aluminum

Blind Rivet, System of Measurement Inch, Body Length 1 3/16 in, Shank Diameter 0.25 in, Product Type Blind Rivet, Body Material Aluminum, Head Type Dome, Head Diameter 11/16 in, Maximum Hole Diameter 0.25 in, Minimum Material Thickness 3/16 in, Maximum... more