Home Hardware › 1 panel mira solid hunter

Dangoodbuy - Push-in Rubber Grommet - SBR Rubber- Fits Panel Hole 1 3/8 Inch Inner Diameter 1 Fits Panel Thickness 3/32 - 2 pack

dangoodbuy Large Rubber Grommets Quantity 2 grommets per package. Inner Diameter 1 Outer Diameter 1 3/4 Overall Thickness 3/8 For Panel Thickness 3/32 For Panel Hole Diameter 1 3/8 Used to insulate and seal around holes cut in solid panels. Used to... more

SQUARE D 9991UE1 Steel Enclosure, 5.28 in H, 4 in W, 3.31 in D, 1, Screw On

Enclosure NEMA Rating 1, Material of Enclosure Steel, 4 in, Screw On Enclosure Cover Type, Solid / Clear Cover Solid, Closure Method Screws, Finish Paint, Color Gray, Depth 3.31 in, Enclosure Cover Features Screw Latch, Height 5.28 in, Interior Panel... more

Standard Door - SARTODOORS Modern Solid Interior Door w/ Handle | Planum 0010 | Single Regural Panel Frame Trims | Bathroom Bedroom Sturdy Doors Manufactured Wood | Wayfair

SET INCLUDES: Door Slab, thickness 1 9/16" Trims Jamb Hinges Passage Handle Door made of solid pine Wood with honecomb with honeycomb and eco-veneer coating. Door is not pre-cutted for the hardware and not pre-attached to the frame. Assembly of frames... more

Standard Door - SARTODOORS Modern Solid Interior Door w/ Handle | Planum 0010 | Single Regural Panel Frame Trims | Bathroom Bedroom Sturdy Doors Manufactured Wood | Wayfair

SET INCLUDES: Door Slab, thickness 1 9/16" Trims Jamb Hinges Passage Handle Door made of solid pine Wood with honecomb with honeycomb and eco-veneer coating. Door is not pre-cutted for the hardware and not pre-attached to the frame. Assembly of frames... more

Standard Door - SARTODOORS Modern Solid Interior Door w/ Handle | Planum 0010 | Single Regural Panel Frame Trims | Bathroom Bedroom Sturdy Doors Manufactured Wood | Wayfair

SET INCLUDES: Door Slab, thickness 1 9/16" Trims Jamb Hinges Passage Handle Door made of solid pine Wood with honecomb with honeycomb and eco-veneer coating. Door is not pre-cutted for the hardware and not pre-attached to the frame. Assembly of frames... more

Rubber Grommet Fits 1 3/4 Hole in 1/8 Thick Panel Buna-N Rubber - Has 1 1/2 Center Hole (1)

Large Rubber Grommet For 1/8 Panel Thickness --- Inner Diameter 1 1/2 --- Outer Diameter 2 1/8 --- Overall Thickness 1/2 --- For Panel Thickness 1/8 --- For Panel Hole Diameter 1 3/4 --- --- Used to Insulate and seal around holes cut in solid panels... more

Rubber Grommet Fits 1 3/4 Hole in 1/8 Thick Panel Buna-N Rubber - Has 1 1/2 Center Hole (12)

Large Rubber Grommet For 1/8 Panel Thickness --- Inner Diameter 1 1/2 --- Outer Diameter 2 1/8 --- Overall Thickness 1/2 --- For Panel Thickness 1/8 --- For Panel Hole Diameter 1 3/4 --- --- Used to Insulate and seal around holes cut in solid panels... more

Rubber Grommet Fits 1 3/8 Hole in 1/8 Thick Panel Has 1 Inner Diameter Hole (1)

Inner Diameter 1 Outer Diameter 1 3/4 Overall Thickness 1/2 For Panel Thickness 1/8 For Panel Hole Diameter 1 3/8 Used to Insulate and seal around holes cut in solid panels Also Used to dampen vibration and minimize abrasion. Durometer hardness - 55A.... more

Rubber Grommet Fits 1 3/4 Hole in 1/8 Thick Panel Buna-N Rubber - Has 1 1/2 Center Hole (6)

Large Rubber Grommet For 1/8 Panel Thickness --- Inner Diameter 1 1/2 --- Outer Diameter 2 1/8 --- Overall Thickness 1/2 --- For Panel Thickness 1/8 --- For Panel Hole Diameter 1 3/4 --- --- Used to Insulate and seal around holes cut in solid panels... more

Rubber Grommet Fits 1 3/4 Hole in 1/8 Thick Panel Buna-N Rubber - Has 1 1/2 Center Hole (24)

Large Rubber Grommet For 1/8 Panel Thickness --- Inner Diameter 1 1/2 --- Outer Diameter 2 1/8 --- Overall Thickness 1/2 --- For Panel Thickness 1/8 --- For Panel Hole Diameter 1 3/4 --- --- Used to Insulate and seal around holes cut in solid panels... more

Rubber Grommet Fits 1 3/4 Hole in 1/8 Thick Panel Buna-N Rubber - Has 1 1/2 Center Hole (100)

Large Rubber Grommet For 1/8 Panel Thickness --- Inner Diameter 1 1/2 --- Outer Diameter 2 1/8 --- Overall Thickness 1/2 --- For Panel Thickness 1/8 --- For Panel Hole Diameter 1 3/4 --- --- Used to Insulate and seal around holes cut in solid panels... more

Long Adjustable Solid Zinc Curtain Rod Bracket Wall Holder Fits To 1 1-1/8 And 1-1/4 Rod 2 Pieces - Brushed/Stainless Steel

FEATURE:Heavy Duty Adjustable Rustproof Long Window Curtain Panel Rod Bracket Holder HIGH-QUALITY METAL:This Heavy Duty Curtain Rod Bracket is made of 100% Zinc capable of sturdy holding curtain rod with panel with 11 lbs for each bracket. SIZE:This... more

Rubber Grommet Fits 1 3/8 Hole in 1/8 Thick Panel Has 1 Inner Diameter Hole (6)

Inner Diameter 1 Outer Diameter 1 3/4 Overall Thickness 1/2 For Panel Thickness 1/8 For Panel Hole Diameter 1 3/8 Used to Insulate and seal around holes cut in solid panels Also Used to dampen vibration and minimize abrasion. Durometer hardness - 55A.... more

Rubber Grommet Fits 1 3/8 Hole in 1/8 Thick Panel Has 1 Inner Diameter Hole (24)

Inner Diameter 1 Outer Diameter 1 3/4 Overall Thickness 1/2 For Panel Thickness 1/8 For Panel Hole Diameter 1 3/8 Used to Insulate and seal around holes cut in solid panels Also Used to dampen vibration and minimize abrasion. Durometer hardness - 55A.... more

Rubber Grommet Fits 1 3/8 Hole in 1/8 Thick Panel Has 1 Inner Diameter Hole (12)

Inner Diameter 1 Outer Diameter 1 3/4 Overall Thickness 1/2 For Panel Thickness 1/8 For Panel Hole Diameter 1 3/8 Used to Insulate and seal around holes cut in solid panels Also Used to dampen vibration and minimize abrasion. Durometer hardness - 55A.... more

Rubber Grommet Fits 1 3/8 Hole in 1/8 Thick Panel Has 1 Inner Diameter Hole (2)

Inner Diameter 1 Outer Diameter 1 3/4 Overall Thickness 1/2 For Panel Thickness 1/8 For Panel Hole Diameter 1 3/8 Used to Insulate and seal around holes cut in solid panels Also Used to dampen vibration and minimize abrasion. Durometer hardness - 55A.... more

Rubber Grommet Fits 1/2 Hole in 1/16 Thick Panel - 5/16 Center Hole - SBR Rubber Grommet - Protects Wires and Tubing - Dampens Vibration (6)

Rubber Grommet --- Inner Diameter 5/16 --- Outer Diameter 5/8 --- Overall Thickness 1/4 --- For Panel Thickness 1/16 --- For Panel Hole Diameter 1/2 --- Used to Insulate and seal around holes cut in solid panels --- Also Used to dampen vibration and... more

Rubber Grommet Fits 1/2 Hole in 1/16 Thick Panel - 5/16 Center Hole - SBR Rubber - Protects Wires and tubing - Dampens Vibration (50)

Rubber Grommet --- Inner Diameter 5/16 --- Outer Diameter 5/8 --- Overall Thickness 1/4 --- For Panel Thickness 1/16 --- For Panel Hole Diameter 1/2 --- Used to Insulate and seal around holes cut in solid panels --- Also Used to dampen vibration and... more

Set of 12 Cast Brass Standoff Screws 1/2 x 3/4 Polished Gold Finish For Mounting A Sign Panel (SO1319G)

Use these solid brass standoff screws or signage fasteners to create a sleek three-dimensional sign display without using a frame. These standoffs are secured through the sign rather than holding it against the wall. The solid brass construction is... more

Brushed No-Drill Fixed Panel Glass Clamp For 1/4 Glass

Made of Solid Brass No Glass Fabrication Required Includes Clear Gaskets and Mounting Screws No-Drill Fixed Panel Clamps Allow Securing of Fixed Panels of Glass But Under Certain Circumstances Use Monolithic Tempered Glass more

UHUSE Gear Position Panel Button Knob Blue Cover For BMW 1 2 3 4 Series F20/22 F30 F32

Item Details: * High-quality new products. * Perfectly match with your original car. Perfect to replace old & broken Buttons . * Made of plastic durable and eco-friendly. Upgraded design More Solid Not easy to break Replace perfectly. * Advanced... more

Rubber Grommet Fits 1 Hole in 3/16 Thick Panel SBR Rubber - Has 3/4 Center Hole (12)

Inner Diameter 3/4 Outer Diameter 1 1/4 Overall Thickness 9/16 For Panel Thickness 3/16 For Panel Hole Diameter 1 Used to Insulate and seal around holes cut in solid panels Also Used to dampen vibration and minimize abrasion. Durometer hardness - 60A.... more

100FD484 Bi-Fold Door 4-Panel Hdwr Set 48 in.

Features For door panels 1-1/8 in. to 1-3/4 in. thick. 24 in. x 108 in. wide. Weighing up to 75 pounds per panel. Designed to carry heavy solid core doors. Patented tricycle hangers with large ball bearing wheels. ride smoothly and quietly on convex... more

CRL Gold Plated Square Hole-In-Glass Fixed Panel U-Clamp

Use Monolithic Tempered Glass A Nice Option to More Traditional U-Channel in that the Clamps Help the Appearance of an All-Glass Look For 5/16 to 1/2 (8 to 12 mm) Glass Glass Fabrication Required to Accommodate Clamps Solid Brass more

CRL Square Style Hole-In-Glass Fixed Panel U-Clamp

Use Monolithic Tempered Glass Glass Fabrication Required to Accommodate Clamps Solid Brass A Nice Option to More Traditional U-Channel in that the Clamps Help the Appearance of an All-Glass Look For 5/16 to 1/2 (8 to 12 mm) Glass more

SCU4CH - CRL Chrome Square Hole-In-Glass Fixed Panel U-Clamp

For 5/16 to 1/2 (8 to 12 mm) GlassUsed to Secure Fixed Panels of Glass for Frameless Shower Enclosures Solid BrassA Nice Option to More Traditional U-Channel in that the Clamps Help the Appearance of an All-Glass Look Glass Fabrication Required to... more

SCU4CH - CRL Chrome Square Hole-In-Glass Fixed Panel U-Clamp

For 5/16 to 1/2 (8 to 12 mm) GlassUsed to Secure Fixed Panels of Glass for Frameless Shower Enclosures Solid BrassA Nice Option to More Traditional U-Channel in that the Clamps Help the Appearance of an All-Glass Look Glass Fabrication Required to... more

CRL MC112BN Brushed Nickel Solid Brass Mini Mall Front Clamp

CRL Mini Mall Front Clamps are used to join vertical glass panels. They make it more difficult to pinch fingers or clothing between glass panels. Mini Mall Clamps will work with 3/8 to 1/2 (10 to 12 mm) thick tempered glass and are easy-to-install. The... more

CRL MC112BR Brass Solid Brass Mini Mall Front Clamp

CRL Mini Mall Front Clamps are used to join vertical glass panels. They make it more difficult to pinch fingers or clothing between glass panels. Mini Mall Clamps will work with 3/8 to 1/2 (10 to 12 mm) thick tempered glass and are easy-to-install. The... more

0.31 x 4 in. S Hook Large End

S-Hooks are a intended for hanging heavy signs and are often used in combination with our jack chain. S-Hooks are also ideal for connecting multiple sign panels one above another and are well suited for long term and short term sign installations.This... more

CRL NDC12BR Polished Brass No-Drill Clamp For 1/2 Glass

No-drill fixed panel clamps allow securing of fixed panels of glass but under certain circumstances Intended for use with monolithic tempered glass Made of solid brass to ensure years of long-lasting performance Easy installation with no glass... more

CRL EH35 Brushed Nickel Double Set Screw Clamp for 1/4 to 5/16 Glass

CRL Double Set Screw Glass Clampsare designed to mount glass just about anywhere. With double plastic tipped set screws this solid brass Clamp has the strength to support larger panels. Typical applications include connecting panels for railing systems... more

CRL EH34 Chrome Double Set Screw Clamp for 1/4 to 5/16 Glass

CRL Double Set Screw Glass Clampsare designed to mount glass just about anywhere. With double plastic tipped set screws this solid brass Clamp has the strength to support larger panels. Typical applications include connecting panels for railing systems... more

1 PK Prime-Line Frameless Shower Door Oval Roller Assembly

Extruded aluminum bracket with glazing vinyl. Accepts up to 1/4 In. thick panels 3/4 In. outer diameter with an oval edge nylon ball bearing roller. Used on solid glass panels with no frame. This 2-piece assembly clamps onto the top of the shower door... more

CRL EH22 Chrome Set Screw Clamp for 3/16 to 1/4 Glass - pack of 10

CRL Set Screw Glass Clamps are designed to attach glass without having to drill holes in the panels. These solid brass Clamps can be used for a variety of glass applications. It is recommended that these Clamps be attached into wall studs or a wood... more

CRL GCB6235GP Gold Plated Junior 135 Degree Cathedral Style Glass Clamp for 1/4 Glass

These CRL 135 Degrees Glass Clamps are designed to clamp glass panels that meet at a 135 degree angle. SPECIFICATIONS: Material: Solid Brass Glass Thickness Range: 1/4 (6 mm) Holes Required: Two 5/8 or 3/4 (16 or 19 mm) Each Panel Includes: Gaskets... more

CRL EH23 Brushed Nickel Set Screw Clamp for 3/16 to 1/4 Glass - pack of 10

CRL Set Screw Glass Clamps are designed to attach glass without having to drill holes in the panels. These solid brass Clamps can be used for a variety of glass applications. It is recommended that these Clamps be attached into wall studs or a wood... more

CRL GCB6235CH Chrome Junior Cathedral Series 135 Degree Glass Clamp for 1/4 Glass

These CRL 135 Degrees Glass Clamps are designed to clamp glass panels that meet at a 135 degree angle. SPECIFICATIONS: Material: Solid Brass Glass Thickness Range: 1/4 (6 mm) Holes Required: Two 5/8 or 3/4 (16 or 19 mm) Each Panel Includes: Gaskets... more