Home Hardware › Prime Line Products › Sliding › 1 75 inch 14 pack

Prime-Line MP2082 Sliding Door Keeper Diecast Chrome Plated 1-3/4 inch Mounting Holes (single pack) 2 Piece

Prime-Line MP2082 Sliding Door Keeper Diecast Chrome Plated 1-3/4 inch Mounting Holes (single pack) 2 Piece more

Prime-Line Aluminum Tamper Resistant Sliding Window Lock, Fits 1/4 inch Track, Aluminum in Black | 5.4 H x 3.75 W x 1.05 D in | Wayfair S 4033

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator. Finish: Black | Prime-Line Aluminum Tamper Resistant Sliding Window Lock, Fits 1/4 inch... more

Prime-Line Aluminum Tamper Resistant Sliding Window Lock, Fits 1/4 inch Track, Aluminum in Black | 5.4 H x 3.75 W x 1.05 D in | Wayfair S 4033

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator. Finish: Black | Prime-Line Aluminum Tamper Resistant Sliding Window Lock, Fits 1/4 inch... more

Prime-Line 1-1/2 in. Steel, Sliding Door Roller Assembly w/ Nylon Ball Bearing (Single Pack) in Gray/White | 5.3 H x 3.75 W x 1.15 D in | Wayfair

This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... more

Prime-Line Sliding Door Handle Set With Clamp - 1 Each

This deluxe patio door lock features a 9-3/4 in. hard wood pull. The outside handle is black diecast. The clamp latch has a clamp profile of 1/4 inch and a clamp projection of 1/2 inches in the locked position. more

Prime-Line D 1579-C 1/4 x 48 In. Stainless Steel Sliding Patio Door Repair Track (2 Pack)

Prime-Line D 1579-C 1/4 x 48 In. Stainless Steel Sliding Patio Door Repair Track (2 Pack) more

Prime-Line Products D 1780 Sliding Door Tandem Roller Assembly 1-14-Inch Ball Bearing Stainless

This patio door roller is constructed from stainless steel and has tandem rollers with a diameter of 1-1/4 in. It comes affixed to an adjustable stainless steel housing assembly. This roller is perfect for use in severe weather environments.... more

Prime-Line D 1808 1-1/4 In. Steel Ball Bearing Sliding Door Tandem Roller Assembly for Milgard (Single Pack)

Prime-Line D 1808 1-1/4 In. Steel Ball Bearing Sliding Door Tandem Roller Assembly for Milgard (Single Pack) This is a plain back tandem roller assembly with two 1-1/4 inch concave steel ball bearing rollers. The stamped steel housing is adjustable.... more

Prime Line B609 11666 Sliding Screen Door Spring Tension Rollers 2 Pack Each

Key Features Heat-treated high-tension steel spring 2-1/4 in flat heat-treated steel spring 2 pack 1 inch outside diameter sliding screen door tension spring roller 2- 1/4 inch overall flat heat treated high tension spring steel fits metal industries... more

PRIME-LINE Make-2-Fit PL 14630 Corner Mount Flat Window Spring That Holds Window Screens Into Sliding (25 Pack) Zinc

PRIME-LINE Make-2-Fit PL 14630 Corner Mount Flat Window Spring That Holds Window Screens Into Sliding (25 Pack) Zinc This is a 1/4 inch x 2-3/4 inch heated-treated steel slip-in tension springs hold window screens into sliding aluminum window screen... more

1 PK Prime-Line 1-1/4 In. Nylon Sliding Door Roller Set (2 Count)

Combination of a 1-1/4 inch diameter nylon concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into... more

1 PK Prime-Line 1-1/2 In. Sliding Door Roller Set (2 Count)

Combination of a steel concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into place or use a roll pin... more

1PACK Prime-Line 1-1/4 In. Sliding Door Roller Set (2 Count)

Combination of a steel concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into place or use a roll pin... more

1 PK Prime-Line Sliding Door Handle Set With Clamp

This deluxe patio door lock features a 9-3/4 in. hard wood pull. The outside handle is black diecast. The clamp latch has a clamp profile of 1/4 inch and a clamp projection of 1/2 inches in the locked position. The handle has 4-15/16 inch mounting... more

Prime-Line B 552 Sliding Screen Door Roller Nylon Center Grooved 1 In. Diameter 2-Pk. - Quantity 6

2 Pack 1 In. Diameter Sliding Screen Door Nylon Center Grooved Roller. This 1 In. diameter nylon constructed wheel features a center grooved design. It has a 1/4 In. diameter hole that fits most any axle. This universal design is used by many door... more

Prime-Line B 548 Sliding Screen Door Roller Bolt Nut and High-Density Polyethylene Bushing 2-Pk. - Quantity 6

2 Pack Steel ball bearing roller features a 1 In. center grooved wheel. Also features a 1/4 In. diameter axle hole. Used by many door manufacturers. more

Prime Line 11116 Sliding Screen Door Bottom Roller

Sliding Screen Door Bottom Roller.Specifications 1-1/16 in. Nylon Wheel With Center Groove. Fits Air Control. Pack 2. Dimension - 0.75 x 3.88 x 3.88 in. Item Weight - 0.05 lbs.Features Sliding Screen Door Bottom Roller. 1-1/16 in. Nylon Wheel With... more

Prime Line B639 11960B Sliding Door Tension Roller Each

Key Features Heat-treated high-tension steel spring 2 rollers used by metal industries. Center grooved 1/4 inch wide steel ball bearing roller. 1-3/4 inch long high-tension heat-treated steel spring. Includes no.8 x 3/8 inch phillips sheet metal screw.... more

Prime-Line G 3004 Sliding Window Roller Assembly 7/16 In. Flat Nylon Roller 4-Pk. - Quantity 6

4 Pack Sliding Window Roller Assembly 7/16 in. Flat Nylon Roller. Flat edge suitable for use with: sliding window 7/16 in roller diameter 1/8 in roller width 1-1/2 in overall length 1/4 in overall width plastic White. This flat edge sliding window... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly (Single Pack) | 5.35 H x 3.75 W x 0.45 D in | Wayfair D 1513

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack) in Yellow | 5.35 H x 3.75 W x 0.75 D in | Wayfair D 1686

This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is... more

Prime-Line 1-1/4 in. Sliding Door Ball Bearing Roller Assembly (Single Pack), Steel in Green/Yellow | 5.4 H x 3.75 W x 0.75 D in | Wayfair D 1518

This is a K-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. The T-shaped tab (K-Tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 5/8... more

Prime-Line Steel Sliding Door Roller Tandem Assembly, 1-1/4 Inches D x 5/16 Inches W, Steel Zinc (Single Pack) in Yellow | Wayfair D 1607

This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved (center grooved) edge and features a steel inner race, steel ball bearings and a 5/16 in. roller width. The outside... more

Prime-Line 1-1/8 in. Steel, Sliding Door Roller Assembly w/ F-Tab (Single Pack) in Brown | 6.4 H x 3.75 W x 1.1 D in | Wayfair D 1699

This is an F-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack) in Green/Yellow | 6.4 H x 3.75 W x 1.05 D in | Wayfair D 1723

This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly (Single Pack) | 6.4 H x 3.75 W x 1.2 D in | Wayfair D 1728

This is a K-tab patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T shaped receptacle in the bottom of the patio door. No screws are required for installation. The housing... more

Prime-Line 1-1/2 in, Steel, Sliding Door Roller Assembly, Fleetwood & Fullview (Single Pack) in Green/Yellow | 5.35 H x 3.75 W x 1.05 D in | Wayfair

This is a plain back diecast patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a #10-32 threaded hole on... more

Prime-Line Steel Sliding Door Roller Tandem Assembly, 1-1/4 in. Diameter, Plastic, Yellow Zinc (Single Pack) | 6.38 H x 3.75 W x 1.13 D in | Wayfair

This is a plain back tandem roller assembly used by a variety of patio door manufacturers of metal or vinyl framed patio doors. It has two in-line 1-1/4 in. concave Plastic ball bearing rollers set in a stamped steel housing with rear adjustment. The... more

Prime-Line 1-1/8 in. Steel, Sliding Door Tandem Roller Assembly w/ F-Tab (Single Pack) in White | 7.4 H x 3.75 W x 1.13 D in | Wayfair D 1847

This is an F-tab tandem roller assembly with two 1-1/8 in. concave steel ball-bearing rollers installed. When the corner screw passes through the F-tab, the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more

Prime-Line International Sliding Glass Door Roller Assembly, 1-1/2 in. Nylon Ball (Single Pack) | 5.4 H x 3.75 W x 1.15 D in | Wayfair D 1789

This is a K-tab patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide... more

Prime-Line 1-1/4 in. Ball Bearing Sliding Door Tandem Roller Assembly, for Milgard (Single Pack) in Yellow | 7.4 H x 3.75 W x 1.05 D in | Wayfair

This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other vinyl patio door manufacturers. The housing is 3/4 in. wide and 1... more

Prime-Line 1-1/2 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack) in Gray | 6.4 H x 3.75 W x 1.05 D in | Wayfair D 1950

This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has the unique housing that is 15/16 in. wide and 1-5/16 in. tall. It is rear adjusting with a 10-24 threaded mounting hole and mounting... more

Prime-Line 1-1/8 in. Steel Ball Bearing Sliding Glass Door Roller Assembly (Single Pack) in Brown | 5.4 H x 3.75 W x 1.45 D in | Wayfair D 1523

This is a K-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required for installation. The housing... more

Prime-Line Steel Sliding Door Roller Tandem Assembly, 1-1/2 in. Diameter, Steel Zinc (Single Pack) in Yellow | 8.35 H x 3.75 W x 1.35 D in | Wayfair

This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved (center grooved) edge and features a steel inner race and steel ball bearings. The outside diameter of these rollers... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Roller Assembly, for Fleetwood Doors (Single Pack) in Gray | 5.4 H x 3.75 W x 1.15 D in | Wayfair

This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... more

Prime-Line 1-1/4 in. Steel, Sliding Door Tandem Roller Assembly w/ F-Tab (Single Pack) in Yellow | 7.3 H x 3.75 W x 1.05 D in | Wayfair D 1845

This is an F-tab tandem roller assembly with two 1-1/8 in. concave steel ball bearing rollers installed. When the corner screw passes through the F-tab, the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack) in Yellow | 5.4 H x 3.75 W x 1.2 D in | Wayfair D 1688

This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 9/16 in. wide with a 13/16 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting... more

Prime-Line Adjustable 1-1/2 in. Steel Sliding Patio Door Roller Assembly (Single Pack) in Brown | 6.4 H x 3.75 W x 1.15 D in | Wayfair D 1600

This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide, with a 7/8 in. flare, and is 1-9/16 in. tall. Features a rear adjusting threaded mounting hole on the back... more