You're in Home Hardware
See Matches in:
Narrow Search Results
Price Range
By Brand
- Prime Line Products remove
By Material
By Home Hardware Types
By Home Hardware Features
By Keyword
Best Seller | Prime-Line 9062317 Carriage Bolts 1/4 in.-20 X 2 in. Grade 18-8 Stainless Steel 25-Pack Carriage bolts feature a slightly rounded head and have no exposed sharp edges when fully fastened. Due to that reason they are often used when a more aesthetic look is desired. They are commonly used on docks and on playground equipment or in cases... more | $28.08 $24.93 go to store |
| These wall stops are constructed of stainless steel covers, steel retainer plates and protruding concave rubber bumpers. The steel covers come in a brushed finish and the rubber bumpers are gray in color. The covers and bumpers attach to the retainer... more | go to store |
| These one ear wall brackets are constructed of 18 GA. continuous roll-formed stainless steel material and come with an inside width of 1-1/4 inch, designed for installations of 1-1/4 inch thick panels. They ship with a peel-away plastic liner to... more | FREE shipping go to store |
| This is a stainless steel S-tab tandem roller assembly used by Fleetwood and a variety of patio door manufacturers. It has an stainless steel inner housing with two inline 1-1/2 in. concave or grooved stainless steel ball bearing rollers set in a... more | go to store |
| Prime-Line 9077422 Acorn Cap Nuts 1/4 in.-20 Grade 18-8 Stainless Steel 25-Pack Cap nuts or acorn nuts are hex nuts with a domed top. They cover the end of the bolt tip which protects the threads and provides a finished appearance. Since protruding bolt tips can catch skin or clothing use of cap nuts can also help to prevent injury. more | $22.00 $18.01 go to store |
| Prime-Line D 1579-C 1/4 x 48 In. Stainless Steel Sliding Patio Door Repair Track (2 Pack) Prime-Line D 1579-C 1/4 x 48 In. Stainless Steel Sliding Patio Door Repair Track (2 Pack) more | $35.26 $26.81 FREE shipping go to store |
| Prime-Line 9075237 Nylon Insert Lock Nuts 1/4 In.-20 Grade 18-8 Stainless Steel (20 Pack) Prime-Line 9075237 Nylon Insert Lock Nuts 1/4 In.-20 Grade 18-8 Stainless Steel (20 Pack) Lock nuts (or locknuts) feature a nylon insert that grips onto threads and resists loosening due to vibration. It is best to only use each nut once as its holding... more | FREE shipping go to store |
| The threads on sheet metal screws are designed to pull two materials tightly together. The self drilling tip eliminates the need to drill a pilot hole. more | $21.05 $19.20 go to store |
| 1PACK Prime-Line Screen Door Tension Spring with Stainless Steel Roller (2-Pack) Tension spring roller assembly with a V spring design used by Academy & other patio door manufacturers. The roller is a 1 inch roller with a 1-3/4 inch long tension spring that is a heat treated steel spring. When installed the bent or angled flat... more | go to store |
| Prime-Line U 9254 J Mirror Hanger Clip with Screw Stainless Steel (Pack of 6) PRODUCT DESCRIPTION These mirror clips are constructed from steel and come plated in chrome. They feature a J-style design that accepts 1/4 in. thick mirrors. These clips can be used as both bottom or top hangers and come complete with fasteners clips.... more | $19.16 $17.78 go to store |
| These pilaster support brackets are constructed of stainless steel and come in a satin finish. This model features a 2-ear top bracket (U-shaped) that will hold a pilaster or partition panel of up to 1-1/4 inches thick. Partition supports of this size... more | FREE shipping go to store |
| These one-ear wall brackets are constructed of 18 GA. continuous roll-formed stainless steel material and come with an inside width of 1 inch, designed for installations of 1 inch thick panels. They ship with a peel-away plastic liner to protect their... more | FREE shipping go to store |
| This Surface Slide Latch has an offset bar and is constructed of Chrome Plated Zamak. This replacement partition hardware is used to provide security and privacy in public restroom stalls. The mounting Hole Centers at at 2-3/4 inch. 5/16 inch slide bar... more | FREE shipping go to store |
| This is a K-tab patio door roller assembly with a 1-1/4 in. concave stainless steel ball bearing roller set in a corrosion resisting aluminum housing. The T-shaped tab is simply slid up into a tee shaped receptacle in the bottom of the patio door. No... more | go to store |
| This is a stainless steel, unique housing, tandem roller assembly often found on Andersen patio doors as well as a variety of other manufacturers of wood patio doors. It has two 1-1/2 in. concave stainless steel ball bearing rollers set in a stainless... more | FREE shipping go to store |
| This sliding patio door roller assembly is constructed of stainless steel and comes with a 1-1/4 in. outside diameter, center-grooved wheel with ball bearings. The housing height is fully adjustable, with a minimum collapsed height of 1-5/16 in.. The... more | go to store |
| This is a high security latch lip strike that is constructed of stamped steel and it comes in a brass plated finish. Designed to replace a standard strike plate for maximum security. Installation of this strike strengthens a locked door with six, 3 in.... more | FREE shipping go to store |
| These two ear wall brackets are constructed of 18 GA. continuous roll-formed stainless steel material and come with an inside width of 1 inch, designed for installations of 1 inch thick panels. They ship with a peel-away plastic liner to protect their... more | FREE shipping go to store |
| M-D Door Sweep, L-Shape, M-DAluminum/Vinyl, For Sealing Between Bottom of Door and Threshold to Block Out Air and Moisture. L-shaped DCV 50 door bottom fits both doors. Seals between bottom of door and threshold to block out air and moisture. Slotted... more | go to store |
| These anchor clips are constructed of cast stainless steel and they come in a satin finish. Together they feature a 1/4 inch offset and 4 pre-punched installation mounting holes. This item includes one pair of clips; an inside and outside leaf, and... more | go to store |
| This is a 1-3/16 inch stainless steel window screen spring latch with nail. Typically these are used to hold the bottom of your window screen frame tightly to your wood framed window sill. Each pack contains 6 stainless steel screen spring latches and... more | go to store |
| This security deadbolt strike is constructed of stamped stainless steel and it comes in a satin finish. It features a 3/4 in. x 1-1/16 in. bolt opening to accommodate large bolt dimensions. This security strike is designed to replace the smaller... more | go to store |
| This security deadbolt strike is constructed of stamped stainless steel and it comes in a satin finish. It features a 3/4 in. x 1-1/16 in. bolt opening to accommodate large bolt dimensions. This security strike is designed to replace the smaller... more | go to store |
| This mini headrail bracket is constructed of stamped stainless steel and comes in a satin finish. These brackets are designed for use with 1-1/8 inch thick panels, and they are commonly used to replace broken or missing wall brackets. | Prime-Line Mini... more | go to store |
| This Surface Slide Latch has an offset bar and is constructed of Chrome Plated Zamak. This replacement partition hardware is used to provide security and privacy in public restroom stalls. The mounting Hole Centers at at 2-3/4 inch. 5/16 inch slide bar... more | go to store |
| This Surface Slide Latch has an offset bar and is constructed of Chrome Plated Zamak. This replacement partition hardware is used to provide security and privacy in public restroom stalls. The mounting Hole Centers at at 2-3/4 inch. 5/16 inch slide bar... more | go to store |
| This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of... more | FREE shipping go to store |
| This Outswing keeper is used with Slide Latch, Fits on a Square edge 3/4 inch Post, It is constructed of Satin Cast Stainless Steel, The strike keeper measures 2-1/2 inches x 1-7/16 inches x 1-7/8 inches. The mounting Holes are at 1-1/2 inches. |... more | FREE shipping go to store |
| This headrail bracket is constructed of stamped stainless steel and comes in a satin finish. These wide brackets are designed for use with 3/4 inch thick panels, and they are commonly used to replace broken, or missing wall brackets. | Prime-Line... more | go to store |
| These pilaster shoe kits are constructed of an 18 gauge steel anchor bracket and a 22 gauge, satin-finished stainless steel pilaster shoe. They feature a 3-inch tall reach and square ends. Each bracket is slotted at the horizontal base, on each end for... more | go to store |
| This pilaster (post) anchoring kit is designed for use with any post thickness. The kit includes a 5/16-18 x 3-inch hex head bolt, a slotted angle bracket, two plastic wall anchors, two 1-1/2 inch pan head fasteners, two 5/8 inch pan head, one-way... more | go to store |
Ads related to 1 75 inch 14 pack