Home Hardware › Bolts › Flat › crown alloy 1 4 x

Square Head Set Screw Flat Point 3/4-10 X 2 Alloy Steel Case Hardened Black Oxide Full Thread (Quantity: 25) Coarse Thread 3/4 Inch Square Head Bolts Length: 2 Inch

Thread:Coarse / Full Thread / Case Hardened / Black Oxide Thread Diameter-Pitch:3/4-10 Length:2 inch Coarse Thread Black Oxide is not a protective finish and will rust if exposed to moisture. Stainless Steel material is recommended for environments... more

ZORO SELECT 1CFZ9 Square Neck Plow Bolt, 1"-8 Thrd Sz, 2 3/4 in L, Flat Head,

Inch, Plow Bolt, #3 Dome Head Type, Alloy Steel, Material Grade Grade 8, Plain Fastener Finish, Dia./Thread Size 1 In.-8, Fastener Length 2 3/4 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), Fastener Industry Standards SAE... more

ZORO SELECT 1CFX1 Square Neck Plow Bolt, 3/4"-10 Thrd Sz, 2 1/2 in L, Flat

Inch, Plow Bolt, #3 Dome Head Type, Alloy Steel, Material Grade Grade 8, Plain Fastener Finish, Dia./Thread Size 3/4 In.-10, Fastener Length 2 1/2 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), Fastener Industry Standards... more

ZORO SELECT 1CFR1 Square Neck Plow Bolt, 5/8"-11 Thrd Sz, 2 1/4 in L, Flat

Inch, Plow Bolt, #3 Dome Head Type, Alloy Steel, Material Grade Grade 8, Zinc Yellow Fastener Finish, Dia./Thread Size 5/8 In.-11, Fastener Length 2 1/4 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), Fastener Industry... more

Prime-Line Concealed Latch Knob Set w/Flat Tip Bolt, Cast Zamak, Chrome Plated (Single Pack) in Gray | 1.75 H x 4 W x 5.25 D in | Wayfair 658-7112

This knob set is constructed of zinc alloy (cast Zamak) and comes in a polished chrome-plated finish. It is designed for use with a concealed latching mechanism, it has an offset bolt with a flat tip, and it assembles easily with a push nut fastener.... more

Prime-Line Concealed ADA Latch w/Jumbo Lever Set, Flat Tip Bolt, Cast Zamak, Chrome (Single Pack) in Gray | 1.75 H x 4 W x 6 D in | Wayfair

It is designed for use with a concealed latching mechanism, it has a jumbo-sized lever, an offset bolt with a flat tip, and it assembles easily with a push nut fastener. This lever set has an outside diameter, and it features an overall with a flat,... more

M8 x 70mm Metric Phillips Flat Head Countersunk Bolts Machine Screws 4pcs - Silver Tone

Head Style: Flat Head; Material: 304 Stainless Steel; Package Content: 4 x Phillips Head Screw Product Name: Phillips Head Screw; Thread Size: M8 x 65mm(D*L); Weight: 94g Drive Type: Phillips; Main Color: Silver Tone Thread Pitch: 1.25mm; Total Length:… more

60 Pcs M2.5x4mm 316 Stainless Steel Flat Head Phillips Screws Bolts - Silver Tone

Head Style: Flat Head; Main Color: Silver Tone; Material: 316 Stainless Steel Package Content: 60(+/-2%) x Phillips Machine Screws; Product Name: Phillips Machine Screw; Thread Size: M2.5 x 2.5mm / 0.1" x 0.1"(D * L) Weight: 11g; Head Size: 4.6 x 1.5mm /… more

1 pc Zoro Select Square Neck Plow Bolt 5/8 -11 Thrd Sz 4 in L Flat Head Alloy Steel Plain 5 PK

Inch Plow Bolt #3 Dome Head Type Alloy Steel Material Grade Grade 8 Plain Fastener Finish Dia./Thread Size 5/8 In.-11 Fastener Length 4 in Fastener Thread Direction Right Hand Fastener Thread Type UNC (Coarse) Fastener Industry Standards SAE J-429 Head... more

1/4 -20 x 1-1/4 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 100 - by Fastener Depot LLC

Coarse Thread Superior Corrosion Resistance Hot Dipped Galvanized Finish Grade A Full Thread more

1/4 -20 x 1-1/4 Zinc Flat Countersunk Head Elevator Bolts (10 pcs.)

Diameter: 1/4 Length: 1-1/4 Material: Steel Finish: Zinc Head Style: Flat Countersunk Thread Size: 20 (Coarse) Type: Elevator Bolt Box of 10. These bolts have large flat heads and are commonly found in conveyor systems. more

1/4 -20 x 1-1/4 Zinc Slotted Flat Head Stove Bolts (25 pcs.)

Diameter: 1/4 Length: 1-1/4 Material: Steel Finish: Zinc Head Style: Flat (Slotted) Thread Size: 20 (Coarse) Thread Length: Full Type: Machine Screw Box of 25. A machine screw also called a stove bolt is generally a smaller fastener threaded the entire... more

Crown Bolt 21002 #10 x 1 Wood Screw Phillips Flat Head Steel Zinc Plated 100/Pack

Zinc Plated #10 X 1 in. Wood Screws Flat Head Phillips. #10 Body Diameter. 1 in. Fastener Length. Flat Head Phillips Drive. **This product is prohibited from shipping to California.** Lot of 1 more

M8-1.25 x 60mm Flat Head Socket Cap Screws Countersunk Bolts Alloy Steel Grade 10.9 Fully Threaded Allen Socket Drive 10 PCS

M8-1.25 x 60mm Flat Head Socket Cap Screws Countersunk Bolts Alloy Steel Grade 10.9 Fully Threaded Allen Socket Drive 10 PCS Product Specification With a low-profile countersunk head flat head socket cap screws are ideal for applications requiring a... more

1/4 -20 x 1-3/4 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 100 - by Fastener Depot LLC

Coarse Thread Superior Corrosion Resistance Hot Dipped Galvanized Finish Grade A Full Thread more

1/4 -20 x 2-1/4 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 100 - by Fastener Depot LLC

Coarse Thread Superior Corrosion Resistance Hot Dipped Galvanized Finish Grade A Full Thread more

V7652 Flat Head Carriage Bolts And Nuts In Zinc Plated 12 Pack 1/4 - 20 X 1-3/4

Use on wood or hole in steel prevents spinning during installation & tightening Tighten without being on both sides of the door Specifically used on wood or steel garage doors. more

V7652 Flat Head Carriage Bolts And Nuts In Zinc Plated 12 Pack 1/4 - 20 X 1-3/4

Use on wood or hole in steel prevents spinning during installation & tightening Tighten without being on both sides of the door Specifically used on wood or steel garage doors. more

1/4 -20 x 4-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 100 - by Fastener Depot LLC

Coarse Thread Superior Corrosion Resistance Hot Dipped Galvanized Finish Grade A Full Thread more

V7652 Flat Head Carriage Bolts And Nuts In Zinc Plated 12 Pack 1/4 - 20 X 1-3/4

Use on wood or hole in steel prevents spinning during installation & tightening Tighten without being on both sides of the door Specifically used on wood or steel garage doors. more

Bolt Dropper #4 x 1-1/4 Stainless Flat Head Phillips Wood Screw (100 pc) 18-8 (304)

The Bolt Dropper #4x1-1/4 Stainless Flat Head Phillips Wood Screw is a pack of 100 high-quality screws made from 18-8 (304) Stainless Steel one of the most corrosion-resistant metals available. These screws are designed for both indoor and outdoor use... more

V7652 Flat Head Carriage Bolts And Nuts In Zinc Plated 12 Pack 1/4 - 20 X 1-3/4

Use on wood or hole in steel prevents spinning during installation & tightening Tighten without being on both sides of the door Specifically used on wood or steel garage doors. more

Drag Specialties Countersunk Socket-Head Bolts 1/4 X 20 X 1/2 Flat DS192357

Replacement bolts for Drag Specialties� Countersunk Socket-Head Bolt Assortment (PART# DS192348)Made in the U.S.A. more

1/2 -13 x 1-1/4 Plain Grade 5 Steel Coarse Thread Flat Head Plow Bolts PBS5-161

Diameter: 1/2 Length: 1-1/4 Material: Steel Finish: Plain Head Style: Flat Thread Size: 13 (Coarse) Thread Length: Full Hardness: Grade 5 Type: Plow Bolt Application: Gang Plows|Road Graters|Scoop Shovels A plow bolt is similar to a carriage bolt... more

1/4 -20 x 1-1/2 Zinc Slotted Flat Head Stove Bolts (20 pcs.)

Diameter: 1/4 Length: 1-1/2 Material: Steel Finish: Zinc Head Style: Flat (Slotted) Thread Size: 20 (Coarse) Thread Length: Full Type: Machine Screw Box of 20. A machine screw also called a stove bolt is generally a smaller fastener threaded the entire... more

Flat Elevator Bolt 1/4-20 X 1-1/2 Flush Mount Zinc Plated

Thank you for your custom.Customer care is our top priority. Offer is subject to availability.We promise you won t regret buying it. Thread Diameter:1/4-20 Length:1-1/2 Finish:Zinc more

1/4 -20 x 1-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Grade A Full Thread Quantity 100 - by HElectQRIN

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

1/4 -20 x 1-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 100 - by Fastener Depot LLC

Coarse Thread Superior Corrosion Resistance Hot Dipped Galvanized Finish Grade A Full Thread more

1/2 -13 x 1-1/4 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 50 - by Fastener Depot LLC

Coarse Thread Superior Corrosion Resistance Hot Dipped Galvanized Finish Grade A Full Thread more

1/8 x 1-1/4 Zinc Plated Steel Coarse Thread Slotted Flat Head Stove Bolts

Diameter: 1/8 Length: 1-1/4 Material: Steel Finish: Zinc Head Style: Flat (Slotted) Thread Size: 32 (Coarse) Thread Length: Full Type: Machine Screw A machine screw also called a stove bolt is generally a smaller fastener threaded the entire length of... more

1/2 -13 x 1 1/4 Coarse Thread Grade 5 Plow Bolt #3 Flat Head Medium Carbon Steel Black Oxide Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-118823 Fastener Type: Plow Bolt #3 Flat Head Size Description: 1/2 -13 x 1 1/4 Diameter/Nominal Size: 1/2 Length: 1 1/4 Thread Pitch: 13 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage: Full System... more

1/2 -13 x 1-1/4 Plain Grade 5 Steel Coarse Thread Flat Head Plow Bolts PBS5-161

Diameter: 1/2 Length: 1-1/4 Material: Steel Finish: Plain Head Style: Flat Thread Size: 13 (Coarse) Thread Length: Full Hardness: Grade 5 Type: Plow Bolt Application: Gang Plows|Road Graters|Scoop Shovels A plow bolt is similar to a carriage bolt... more

1/8 x 1-1/4 Zinc Plated Steel Coarse Thread Slotted Flat Head Stove Bolts

Diameter: 1/8 Length: 1-1/4 Material: Steel Finish: Zinc Head Style: Flat (Slotted) Thread Size: 32 (Coarse) Thread Length: Full Type: Machine Screw A machine screw also called a stove bolt is generally a smaller fastener threaded the entire length of... more

1/2 -13 x 1 1/4 Coarse Thread Grade 5 Plow Bolt #3 Flat Head Medium Carbon Steel Black Oxide Pk 50

PRODUCT SPECIFICATIONS Part #: 0000-118823 Fastener Type: Plow Bolt #3 Flat Head Size Description: 1/2 -13 x 1 1/4 Diameter/Nominal Size: 1/2 Length: 1 1/4 Thread Pitch: 13 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage: Full System... more

1/4 -20 x 1-1/2 Zinc Flat Countersunk Head Elevator Bolts EBFCS-067 (10 pcs.)

Diameter: 1/4 Length: 1-1/2 Material: Steel Finish: Zinc Head Style: Flat Countersunk Thread Size: 20 (Coarse) Type: Elevator Bolt Box of 10. These bolts have large flat heads and are commonly found in conveyor systems. more

1/4 -20 x 2-3/4 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Grade A Full Thread Quantity 100 - by WBTAYB WBTAYB

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

1/4 -20 x 2-3/4 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 100 - by Fastener Depot LLC

Coarse Thread Superior Corrosion Resistance Hot Dipped Galvanized Finish Grade A Full Thread more

3/4 -10 x 4-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 25 - by Fastener Depot LLC

Coarse Thread Superior Corrosion Resistance Hot Dipped Galvanized Finish Grade A Full Thread more