You're in Home Hardware
See Matches in:
Narrow Search Results
Price Range
By Brand
- Prime Line Products remove
By Keyword
Best Seller | This is a set of 2 black door bumpers that can be used on most closet doors or many patio doors. Each bumper is a 1 in. diameter and 1-13/16 in. long black rubber bumper with a steel insert washer. The rubber bumper is fastened on the appropriate door... more | go to store |
This is a flat-edged roller and axle. Flat zinc plated steel roller. Constructed with a plastic axle pin. Used on Premier and Keller windows. | Prime-Line 1/2 in. Flat Steel Sliding Window Roller, w/ Axle Pins, Keller in White/Yellow | 5.44 H x 3.82 W... more | go to store |
This is a combination of a 1-1/2 in. diameter Plastic concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole and a combination of 5 different axle choices. Depending on the application, you can choose to rivet the roller... more | go to store |
This is a combination of a 1-1/2 in. diameter Plastic concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole and a combination of 5 different axle choices. Depending on the application, you can choose to rivet the roller... more | go to store |
This is a set of 2 black door bumpers that can be used on most closet doors or many patio doors. Each bumper is a 1 in. diameter and 1-13/16 in. long black rubber bumper with a steel insert washer. The rubber bumper is fastened on the appropriate door... more | go to store |
This is a combination of a 1-1/2 in. diameter Plastic concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole and a combination of 5 different axle choices. Depending on the application, you can choose to rivet the roller... more | go to store |
This is a plain back diecast patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a #10-32 threaded hole on... more | go to store |
This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing... more | go to store |
This is a black sliding window roller that is constructed from steel. It features a 1/2 in. diameter flat edge steel roller affixed to a black plastic housing. The flat wheel design is used by a variety of window manufacturers. | Prime-Line 1/2 in.... more | go to store |
This is the replacement inner housing that fits into the Prime-Line part D 1545 outer housing. It has a 1-1/2 in. steel ball bearing roller installed in the stamped steel inner housing. If needed, the adjusting screw can be backed out of the old roller... more | go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... more | go to store |
D 1876 is a Unique Housing tandem roller assembly often found on Andersen patio doors as well as several other manufacturers of wood patio doors. It has two 1-1/2 inch concave steel ball bearing rollers set in a stamped steel housing with side... more | go to store |
These patio door lock pins are constructed of steel and come in a chrome plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on chain for easy storage when not in use, and a... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more | go to store |
This is a plain back tandem roller assembly used by a variety of patio door manufacturers of metal or vinyl framed patio doors. It has two in-line 1-1/4 in. concave Plastic ball bearing rollers set in a stamped steel housing with rear adjustment. The... more | go to store |
This is an F-tab tandem roller assembly with two 1-1/8 in. concave steel ball-bearing rollers installed. When the corner screw passes through the F-tab, the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
This is a C-tab tandem roller assembly with two 1-1/8 inch steel ball-bearing rollers. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It is 9/16 in. wide with a 13/16 in. flare, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 10-32 threaded mounting hole on the... more | go to store |
This is an unique back diecast patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used on Crossly doors. It's unique diecast housing is 11/16 in. stepping down to 9/16 in. wide, 1-1/8 in. tall and 2-5/16 in. long with a flare... more | go to store |
This is a sliding patio door keeper. It is made of heavy gauge stamped steel that is zinc plated, with 3/4 in. mounting holes on center. The vertical slots to allow easy adjustment. Also features a 3/8 in. hook offset. | Prime-Line Stamped Steel,... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... more | go to store |
This is a K-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. The T-shaped tab (K-Tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 5/8... more | go to store |
This is a white plastic housing sliding roller and guides with a flat edge steel roller. Features a 2 position height adjustment. Used by Olson and a variety of manufacturers. | Prime-Line Sliding Window Roller & Guide, Steel in White | 5.44 H x 3.82 W... more | go to store |
This is a white finish left-handed, 13-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on white finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90... more | go to store |
This is a bronze finish right-handed, 13-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on bronze finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90... more | FREE shipping go to store |
This is a Truth Ellipse series right-handed, 13-1/2 in. single arm operator with a baked enamel bronze finish. It is made of heavy-duty diecast zinc. The steel arm, worm drive and gears are protected with a corrosive resistant finish and it opens to a... more | FREE shipping go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is... more | go to store |
This is an F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more | go to store |
This is an F-tab patio door roller assembly with a 1-1/4 in. concave steel ball-bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more | go to store |
Has you screen door latch been damaged, broken or is it just missing? This sliding screen door keeper or strike is often used by Columbia and Trimview screen doors as well as a variety of other screen door manufacturers. It is 1/2 inch wide with a 9/16... more | go to store |
This is a Truth Ellipse series left-handed, 9-1/2 in. single arm operator with a baked enamel bronze finish. It is made of heavy-duty diecast zinc. Steel arm, worm drive and gears are protected with a corrosive resistant finish and it opens to a full... more | FREE shipping go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more | go to store |
This is a white plastic housing with a concave steel roller. It features a two different height adjustment. Used by Alenco window. | Prime-Line Sliding Window Roller Assembly, 7/16 in. Steel Wheel in White | 5.4 H x 3.75 W x 0.45 D in | Wayfair more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... more | go to store |
These patio door lock pins are constructed of steel and come in a chrome plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on chain for easy storage when not in use, and a... more | go to store |
This is an F-tab tandem roller assembly with two 1-1/8 in. concave steel ball bearing rollers installed. When the corner screw passes through the F-tab, the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... more | go to store |
This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... more | go to store |
Ads related to 6 5 8 x 2