Home Hardware › Zinc › 25 lbs 60 x 80

#10 x 2 Fender Washers / Steel / Zinc / Outer Diameter: 2 / Thickness Range : .051 - .080 (Quantity: 25 Lbs about 451 pcs)

Fender Washers Used when an extra large bearing surface is required Steel Zinc Plated more

47282 Zinc Truss Head Self-Piercing Point Lath Screws #8 x 1.25-In. 1-Lb. - Quantity 1

LB 1.25 x #8 Zinc Truss Head Self-Piercing Point Lath Screw. more

#10 x 2 Fender Washers / Steel / Zinc - 25 Lb. Carton

Fastener SuperStore Offers Bulk Fender Washers - #10 x 2 / Steel / Zinc in 25 Lb. Cartons more

1/2 x 3 Fender Washers / Steel / Zinc - 25 Lb. Carton

Fastener SuperStore Offers Bulk Fender Washers - 1/2 x 3 / Steel / Zinc in 25 Lb. Cartons more

3/8 x 1 1/2 Fender Washers / Steel / Zinc - 25 Lb. Carton

Fastener SuperStore Offers Bulk Fender Washers - 3/8 x 1 1/2 / Steel / Zinc in 25 Lb. Cartons more

M20-2.5 x 70mm Hex Head Cap Screws Steel Metric Class 10.9 Zinc Yellow Plating (Quantity: 80 pcs) - Coarse Thread Metric Fully Threaded Length: 70mm Metric Thread Size: M20 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

M20-2.5 x 70mm Hex Head Cap Screws Steel Metric Class 10.9 Zinc Plating (Quantity: 80 pcs) - Coarse Thread Metric Partially Threaded 70mm Metric Thread M20 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

3PC ZoroSelect M8-1.25 x 80 mm Phillips Pan Machine Screw Zinc Plated

3PC ZoroSelect M8-1.25 x 80 mm Phillips Pan Machine Screw Zinc Plated Machine Screw Head Type Pan Material Steel Finish Zinc Plated Drive Phillips Thread Size M8 Fastener Length 80 mm Head Width 16 mm Head Height 6.15 mm Drive Size #4 Tensile Strength... more

M22-2.5 x 100mm Hex Head Cap Screws Steel Metric Class 8.8 Zinc Plating (Quantity: 80 pcs) - Coarse Thread Metric Partially Threaded Length: 100mm Metric Thread Size: M22 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M18-2.5 x 100mm Hex Head Cap Screws Steel Metric Class 8.8 Zinc Plating (Quantity: 80 pcs) - Coarse Thread Metric Fully Threaded Length: 100mm Metric Thread Size: M18 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M20-2.5 x 80 mm Hex Cap Screws / Grade 8.8 / Zinc / Partial Thread / DIN931 - 40 Piece Carton

Fastener SuperStore Offers Bulk Hex Cap Screws - M20-2.5 x 80 mm / Grade 8.8 / Zinc / Partial Thread / DIN931 in 40 Pc. Cartons more

M8-1.25 x 20mm Machine Screws / Phillips / Pan Head / Steel / Zinc Plating (Quantity: 80 pcs)

Thread Diameter - Pitch: M8-1.25 Length: 20mm Phillips pan heads have a rounded top cylindrical sides and a flat bearing surface. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can... more

M20-2.5 x 80 mm Hex Cap Screws / Grade 8.8 / Zinc / Full Thread / DIN933 - 40 Piece Carton

Fastener SuperStore Offers Bulk Hex Cap Screws - M20-2.5 x 80 mm / Grade 8.8 / Zinc / Full Thread / DIN933 in 40 Pc. Cartons more

M20-2.5 x 70mm Hex Head Cap Screws Steel Metric Class 10.9 Zinc Plating (Quantity: 80 pcs) - Coarse Thread Metric Fully Threaded 70mm Metric Thread M20 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

Timco - Helical Flat Roof Fixing - Zinc (Size 8.0 x 250 - 25 Pieces)

Hammer driven fixing frequently used for securing structural 6mm plywood composite insulation board to flat roofing systems. Manufactured from zinc plated high tensile steel the fixing twists into timber without the need for pre-drilling. Diameter mm -... more

1.25 mm Pitch M8 x 80 mm Threaded Rod Color Zinc-Plated Threaded Rods Screw Rods for Maintenance of Various Applications

Colour: as shown Material: metal Package Contents: 30 * Threaded rod Only the above package content other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real... more

M22-2.5 x 90mm Hex Head Cap Screws Steel Metric Class 8.8 Zinc Plating (Quantity: 80 pcs) - Coarse Thread Metric Fully Threaded 90mm Metric Thread M22 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M20-2.5 x 60mm Hex Head Cap Screws Steel Metric Class 10.9 Zinc Yellow Plating (Quantity: 80 pcs) - Coarse Thread Metric Partially Threaded Length: 60mm Metric Thread Size: M20 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

916302 M8-1.25 x 80 mm Metric Fine Steel Hex Cap Screws - Zinc Plated Steel

Hex cap screws are essential for various construction and repair projects. The 916302 M8-1.25 x 80 mm Metric Fine Steel Hex Cap Screws are designed to provide reliable fastening solutions. These screws are made of durable zinc plated steel ensuring... more

Timco - Helical Flat Roof Fixing - Zinc (Size 8.0 x 195 - 25 Pieces)

Hammer driven fixing frequently used for securing structural 6mm plywood composite insulation board to flat roofing systems. Manufactured from zinc plated high tensile steel the fixing twists into timber without the need for pre-drilling. Diameter mm -... more

Socket Head Cap Screws DIN 912 | Alloy Steel | Metric Class 12.9 | Zinc Plated | Thread Diameter: M5-0.80 x Length: 160mm (Carton Size: 25) Coarse Thread | Partially Threaded

Thread Size: M5 x Thread Pitch: 0.80 Length of Screw: 160mm Measured from under head to tip of screw Material: Metric Class 12.9 Alloy Steel with Zinc Plating more

M18-2.5 x 90mm Hex Head Cap Screws Steel Metric Class 8.8 Zinc Plating (Quantity: 80 pcs) - Coarse Thread Metric Partially Threaded Length: 90mm Metric Thread Size: M18 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M20-2.5 x 60mm Hex Cap Screws Metric Class 8.8 Zinc Plated Steel (Quantity: 80) Coarse Thread (UNC) Partially Threaded

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M8-1.25 x 80 mm Hex Cap Screws / Grade 8.8 / Zinc / Partial Thread / DIN931 - 200 Piece Carton

Fastener SuperStore Offers Bulk Hex Cap Screws - M8-1.25 x 80 mm / Grade 8.8 / Zinc / Partial Thread / DIN931 in 200 Pc. Cartons more

M20-2.5 x 65mm Hex Cap Screws Metric Class 10.9 Zinc Yellow Plated Steel (Quantity: 80) Coarse Thread (UNC) Partially Threaded

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

Timco - Coach Screws - Hex - Zinc (Size 12.0 x 80 - 25 Pieces)

A traditional heavy duty woodscrew mainly used for timber to timber applications attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the... more

M20-2.5 x 65mm Hex Cap Screws Metric Class 8.8 Zinc Plated Steel (Quantity: 80) Coarse Thread (UNC) Partially Threaded

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M20-2.5 x 75mm Hex Cap Screws Metric Class 8.8 Zinc Plated Steel (Quantity: 80) Coarse Thread (UNC) Fully Threaded

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M20-2.5 x 70 mm Hex Cap Screws / Grade 8.8 / Zinc / Full Thread / DIN933 - 80 Piece Carton

Fastener SuperStore Offers Bulk Hex Cap Screws - M20-2.5 x 70 mm / Grade 8.8 / Zinc / Full Thread / DIN933 in 40 Pc. Cartons more

M20-2.5 x 70mm Hex Head Cap Screws Steel Metric Class 8.8 Zinc Plating (Quantity: 80 pcs) - Coarse Thread Metric Fully Threaded Length: 70mm Metric Thread Size: M20 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M8-1.25 x 40mm Machine Screws / Phillips / Flat Head / Steel / Zinc Plating (Quantity: 80 pcs)

Thread Diameter - Pitch: M8-1.25 Length: 40mm The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener... more

M8 x 1.25 x 60 MM (PT) Coarse Thread DIN 603 Class 4.6 Carriage Bolt Low Carbon Steel Zinc Plated Pk 50

PRODUCT SPECIFICATIONS Part #: 0000-117396 Fastener Type: Carriage Bolt Size Description: M8 x 1.25 x 60 MM (PT) Diameter/Nominal Size: M8 Length: 60 MM Thread Pitch: 1.25 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage: Partial... more

M8 x 1.25 x 60 MM (PT) Coarse Thread DIN 931 / ISO 4014 Class 8.8 Hex Cap Screw (Bolt) Medium Carbon Steel Zinc Plated Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-117056 Fastener Type: Hex Cap Screw (Bolt) Size Description: M8 x 1.25 x 60 MM (PT) Diameter/Nominal Size: M8 Length: 60 MM Thread Pitch: 1.25 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage:... more

M12 x 1.75 x 60 MM (PT) Coarse Thread DIN 603 Class 4.6 Carriage Bolt Low Carbon Steel Zinc Plated Pk 25

PRODUCT SPECIFICATIONS Part #: 0000-122012 Fastener Type: Carriage Bolt Size Description: M12 x 1.75 x 60 MM (PT) Diameter/Nominal Size: M12 Length: 60 MM Thread Pitch: 1.75 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage: Partial... more

M10 x 1.50 x 60 MM (FT) Coarse Thread DIN 933 Class 8.8 Hex Cap Screw (Bolt) Medium Carbon Steel Zinc Plated Pk 25

PRODUCT SPECIFICATIONS Part #: 0000-119618 Fastener Type: Hex Cap Screw (Bolt) Size Description: M10 x 1.50 x 60 MM (FT) Diameter/Nominal Size: M10 Length: 60 MM Thread Pitch: 1.50 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage: Full... more

M10 x 1.25 x 60 (FT) Fine Thread DIN 933 Class 8.8 Hex Cap Screw (Bolt) Medium Carbon Steel Zinc Plated Pk 10

PRODUCT SPECIFICATIONS Part #: 0000-195945 Fastener Type: Hex Cap Screw (Bolt) Size Description: M10 x 1.25 x 60 (ft) Diameter/Nominal Size: M10 Length: 60 Thread Pitch: 1.25 Thread Pitch Type: Fine Thread Direction: Right Thread Coverage: Full System... more

M12 x 1.75 x 60 MM (PT) Coarse Thread DIN 931 Class 8.8 Hex Cap Screw (Bolt) Medium Carbon Steel Zinc Plated Pk 25

PRODUCT SPECIFICATIONS Part #: 0000-121744 Fastener Type: Hex Cap Screw (Bolt) Size Description: M12 x 1.75 x 60 MM (PT) Diameter/Nominal Size: M12 Length: 60 MM Thread Pitch: 1.75 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage:... more

M8 x 1.25 x 60 MM (PT) Coarse Thread DIN 603 Class 4.6 Carriage Bolt Low Carbon Steel Zinc Plated Pk 150

PRODUCT SPECIFICATIONS Part #: 0000-117396 Fastener Type: Carriage Bolt Size Description: M8 x 1.25 x 60 MM (PT) Diameter/Nominal Size: M8 Length: 60 MM Thread Pitch: 1.25 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage: Partial... more