Home Hardware › Prime Line Products › bearings sliding door wardrobe pulley

Prime-Line D 1584 1-1/4 In. Sliding Door Roller Assembly for Northrup Doors Steel Ball Bearing - Quantity 6

1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly Northrup. This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile... more

Prime-Line 1-1/2 in. Ball Bearing Steel Sliding Door Roller Assembly, for Pella (Single Pack) in Brown | 7.4 H x 3.75 W x 0.85 D in | Wayfair

This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... more

Prime-Line 1-1/4 in. Ball Bearing Sliding Door Dual Roller Assembly, for Guaranteed Products (Single Pack) in Brown | Wayfair D 1548

This is a unique, one of a kind, trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... more

Prime-Line Sliding Door Roller Assembly w/ 1-1/2 in. Steel Ball Bearing (Single Pack) in Brown | 0.38 H x 3.88 W x 4 D in | Wayfair MP1563

This roller is constructed from steel. It comes affixed to an adjustable steel housing. Used by Air Control, Howmet, Krestmark, and a variety of other sliding glass door manufacturers. | Prime-Line Sliding Door Roller Assembly w/ 1-1/2 in. Steel Ball... more

Prime-Line N 6717 Offset Sliding Wardrobe Front Door Roller Assembly 5/16 In. 2-Pk. - Quantity 6

2 Pack side mounted top hung adjustable wardrobe door roller assembly with a single 7/8 in. grooved nylon wheel for the front door panel. The stamped steel bracket assembly is adjustable and has a 5/16 in. offset. It fits 3/4 in. to 1-3/8 in. thick... more

Sliding Wardrobe Door Roller Top Hung Assemblies Superior (2-pack)

This is an adjustable side mounted top hung closet door roller assembly with a 7/16 in. offset and a 15/16 in. convex nylon roller used on Superior brand closet doors. It fits 3/4 in. to 1-3/8 in. thick doors. Originally used by Superior Door. more

Prime Line N 6668 Sliding Wardrobe Back Door Roller Assemblies 7/8 Each

Highlights: Single wheel Side mounting adjustable steel bracket For 3/4 to 1-3/8 thick doors up to 50lbs Roller Diameter: 7/8 Roller Edge Type: Convex Roller Material: Nylon Offset: 1/2 Mount: Side Carded more

Prime-Line N 6718 Offset Sliding Wardrobe Back Door Roller Assembly 9/16 In. 2-Pk. - Quantity 6

9/16 in. Offset Sliding Wardrobe Back Door Roller Assembly (2-pack). This is a side mounted top hung adjustable wardrobe door roller assembly with a single 7/8 in. grooved nylon wheel for the back door panel. The stamped steel bracket assembly is... more

Prime-Line D 1685 1-1/2 In. Steel Ball Bearing Sliding Door Roller Assembly for Ador and Hilite - Quantity 6

1-1/2 in. Steel Ball Bearing Sliding Door Roller Assembly Ador and Hilite. This is two piece roller assembly used on Ador Hilite patio doors. The outer housing is 5/8 in. wide 31/32 in. tall with a 11/32 in. flare width and has two hook tabs on top.... more

Prime-Line Products D 1506 Sliding Door Roller 1-1/2-Inch Nylon Ball Bearing 2-Pack

Bottom adjustment rollers with wide center groove. 1-1/2 In. nylon ball bearing rollers. Steel inner race with 1/4 In. hole.From the ManufacturerBottom adjustment rollers with wide center groove. 1-1/2 In. nylon ball bearing rollers. Steel inner race... more

Prime-Line D 1798 1-1/4 In. Nylon Ball Bearing Sliding Door Roller Set (2 Pack)

Prime-Line D 1798 1-1/4 In. Nylon Ball Bearing Sliding Door Roller Set (2 Pack) more

1-1/2 in. Steel Ball Bearing Sliding Door Roller Assembly

This is an F-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more

Prime-Line M 6054 Frameless Sliding Shower Door Top Bracket 3/4 inch Flat Plastic Wheel Steel Ball Bearings White

Prime-Line M 6054 Frameless Sliding Shower Door Top Bracket 3/4 inch Flat Plastic Wheel Steel Ball Bearings White more

Prime-Line D 1798 Sliding Door Roller Set with 1-1/4 inch Nylon Ball Bearing (2-pack) Gold

Prime-Line D 1798 Sliding Door Roller Set with 1-1/4 inch Nylon Ball Bearing (2-pack) Gold more

Prime-Line D 1986 1-1/4 In. Steel Ball Bearing Sliding Door Tandem Roller Assembly - Quantity 6

1-1/4 in. Steel Ball Bearing Sliding Door Tandem Roller Assembly. This is a plain back tandem roller assembly used by a variety of sliding patio door manufacturers of metal or vinyl framed patio doors. It has an in-line tandem inner housing with 1-1/4... more

1-1/8 in. Steel Ball Bearing Sliding Door Tandem Roller

This is a C-tab tandem roller assembly with 1-1/8 in. steel ball bearing rollers installed. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 9/16... more

Prime-Line D 1808 Sliding Door Tandem Roller Assembly Steel Ball Bearings 1-1/4 In. - Quantity 6

This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other vinyl patio door manufacturers. The housing is 3/4 in. wide and 1... more

Prime-Line D 1762 1-1/4 In. Steel Ball Bearing Sliding Door Roller Assembly Nu-Air - Quantity 6

1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly Nu-Air. This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in.... more

Prime-Line D 1822 1-1/2 In. Steel Ball Bearing Sliding Door Roller Assembly - Quantity 6

1-1/2 in. Steel Ball Bearing Sliding Door Roller Assembly. This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 27/32 in. flare and is 1-9/16 in.... more

Sliding Patio Door Roller Assembly With 1-1/4 Steel Ball Bearing Roll Each

1-1/4 Steel door roller assembly with ball bearing; plain back housing. Carded. more

Prime-Line D 1998 1-1/2 In. Ball Bearing Steel Sliding Door Roller Assembly for Pella (Single Pack)

Prime-Line D 1998 1-1/2 In. Ball Bearing Steel Sliding Door Roller Assembly for Pella (Single Pack) more

Prime-Line D 1594 Steel Ball Bearing Sliding Patio Door Roller Assembly 1-1/2 In. - Quantity 6

Back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more

1-1/4 in. Steel Ball Bearing Low Carriage Sliding Door Roller Assembly

This is a unique housing tandem roller assembly used by a variety of manufacturers of sliding patio doors. It has two 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a stamped steel housing with end adjustment . The square shaped... more

Prime-Line Products D 1858 Sliding Door Tandem Roller Assembly with 1-1/4-Inch Steel Ball Bearing Yellow zinc

Product DescriptionTwin steel ball bearing rollers are housed in an adjustable steel assembly that helps align your door to the jamb. Bottom mounted design allows for use on vinyl styled doors. Comes finished in a gold zinc plating.From the... more

Prime-Line D 1808 1-1/4 In. Steel Ball Bearing Sliding Door Tandem Roller Assembly for Milgard (Single Pack)

Prime-Line D 1808 1-1/4 In. Steel Ball Bearing Sliding Door Tandem Roller Assembly for Milgard (Single Pack) This is a plain back tandem roller assembly with two 1-1/4 inch concave steel ball bearing rollers. The stamped steel housing is adjustable.... more

Prime-Line D 1998 Pella Sliding Door Roller Assembly with 1-1/2 inch Ball Bearing Steel

Prime-Line D 1998 Pella Sliding Door Roller Assembly with 1-1/2 inch Ball Bearing Steel more

Prime-Line D 1513 1-1/4 In. Nylon Ball Bearing Sliding Door Roller Assembly - Quantity 6

1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly. This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are... more

Prime-Line Products D 1780 Sliding Door Tandem Roller Assembly 1-14-Inch Ball Bearing Stainless

This patio door roller is constructed from stainless steel and has tandem rollers with a diameter of 1-1/4 in. It comes affixed to an adjustable stainless steel housing assembly. This roller is perfect for use in severe weather environments.... more

1-1/8 in. Steel Ball Bearing Sliding Door Tandem Roller Assembly

This is a C-tab tandem roller assembly with two 1-1/8 inch steel ball bearing rollers. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16 in.... more

Sliding Glass Door Roller Assembly 1-1/8 Steel Ball Bearing Roller Ad Each

1-1/8 Steel ball bearing door roller assembly for Viking doors. Carded. more

Prime-Line D 1754 1-1/2 In. Steel Ball Bearing Sliding Door Tandem Roller Assembly (Single Pack)

Prime-Line D 1754 1-1/2 In. Steel Ball Bearing Sliding Door Tandem Roller Assembly (Single Pack) This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved (center grooved) edge... more

Prime-Line D 1532 1-1/4 In. Steel Ball Bearing Sliding Roller Assembly for Fleetwood - Quantity 6

1-1/4 in. Steel Ball Bearing Sliding Roller Assembly Fleetwood. This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide 1-3/16 in. tall and 1-1/2 in. long.... more

Prime-Line N 6504 Wardrobe Door Roller Assembly Front 7/8 In. Nylon Roller 2-Pk. - Quantity 6

2 Pack side mounted top hung wardrobe roller assembly with a single 7/8 in. convex nylon wheel for the front sliding door. The stamped steel bracket assembly is adjustable and has an 1/4 in. offset. It is fitted onto the wardrobe front door and fits... more

3Pc Prime-Line 1 in. D X 1/4 in. L Mill Nylon/Steel Wardrobe Door Roller Assembly 2 pk

Repair your sliding door rollers with the Prime-Line products 3/4 inch back-position top-hung bypass closet door rollers with brackets. These rollers fit doors 3/4 - 1-3/8 inch thick are housed in 3/4 inch offset adjustable brackets and are compatible... more

Prime-Line N 6505 Wardrobe Door Roller Assembly Back 7/8 In. Nylon Roller 2-Pk. - Quantity 6

2 Pack side mounted top hung wardrobe roller assembly with a single 7/8 in. convex nylon wheel for the back sliding door. The stamped steel bracket assembly is adjustable and has an 1/2 in. offset. It is fitted onto the wardrobe front door and fits 3/4... more

Prime-Line GD 52108 Garage Door Pulley with Strap 4 In. 1-Pk. - Quantity 6

4 inch Pulley with Strap and Axle Bolt (Single Pack) This is a 4 in. heavy-duty galvanized steel pulley with galvanized steel strap. Made of case hardened steel race with steel ball bearings. Comes factory lubricated and can be used at stationary or... more

Prime-Line GD 52109 Garage Door Pulley with Strap 3 In. 1-Pk. - Quantity 6

3 in. heavy-duty galvanized steel pulley with galvanized steel strap. Made of case hardened steel race with steel ball bearings. Comes factory lubricated and can be used at stationary or spring pulley positions. This pulley is designed to support steel... more

1PACK Prime-Line 1-1/4 In. Dia. x 5-5/8 In. L. Tandem Steel Patio Sliding Door Roller with Housing Assembly

Tandem steel ball bearing rollers with adjustable steel housing assembly. more