Home Hardware › Alloy › Anchors

DEWALT 02808-PWR Zamac Nailin Nail Drive Anchor, 1/4" Dia., 1" L, Alloy Steel

Drive Anchor, Anchor Diameter 1/4 in, Overall Length 1 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Head Diameter 0.54 in, Head Height 0.140625 in,... more

Powers Fasteners B2198996 Double Expansion Anchor - 0.38 x 2 in. - Zamac Alloy - UNC - Pack of 50

Double Expansion Anchor - 3/8 x 2 - Zamac Alloy - UNC - Pkg of 50 - Powers 9520 The Double is a dual expansion machine bolt anchor particularly suited for materials ofquestionable strength. It can be used in solid concrete block brick and stone. Job... more

1/4 Expansion Shield Anchor Double Zinc Alloy Pk 250

PRODUCT SPECIFICATIONS Part #: 0000-115451 Fastener Type: Expansion Shield Anchor Double Size Description: 1/4 Diameter/Nominal Size: 1/4 System of Measurement: Inch Material: Zinc Alloy Finish: Plain Finish (No Plating) Average Piece Weight: 0.0424000... more

Dottie #8 Zinc Alloy Walldriller Anchor Kit w/ Pan Head Combo Drive Screws

The WDK8 contains #8 Zinc Anchors and #8 Phillips/Slotted Drive Sheet Metal Screws. The Wall Board Anchor is manufactured with a fine centered point that helps guide the anchor into the material. It features a unique sharp thread design that allows it... more

CAMPBELL CHAIN & FITTINGS 5410895 1/2" Alloy Anchor Shackle, Screw Pin, Forged

1/2In Anchor Shackle Screw Pin Galv more

ZORO SELECT U70650.025.0075 Nail Drive Anchor, Alloy Steel 100 PK

Hammer Drive Pin Anchor Set, Anchor Diameter 1/4 in, Overall Length 3/4 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Drill Bit Size 1/4 in, Minimum... more

ZORO SELECT U70650.025.0150 Nail Drive Anchor, Alloy Steel 100 PK

Hammer Drive Pin Anchor Set, Anchor Diameter 1/4 in, Overall Length 1 1/2 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Drill Bit Size 1/4 in, Minimum... more

ZORO SELECT U70650.025.0125 Nail Drive Anchor, Alloy Steel 100 PK

Hammer Drive Pin Anchor Set, Anchor Diameter 1/4 in, Overall Length 1 1/4 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Drill Bit Size 1/4 in, Minimum... more

ZORO SELECT U70650.025.0100 Nail Drive Anchor, Alloy Steel 100 PK

Hammer Drive Pin Anchor Set, Anchor Diameter 1/4 in, Overall Length 1 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Drill Bit Size 1/4 in, Minimum... more

ZORO SELECT U70650.018.0087 Nail Drive Anchor, Alloy Steel 100 PK

Hammer Drive Pin Anchor Set, Anchor Diameter 3/16 in, Overall Length 7/8 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Drill Bit Size 1/4 in, Minimum... more

DEWALT 02840-PWR Zamac Hammer-Screw Nail Drive Anchor, 1/4" Dia., 1" L, Alloy

Drive Anchor, Anchor Diameter 1/4 in, Overall Length 1 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Head Diameter 0.54 in, Head Height 0.140625 in,... more

DEWALT 02806-PWR Zamac Nailin Nail Drive Anchor, 1/4" Dia., 3/4" L, Alloy Steel

Drive Anchor, Anchor Diameter 1/4 in, Overall Length 3/4 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Head Diameter 0.54 in, Head Height 0.140625 in,... more

DEWALT 02814-PWR Zamac Nailin Nail Drive Anchor, 1/4" Dia., 1-1/4" L, Alloy

Drive Anchor, Anchor Diameter 1/4 in, Overall Length 1 1/4 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Head Diameter 0.54 in, Head Height 0.140625... more

DEWALT 09409-PWR Wall Anchor, 3/4" L, Zamac Alloy, 100 PK

Wall Anchor, System of Measurement Inch, Wall Anchor Type Plug Anchor, Anchor Length 3/4 in, Thread Size #6 to #8, Drive Type Not Applicable, Head Type Not Applicable, Includes Screw No, Screw Size Included Not Applicable, Screw Length Included Not... more

DEWALT 02870-PWR Zamac Nailin Nail Drive Anchor, 1/4" Dia., 1-1/2" L, Alloy

Hammer Drive Pin Anchor, Anchor Diameter 1/4 in, Overall Length 1 1/2 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Stainless Steel, Finish Plain, Head Type Round, Head Diameter 0.54 in, Head... more

DEWALT 02864-PWR Zamac Nailin Nail Drive Anchor, 1/4" Dia., 1-1/4" L, Alloy

Hammer Drive Pin Anchor, Anchor Diameter 1/4 in, Overall Length 1 1/4 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Stainless Steel, Finish Plain, Head Type Round, Head Diameter 0.54 in, Head... more

DEWALT 02839-PWR Zamac Hammer-Screw Nail Drive Anchor, 1/4" Dia., 3/4" L, Alloy

Drive Anchor, Anchor Diameter 1/4 in, Overall Length 3/4 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Head Diameter 0.54 in, Head Height 0.140625 in,... more

CAMPBELL CHAIN & FITTINGS 5410695 3/8" Alloy Anchor Shackle, Screw Pin, Forged

Anchor Shackle, Shackle Type Anchor Shackle more

ZORO SELECT U70650.025.0200 Nail Drive Anchor, Alloy Steel 100 PK

Hammer Drive Pin Anchor Set, Anchor Diameter 1/4 in, Overall Length 2 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Drill Bit Size 1/4 in, Minimum... more

DEWALT 02846-PWR Zamac Hammer-Screw Nail Drive Anchor, 1/4" Dia., 2" L, Alloy

Drive Anchor, Anchor Diameter 1/4 in, Overall Length 2 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Head Diameter 0.54 in, Head Height 0.140625 in,... more

DEWALT 02858-PWR Zamac Nailin Nail Drive Anchor, 1/4" Dia., 1" L, Alloy Steel

Hammer Drive Pin Anchor, Anchor Diameter 1/4 in, Overall Length 1 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Stainless Steel, Finish Plain, Head Type Round, Head Diameter 0.54 in, Head Height... more

DEWALT 02876-PWR Zamac Nailin Nail Drive Anchor, 1/4" Dia., 2" L, Alloy Steel

Hammer Drive Pin Anchor, Anchor Diameter 1/4 in, Overall Length 2 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Stainless Steel, Finish Plain, Head Type Round, Head Diameter 0.54 in, Head Height... more

DEWALT 02838-PWR Zamac Nailin Nail Drive Anchor, 1/4" Dia., 2" L, Alloy Steel

Hammer Drive Pin Anchor, Anchor Diameter 1/4 in, Overall Length 2 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Flat, Head Diameter 0.54 in, Head Height... more

MKT FASTENING 1674060 Sup-R-Split Nail Drive Anchor, 1/4" Dia., 1-1/2" L, Alloy

Hammer Drive Anchor, Anchor Diameter 1/4 in, Overall Length 1 1/2 in, Anchor Material Steel, Finish Zinc Plated, Head Type Flat, Head Height Not Applicable, Head Diameter 0.5 in, Drill Bit Size 1/4 in, Minimum Installation Depth 1 1/8 in, Ultimate... more

Apex Tool Group Alloy Anchor Galv Screw Pin Shackle 3/8 Bail EA (193-5410695)

Alloy Anchor Galvanized Shackles 3/8 in Bail Size 1 Ton Screw Pin Shackle Campbell Alloy Anchor Galvanized Shackles Length [Nom]: 1 in Locking Type: Screw Pin Inner Length [Nom]: 1 7/16 in Width [Nom]: 1 in Type: Screw Pin Shackle Finish: Galvanized... more

1 Nominal Chain Size 12.5 Ton Alloy Steel Screw Anchor Shackle

1 Nominal Chain Size 12.5 Ton Alloy Steel Screw Anchor Shackle 1 Diam 1-1/8 Pin Diam 3-3/4 High x 1-11/16 Wide Inside Jaw 2-1/2 Inside Width 2-3/8 Max Body Thickness (MOQ=1 Pkg Qty=1) more

Nail Anchor - 1/4 x 1-1/2 - Mushroom Head - Zamac Alloy Body - Carbon Steel Nail - Pkg of 100 Lot of 100

The anchor can be used for light duty tamperproof applications. The Zamac Nailin is a nail drive anchor which has a body formed from Zamac alloy. The anchor can be used in concrete block brick or stone. A corrosion resistant Zamac alloy is used to form... more

#10-14 x 1 1/2 Wood Screw Anchor Lead Alloy Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-112972 Fastener Type: Wood Screw Anchor Size Description: #10-14 x 1 1/2 Diameter/Nominal Size: #10-14 Length: 1 1/2 System of Measurement: Inch Material: Lead Alloy Finish: Plain Finish (No Plating) Average Piece... more

#6-8 x 1 1/2 Wood Screw Anchor Lead Alloy Pk 750

PRODUCT SPECIFICATIONS Part #: 0000-111419 Fastener Type: Wood Screw Anchor Size Description: #6-8 x 1 1/2 Diameter/Nominal Size: #6-8 Length: 1 1/2 System of Measurement: Inch Material: Lead Alloy Finish: Plain Finish (No Plating) Average Piece... more

Crosby Anchor Shackle 25 000 lb Alloy Steel 1017582

Anchor Shackle Shackle Type Anchor Shackle Lifting Capability For Lifting Working Load Limit 25 000 lb Width Between Eyes 1 3/4 in Body Material Alloy Steel Inside Length 3 3/4 in Inside Width 2 3/4 in Body Thickness 1 in Body Color Silver Body Finish... more

#6-8 x 3/4 Wood Screw Anchor Lead Alloy Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-108324 Fastener Type: Wood Screw Anchor Size Description: #6-8 x 3/4 Diameter/Nominal Size: #6-8 Length: 3/4 System of Measurement: Inch Material: Lead Alloy Finish: Plain Finish (No Plating) Average Piece Weight:... more

5/16 Expansion Shield Anchor Single Zinc Alloy Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-116562 Fastener Type: Expansion Shield Anchor Single Size Description: 5/16 Diameter/Nominal Size: 5/16 System of Measurement: Inch Material: Zinc Alloy Finish: Plain Finish (No Plating) Average Piece Weight:... more

1/4 x 3 Split Drive Anchors / Flat Head / Alloy Steel / Zinc / Fixture Clearance Hole: 5/16 / High Grade Heat Treated Alloy Steel (Quantity: 100 pcs)

Flat Head Split Drive Anchors Light duty friction-set anchor for wood-to-concrete applications High Grade Heat Treated Alloy Steel Zinc plate more

Hammer Drive Anchor 1/4 x 1-1/2 Mushroom Head Alloy Steel Zinc 100 Pack Lot of 2

Hammer Drive Anchor - 1/4 x 1-1/2 - Mushroom Head - Alloy Steel - Zinc - Pkg of 100 - BBI 266050 Lot of 2 more

5/16 Single Expansion Anchors / Zinc Alloy / Recommended Hole Diameter: 5/8 (Quantity: 50 pcs)

Single Expansion Anchors Short Sizes Light duty anchor for use in soft masonry stone brick or concrete Holds its place when changing fixture. Use w/ machine screw or bolt Zamac Alloy more

1/4 x 1 1/2 Split Drive Anchors / Round Head / Alloy Steel / Zinc / Fixture Clearance Hole: 5/16 / High Grade Heat Treated Alloy Steel (Quantity: 100 pcs)

Round Head Split Drive Anchors Light duty friction-set anchor for use in concrete or stone High Grade Heat Treated Alloy Steel Zinc plate more

1/4 x 2 1/2 Split Drive Anchors / Round Head / Alloy Steel / Zinc / Fixture Clearance Hole: 5/16 / High Grade Heat Treated Alloy Steel (Quantity: 100 pcs)

Round Head Split Drive Anchors Light duty friction-set anchor for use in concrete or stone High Grade Heat Treated Alloy Steel Zinc plate more

1/4 x 1 1/4 Split Drive Anchors / Round Head / Alloy Steel / Zinc / Fixture Clearance Hole: 5/16 / High Grade Heat Treated Alloy Steel (Quantity: 100 pcs)

Round Head Split Drive Anchors Light duty friction-set anchor for use in concrete or stone High Grade Heat Treated Alloy Steel Zinc plate more