You're in Home Hardware
See Matches in:
Narrow Search Results
Price Range
By Brand
By Seller
By Keyword
Best Seller | 131476 1-1/4 In. Steel Bearing Sliding Door Assembly (Single Pack) Used by Air ntrol Howmet Krestmark and a variety of other sliding patio door manufacturers 1/4-20 threaded mounting hole on the back end and an optional use 10-32 threaded hole on the top of the housing 1-1/4 inch ncave bearing steel Made of stamped... more | FREE shipping go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... more | go to store |
This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... more | go to store |
8mm Shaft Hole 32mm Dia Bearing Steel U Groove Sliding Door Roller - 32x7.9mm Material: Bearing Steel; Surface Treatment: Zinc Plated Groove Type: U Groove; Groove Width: 6.5mm / 0.26 inch Shaft Hole Diameter: 8mm / 0.31 inch; Overall Size: 32x7.9mm / 1.26x0.31 inch (Dia. x Thickness) DIY gadgets for you to build a camera track… more | FREE shipping go to store |
131476 1-1/4 In. Steel Bearing Sliding Door Assembly (Single Pack) Used by Air ntrol Howmet Krestmark and a variety of other sliding patio door manufacturers 1/4-20 threaded mounting hole on the back end and an optional use 10-32 threaded hole on the top of the housing 1-1/4 inch ncave bearing steel Made of stamped... more | FREE shipping go to store |
131476 1-1/4 In. Steel Bearing Sliding Door Assembly (Single Pack) Used by Air ntrol Howmet Krestmark and a variety of other sliding patio door manufacturers 1/4-20 threaded mounting hole on the back end and an optional use 10-32 threaded hole on the top of the housing 1-1/4 inch ncave bearing steel Made of stamped... more | FREE shipping go to store |
D 1762 1-1/4 In. Steel Bearing Sliding Door Assembly For -Air Doors (Single Pack) Used by -Air and a variety of other sliding patio door mafacturers Threaded mounting hole on back end 1-1/4 inch concave bearing Steel housing and bearing Easy to install more | FREE shipping go to store |
D 1762 1-1/4 In. Steel Bearing Sliding Door Assembly For -Air Doors (Single Pack) Used by -Air and a variety of other sliding patio door mafacturers Threaded mounting hole on back end 1-1/4 inch concave bearing Steel housing and bearing Easy to install more | FREE shipping go to store |
D 1762 1-1/4 In. Steel Bearing Sliding Door Assembly For -Air Doors (Single Pack) Used by -Air and a variety of other sliding patio door mafacturers Threaded mounting hole on back end 1-1/4 inch concave bearing Steel housing and bearing Easy to install more | FREE shipping go to store |
D 1762 1-1/4 In. Steel Bearing Sliding Door Assembly For -Air Doors (Single Pack) Used by -Air and a variety of other sliding patio door mafacturers Threaded mounting hole on back end 1-1/4 inch concave bearing Steel housing and bearing Easy to install more | FREE shipping go to store |
Product Description Easy to Install: Drill two holes and use two screws to install the handle and finger pull. Wide Application: It can be installed on various materials such as wooden doors glass doors or aluminum doors. Also it can be used for... more | FREE shipping go to store |
CRL D1882 1-1/4 Tandem Steel Ball Bearing Sliding Glass Door Roller with 11/16 Wide Housing This CRL Sliding Glass Door Tandem Roller Assembly has a 11/16 (17.5 mm) wide 1-3/16 (30 mm) tall adjustable steel housing assembly with inverted screw tabs which have screw holes 5-3/4 (146 mm) on center. The assembly fits on doors by several patio... more | go to store |
Sliding Glass Door Roller Assembly 1-1/4 Steel Ball Bearing Roller Each 1-1/4 Sliding door roller assembly. Steel ball bearing roller in adjustable 2-5/8 L x 1-3/8 H x 3/4 diameter steel housing with 10-32 machine thread hole on top center and 1/4-20 side threads for mounting. Roller assembly with 1-1/4 diameter wheel;... more | go to store |
D 1831 1-1/2 In. Steel Bearing Sliding Door Assembly (Single Pack) Used by a variety of sliding patio door manufacturers Plain back housing with 1/4-20 threaded mounting hole on back 1-1/2 inch diameter concave steel Stamped steel housing with bearing Features rear adjustment more | FREE shipping go to store |
D 1831 1-1/2 In. Steel Bearing Sliding Door Assembly (Single Pack) Used by a variety of sliding patio door manufacturers Plain back housing with 1/4-20 threaded mounting hole on back 1-1/2 inch diameter concave steel Stamped steel housing with bearing Features rear adjustment more | FREE shipping go to store |
D 1831 1-1/2 In. Steel Bearing Sliding Door Assembly (Single Pack) Used by a variety of sliding patio door manufacturers Plain back housing with 1/4-20 threaded mounting hole on back 1-1/2 inch diameter concave steel Stamped steel housing with bearing Features rear adjustment more | FREE shipping go to store |
D 1831 1-1/2 In. Steel Bearing Sliding Door Assembly (Single Pack) Used by a variety of sliding patio door manufacturers Plain back housing with 1/4-20 threaded mounting hole on back 1-1/2 inch diameter concave steel Stamped steel housing with bearing Features rear adjustment more | FREE shipping go to store |
Prime-Line D 1594 Steel Ball Bearing Sliding Patio Door Roller Assembly 1-1/2 In. - Quantity 6 Back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more | FREE shipping go to store |
Sliding Glass Door Roller Assembly 1-1/2 Steel Ball Bearing Roller Each Sliding glass door roller assembly; 1-1/2 steel ball bearing roller with adjustable steel housing assembly. Housing dimensions: thickness 11/16 ; length 2-7/16 ; height 1-1/8 ; overall 3/4 . Hole on top of housing is 10-32 machine thread. Use with... more | go to store |
This is a Truth Ellipse series left-handed dyad operator with a baked enamel white finish. It is made of heavy-duty diecast zinc. The steel arm, worm drive and gears are protected with a corrosive resistant finish and it opens to a full 90 degrees.... more | FREE shipping go to store |
This is a combination of a 1-1/4 in. diameter steel concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole ,and a combination of 5 different axle choices. Depending on the situation, you can choose to rivet the roller... more | go to store |
This is a combination of a 1-1/4 in. diameter nylon concave ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole and a combination of five different axle choices. Depending on the situation, you can choose to rivet the roller into place... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide, with a 7/8 in. flare, and is 1-9/16 in. tall. Features a rear adjusting threaded mounting hole on the back... more | go to store |
This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has the unique housing that is 15/16 in. wide and 1-5/16 in. tall. It is rear adjusting with a 10-24 threaded mounting hole and mounting... more | go to store |
This is a Truth Ellipse series left-handed Dyad operator with a baked enamel bronze finish. It is made of heavy-duty diecast zinc. The steel arm, worm drive and gears are protected with a corrosive resistant finish and it opens to a full 90 degrees.... more | FREE shipping go to store |
This is a right-handed Dyad style casement operator (1-jointed arm). The high pressure diecast zinc operator base; steel arms, hardened steel worm drive and gears; as well as the stud bracket; are all protected with the corrosive resistant E-Gard... more | FREE shipping go to store |
This is a combination of a 1-1/8 in. diameter steel concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole, and a combination of 5 different axle choices. Depending on the situation, you can choose to rivet the roller... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The housing is 3/4 in. wide with a 7/8 in. flare and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It is 9/16 in. wide with a 13/16 in. flare, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 10-32 threaded mounting hole on the... more | go to store |
This is a right-handed Dyad casement operator with a bronze finish. The actuating arm is jointed with a clip on the end that catches onto the stud bracket that fits onto the sash. Hardened steel arms, worm drive and gears are protected with a corrosive... more | FREE shipping go to store |
This is a coppertone finish left-handed, 13-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on coppertone finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a... more | FREE shipping go to store |
This is a bronze finish right-handed, 13-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on bronze finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90... more | FREE shipping go to store |
This is a Truth Ellipse series right-handed, 13-1/2 in. single arm operator with a baked enamel bronze finish. It is made of heavy-duty diecast zinc. The steel arm, worm drive and gears are protected with a corrosive resistant finish and it opens to a... more | FREE shipping go to store |
This is a Truth Ellipse series right-handed dyad operator with a baked enamel white finish. It is made of heavy-duty diecast zinc. The steel arm, worm drive and gears are protected with a corrosive resistant finish and it opens to a full 90 degrees.... more | FREE shipping go to store |
This is a Truth Ellipse series right-handed Dyad operator with a baked enamel bronze finish. It is made of heavy-duty diecast zinc. The steel arm, worm drive and gears are protected with a corrosive resistant finish and it opens to a full 90 degrees.... more | FREE shipping go to store |
This is a Truth Ellipse series left-handed, 9-1/2 in. single arm operator with a baked enamel bronze finish. It is made of heavy-duty diecast zinc. Steel arm, worm drive and gears are protected with a corrosive resistant finish and it opens to a full... more | FREE shipping go to store |
Ads related to 26 hole 1 4 drive