You're in Home Hardware
See Matches in:
Narrow Search Results
Price Range
By Brand
- Prime Line Products remove
By Keyword
Best Seller | Adjustable Sliding Patio Door Tandem Roller Assembly 1-1/4 Steel 1-11 Each Easily operate your door with the Prime-Line Products back patio door roller assembly. The housing is 11/16 in. wide and 1 in. tall with a 1/4-20 threaded mounting hole on the back. The steel construction and sleek finish make it as stylish as it is... more | go to store |
This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... more | go to store |
This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... more | go to store |
This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... more | go to store |
1 PK Prime-Line 1-1/4 In. Nylon Sliding Door Roller Set (2 Count) Combination of a 1-1/4 inch diameter nylon concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into... more | go to store |
1PACK Prime-Line 1-1/4 In. Sliding Door Roller Set (2 Count) Combination of a steel concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into place or use a roll pin... more | FREE shipping go to store |
1 PK Prime-Line 1-1/2 In. Sliding Door Roller Set (2 Count) Combination of a steel concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into place or use a roll pin... more | FREE shipping go to store |
Prime-Line D 1594 Steel Ball Bearing Sliding Patio Door Roller Assembly 1-1/2 In. - Quantity 6 Back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more | FREE shipping go to store |
Prime-Line Products D 1506 Sliding Door Roller 1-1/2-Inch Nylon Ball Bearing 2-Pack Bottom adjustment rollers with wide center groove. 1-1/2 In. nylon ball bearing rollers. Steel inner race with 1/4 In. hole.From the ManufacturerBottom adjustment rollers with wide center groove. 1-1/2 In. nylon ball bearing rollers. Steel inner race... more | $17.79 $10.50 go to store |
Prime-Line N 7527 Bypass Sliding Closet Door Guides 1-3/8-In Plastic Tan Non-Adjustable - Quantity 6 Tan sliding closet door bottom guide is constructed of plastic. These bottom guides feature a universal design and they are able to accommodate 1-3/8 in. thick by-passing closet doors. The mounting holes of these floor guides are spaced apart at 4-3/16... more | FREE shipping go to store |
Prime-Line B 552 Sliding Screen Door Roller Nylon Center Grooved 1 In. Diameter 2-Pk. - Quantity 6 2 Pack 1 In. Diameter Sliding Screen Door Nylon Center Grooved Roller. This 1 In. diameter nylon constructed wheel features a center grooved design. It has a 1/4 In. diameter hole that fits most any axle. This universal design is used by many door... more | FREE shipping go to store |
2 Pack Steel ball bearing roller features a 1 In. center grooved wheel. Also features a 1/4 In. diameter axle hole. Used by many door manufacturers. more | FREE shipping go to store |
Prime Line 13728 Sliding Glass Door Roller Assembly- - 3.5 x 3.5 x 0.32 in. Sliding Glass Door Roller Assembly.Specifications 1-1/2 in. Steel Ball Bearing Roller. Adjustable Steel Housing Assembly. Housing Dimensions: Thickness 11/16 in. Length 2-7/16 in. Height 1-1/8 in. Overall 3/4 in. Hole On Top Of Housing Is 10-32 Machine... more | FREE shipping go to store |
This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... more | go to store |
This sliding patio door keyed locking unit by Prime-Line Products is constructed of diecast and comes in a corrosion-resistant, white-painted finish. This locking device is designed to convert non-locking Prime-Line patio door handle sets (model... more | go to store |
This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. A Phillips head screwdriver will... more | go to store |
This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... more | go to store |
This handle is a gray Internal style latching patio door handle found on Viking as well as a variety of other sliding patio door manufacturers. Being one of the most common internal style latch it can be used on either right or left-handed doors. The... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... more | go to store |
This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... more | go to store |
This is a Truth Ellipse series left-handed dyad operator with a baked enamel white finish. It is made of heavy-duty diecast zinc. The steel arm, worm drive and gears are protected with a corrosive resistant finish and it opens to a full 90 degrees.... more | FREE shipping go to store |
This is a combination of a 1-1/4 in. diameter steel concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole ,and a combination of 5 different axle choices. Depending on the situation, you can choose to rivet the roller... more | go to store |
This is a combination of a 1-1/4 in. diameter nylon concave ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole and a combination of five different axle choices. Depending on the situation, you can choose to rivet the roller into place... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... more | go to store |
This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has the unique housing that is 15/16 in. wide and 1-5/16 in. tall. It is rear adjusting with a 10-24 threaded mounting hole and mounting... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide, with a 7/8 in. flare, and is 1-9/16 in. tall. Features a rear adjusting threaded mounting hole on the back... more | go to store |
This is a right-handed Dyad style casement operator (1-jointed arm). The high pressure diecast zinc operator base; steel arms, hardened steel worm drive and gears; as well as the stud bracket; are all protected with the corrosive resistant E-Gard... more | FREE shipping go to store |
This is a Truth Ellipse series left-handed Dyad operator with a baked enamel bronze finish. It is made of heavy-duty diecast zinc. The steel arm, worm drive and gears are protected with a corrosive resistant finish and it opens to a full 90 degrees.... more | FREE shipping go to store |
This is a combination of a 1-1/8 in. diameter steel concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole, and a combination of 5 different axle choices. Depending on the situation, you can choose to rivet the roller... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It is 9/16 in. wide with a 13/16 in. flare, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 10-32 threaded mounting hole on the... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The housing is 3/4 in. wide with a 7/8 in. flare and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is... more | go to store |
This is a diecast inside and outside pull. The hook latch is constructed of steel. Mounting holes are 4-15/16 in. on center. Fits 1-1/4 in. to 1-3/8 in. thick doors. | Prime-Line Diecast Hook Latch Sliding Door Handle (1 Set) in Black | 14.5 H x 4.95 W... more | FREE shipping go to store |
This is a right-handed Dyad casement operator with a bronze finish. The actuating arm is jointed with a clip on the end that catches onto the stud bracket that fits onto the sash. Hardened steel arms, worm drive and gears are protected with a corrosive... more | FREE shipping go to store |
This is a coppertone finish left-handed, 13-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on coppertone finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a... more | FREE shipping go to store |
This is a bronze finish right-handed, 13-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on bronze finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90... more | FREE shipping go to store |
This is a Truth Ellipse series right-handed, 13-1/2 in. single arm operator with a baked enamel bronze finish. It is made of heavy-duty diecast zinc. The steel arm, worm drive and gears are protected with a corrosive resistant finish and it opens to a... more | FREE shipping go to store |
This is a Truth Ellipse series right-handed Dyad operator with a baked enamel bronze finish. It is made of heavy-duty diecast zinc. The steel arm, worm drive and gears are protected with a corrosive resistant finish and it opens to a full 90 degrees.... more | FREE shipping go to store |
Ads related to 26 hole 1 4 drive