Home Hardware › Nylon › Sliding › libbey 97052 4 1 8

Prime-Line N 6840 Flat Closet Door Roller for Sliding Doors Nylon 7/8 In. 2-Pk. - Quantity 6

2 Pack Adjustable top hung side mounted bracket with a 3/8 in. offset and 7/8 in. flat nylon roller used on the back of a sliding door panel. It fits 3/4 in. to 1-3/8 in. thick doors. Used by Johnson Hardware. more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Tandem Roller Assembly (Single Pack) in Gray | 7.4 H x 3.8 W x 1.05 D in | Wayfair D 1920

This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other manufacturers, primarily on vinyl patio doors. The housing is... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly, for Premiere (Single Pack) | 5.35 H x 3.8 W x 1.15 D in | Wayfair D 1752

This is a unique back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The unique housing is 11/16 in. wide and 1-3/8 in. tall. It is rear adjusting with a set of tabs or ears that insert into slots in the door's bottom... more

Prime-Line Keyless Sliding Window Lock Hardware, Nylon in Brown | 6.85 H x 4.8 W x 1.1 D in | Wayfair TH 23058

This is a right-hand cam style casement locking handle that rotates 90 degrees to lock or unlock the sash. It is diecast construction with a baked enamel bronze finish. The latch rotates over the keeper to tightly lock the sash against the... more

Prime Line N 6562 3-Pc. Bypass Sliding Closet Door Guide 3/4 In. High Adjustable Nylon 2-Pk. - Quantity 6

2 Pack 3-piece adjustable floor guide. Made of white nylon the guides at each end can be adjusted inward to accommodate doors 3/4 in.to 1-3/8 in. thick. Used by a variety of closet door manufacturers. The guides extend 3/4 in. from the floor. For... more

CRL B501 1 Nylon Sliding Screen Door Spring Tension Roller - pack of 2

This CRL Spring Tension Roller has a 4-3/8 (125.8 mm) heat-treated high-tension steel spring housing. The 1/4 (6.4 mm) wide nylon wheel has a center groove. Two roller assemblies with installation screws per package. Most shipping weights are... more

CRL B518 1 Nylon Sliding Screen Door Spring Tension Roller - pack of 2

This CRL Spring Tension Roller can be used as a top or bottom roller. It has a 1-7/8 (47.6 mm) steel housing with a high tension flat steel spring. The nylon wheel has a 1/4 (6 mm) center groove. Two roller assemblies per package. Most shipping weights... more

CRL G3015 7/16 Steel Sliding Window Flat Roller with Nylon Axle Pin for Premiere Windows

This CRL Replacement Roller and Axle Pin has a flat 1/8 x 7/16 (3 x 11 mm) steel roller. The nylon axle pin is 1/2 (13 mm) long with a 5/32 (4 mm) diameter. The unit is used on Premiere windows. Four rollers with axle pins per package. Most shipping... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly, for Premiere (Single Pack) | 5.4 H x 3.75 W x 0.65 D in | Wayfair D 1522

This is a unique back patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. The stamped steel housing is 11/16 in. wide and 1-3/8 in. tall. It is rear adjusting with a set of tabs or ears that insert into slots in the door's... more

Prime-Line 7/8 in. Nylon, Flat Closet Door Roller, for Sliding Doors in White/Yellow | 2.5 H x 1.75 W x 0.6 D in | Wayfair N 6840

This is an adjustable top hung, side mounted bracket with a 1/16 inch offset and 7/8 inch flat nylon roller used on the back of a sliding door panel. It fits 3/4 inch to 1-3/8 inch thick doors. Used by a variety of sliding closet or wardrobe doors. |... more