You're in Home Hardware
Narrow Search Results
Price Range
By Brand
- Prime Line Products remove
By Material
By Home Hardware Types
By Home Hardware Features
- 90 Degree
- Adjustable remove
- Commercial
- Self Closing
- Sliding
- Square
By Keyword
Best Seller | This is an adjustable stamped steel sliding closet door floor guide, with nylon tips. The guides are made of white nylon and can be adjusted to accommodate doors from 3/4 in. to 1-1/4 in. wide. Used by a variety of closet door manufacturers. |... more | go to store |
Prime-Line Steel, Sliding Screen Door Latch Strike, Adjustable | Wayfair A 148 Has your screen door latch been damaged, or broken or is it just missing? This sliding screen door keeper or strike is used by a variety of sliding screen door manufacturers. It has a downward hook and is 3/8 inch wide with a 1/4 inch projection. The... more | go to store |
These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... more | go to store |
This latch and keeper assembly fits onto International brand screen doors. The keeper has mounting holes 3-1/2 in. on center, and is adjustable up or down as needed. The nylon latch fits into an aluminum slide lever that is part of the sliding screen... more | go to store |
These strike plates are constructed of stamped steel and come in a brass-plated finish. They feature an adjustable depth to allow for snug-fit adjustments of door to jamb latching. Using strikes like these help eliminate rattling of doors when loose... more | go to store |
This is a E-tab patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 23/32 in.... more | go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. Finish: Classic Bronze,... more | go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. Finish: Classic Bronze,... more | go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. Finish: Satin Nickel, Size:... more | go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. Finish: Brass, Size: 1.18"... more | go to store |
This sliding patio door roller assembly is constructed from steel. It features a 1 In. ball bearing wheel with an adjustable steel housing. This type of roller assembly is quick and easy to install. | Prime-Line Single 1-1/8 in. Steel Ball Bearing... more | go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. Finish: Brass, Size: 5.35"... more | $15.02 $13.84 go to store |
This is a U-back patio door roller assembly with a 1-1/2 in. concave (center grooved) steel ball-bearing roller. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw is tightened. The housing is... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved Plastic ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
This is a U-back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting... more | go to store |
This is a U-back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting... more | go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. Size: 5.4" H x 3.75" W x... more | $14.99 $13.66 go to store |
This is a C-tab patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. The housing is 23/32 in. wide and 1-3/16 in. tall, and 2-5/16 in. long. As the C-shaped tab fits around the corner screw, it is captured by the... more | go to store |
This is a universal design roller. It has a 1-1/4 in. steel ball bearing roller. Adjustable diecast housing assembly. Used by Fleetwood, Full view and a variety of other glass door manufacturers. | Prime-Line Roller Assembly, 1-1/4 in. Steel Ball... more | go to store |
Ads related to 3 doors wooden glass door