You're in Home Hardware
See Matches in:
Narrow Search Results
Price Range
By Brand
- Prime Line Products remove
By Seller
By Material
By Home Hardware Types
By Home Hardware Features
By Keyword
Best Seller | This is a K-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required for installation. The... more | go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... more | go to store |
This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a stainless steel... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a center grooved... more | go to store |
This is a unique back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It's has a tab design on the bottom back edge that snaps the roller assembly into place on the door stile edge before being held in place by a... more | go to store |
This patio door handle comes with a black extruded aluminum inside handle with a hardwood pull attached. It can be used on either right or left-handed doors. Comes with a latch lever and a back diecast outside handle. The stamped steel lever with... more | go to store |
This patio door handle set is constructed of diecast and comes in a white painted finish. It features an anti-lift design and latches with dual hooks. This sliding door handle set is used to replace surface-mounted hook latch handles of sliding... more | FREE shipping go to store |
This sliding door handle is constructed from diecast and comes finished in white. It features an inside pull with steel latch and an offset outside pull. It has a keeper and features a non-keyed design. | Prime-Line Sliding Door Handle, Diecast... more | FREE shipping go to store |
This is a steel tandem C-tab roller assembly with 1-1/4 in. steel ball bearing rollers. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 27/32 in. flare, and is 1-9/16 in. tall. It features a rear adjusting screw with a 1/4-20... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It is 9/16 in. wide with a 13/16 in. flare, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 10-32 threaded mounting hole on the... more | go to store |
This is a unique housing tandem roller assembly used by a variety of manufacturers of sliding patio doors. It has two 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a stamped steel housing with end adjustment . The square... more | go to store |
This is a C-tab patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. The housing is 23/32 in. wide and 1-3/16 in. tall, and 2-5/16 in. long. As the C-shaped tab fits around the corner screw, it is captured by the... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... more | go to store |
This Mill finish patio door handle is a surface with clamp latch style. Often found on older style patio doors, it is mounted on the door's inside frame and the clamp latch latches onto an extrusion (astragal) on the jamb. It has 1-13/16 inch handle... more | FREE shipping go to store |
This sliding door handle set is constructed from die cast. It comes powder coated in white and is non-handed. This door handle set has an extruded aluminum base and 4-15/16 In. mounting hole centers. | Prime-Line Diecast, Patio Door Handle Set w/... more | FREE shipping go to store |
This sliding door handle set is constructed from extruded aluminum. It features a durable diecast handle and has a reverse clamp latch. This door handle set has 4-15/16 In. mounting hole centers. | Prime-Line Sliding Door Cam Latch, Reverse Hook,... more | $103.09 $94.88 FREE shipping go to store |
This Prime-Line C 1177 Diecast Mortise Style Sliding Door Handle operates most mortise latches installed in the door. It is used by a wide variety of sliding patio door manufacturers that have mounting holes 3-15/16 inch on center. The screw mount... more | FREE shipping go to store |
This is a C-tab patio door roller assembly with a 1-1/4 in. diameter concave, or grooved, steel ball bearing roller. As the C-shaped tab fits around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
Prime-Line 1-1/4 in | 7.35" H X 3.75" W X 0.5" D | Wayfair D 1603 This is an unique back diecast patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used on Crossly doors. It's unique diecast housing is 11/16 in. stepping down to 9/16 in. wide, 1-1/8 in. tall and 2-5/16 in. long with a... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a unique plain back housing that is 13/16 in. wide with a 31/32 in. flare and 1-5/32 in. tall. It is rear adjusting with a 0.228 diameter... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
This is a unique back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The unique housing is 11/16 in. wide and 1-3/8 in. tall. It is rear adjusting with a set of tabs or ears that insert into slots in the door's bottom... more | go to store |
This is a diecast unique back that is used on Art Door patio doors. The 1-11/16 in. diameter by 7/16 in. wide roller is wider than the average roller. It is installed in a stamped steel bracket that is then installed onto the diecast housing. The... more | go to store |
This is a plain back, patio door roller assembly with a 1-1/2 in. concave, or grooved, steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 13/16 in. dimple width, and 1-5/8 in. tall. It is rear adjusting with a 1/4-20... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This Andersen roller assembly... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This high-tension steel spring... more | go to store |
This is a Plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 27/32 in. flare, 1-1/8 in. tall and 2-7/16 in. long. It is rear adjusting with a... more | go to store |
Easily operate your door with the Prime-Line Products back patio door roller assembly. The housing is 11/16 in. wide and 1 in. tall with a 1/4-20 threaded mounting hole on the back. The steel construction and sleek finish make it as stylish as it is... more | go to store |
This is a 1-1/4 in. diameter concave nylon ball bearing roller replacement used on a variety of patio, and wardrobe door roller assemblies. It has a steel center race and the standard 1/4 in. axle hole and is 5/16 in. wide. Included are 2 axle... more | go to store |
This is a plain back tandem roller assembly used by a variety of patio door manufacturers of metal or vinyl framed patio doors. It has two in-line 1-1/4 in. concave Plastic ball bearing rollers set in a stamped steel housing with rear adjustment.... more | go to store |
This is a C-tab patio door roller assembly with a 1-1/8 in. diameter concave, or grooved, steel ball bearing roller. As the C-shaped tab fits around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
This is a U-back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 19/32 in. wide with a 23/32 in. flare and 1-3/16 in. tall. It is rear adjusting with a 3/16 in. diameter mounting... more | go to store |
This is a stainless steel unique housing tandem roller assembly, often found on Andersen sliding patio doors as well as a variety of other manufacturers of wood patio doors. It has two 1-1/4 in. concave stainless steel ball bearing rollers set in a... more | FREE shipping go to store |
This chain door lock is constructed of stamped steel and comes in a select plated finish. It features a welded steel chain with all fasteners necessary for complete installation. This chain door lock can be used on a variety of door types. The... more | go to store |
Ads related to 5 sets stainless steel door