You're in Home Hardware
See Matches in:
Narrow Search Results
Price Range
By Brand
- Prime Line Products remove
By Material
By Home Hardware Types
By Home Hardware Features
By Keyword
Best Seller | Prime Line B609 11666 Sliding Screen Door Spring Tension Rollers 2 Pack Each Key Features Heat-treated high-tension steel spring 2-1/4 in flat heat-treated steel spring 2 pack 1 inch outside diameter sliding screen door tension spring roller 2- 1/4 inch overall flat heat treated high tension spring steel fits metal industries... more | go to store |
This is a K-tab patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide, with a 7/8 in. flare, and is 1-9/16 in. tall. Features a rear adjusting threaded mounting hole on the back... more | go to store |
Prime-Line B 552 Sliding Screen Door Roller Nylon Center Grooved 1 In. Diameter 2-Pk. - Quantity 6 2 Pack 1 In. Diameter Sliding Screen Door Nylon Center Grooved Roller. This 1 In. diameter nylon constructed wheel features a center grooved design. It has a 1/4 In. diameter hole that fits most any axle. This universal design is used by many door... more | FREE shipping go to store |
2 Pack Steel ball bearing roller features a 1 In. center grooved wheel. Also features a 1/4 In. diameter axle hole. Used by many door manufacturers. more | FREE shipping go to store |
Prime Line 11116 Sliding Screen Door Bottom Roller Sliding Screen Door Bottom Roller.Specifications 1-1/16 in. Nylon Wheel With Center Groove. Fits Air Control. Pack 2. Dimension - 0.75 x 3.88 x 3.88 in. Item Weight - 0.05 lbs.Features Sliding Screen Door Bottom Roller. 1-1/16 in. Nylon Wheel With... more | FREE shipping go to store |
This is a K-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required for installation. The housing... more | go to store |
This is an all nylon roller assembly used on Likit patio doors. The housing is nylon with a bronze bushing axle for the 1-5/16 inch nylon roller. They are NON-ADJUSTABLE. They slide into an extruded channel inside the patio door's bottom rail. Used by... more | go to store |
This patio door handle has a black bracket with a hardwood handle attached. This surface with hook latch style is often found on older patio doors and mounts on the door's inside frame. It can be used on either right or left-handed doors. The hook... more | FREE shipping go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... more | go to store |
This is a unique housing patio door roller assembly. It is 23/32 in. wide, 1-7/8 in. tall, and 2-1/8 in. long with a 1-1/4 in. diameter steel ball-bearing roller. To install, remove the screw from the back and insert the assembly into the bottom rail... more | go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. | Prime-Line , Sliding... more | $25.80 $24.57 go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This sliding screen door handle and the latch are non-handed and used as a replacement handle set for 1/2-inch extruded and roll-formed sliding screen... more | go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame | Prime-Line Diecast,... more | go to store |
This patio sliding door lock and keeper by Prime-Line Products is excellent for either wood or aluminum door applications. It has an integration of keeper and lock for positive anti-lift protection with a plated steel hook is mounted in an... more | go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This sliding screen door handle and latch is used by Bay Mills doors, as well as a variety of other patio door manufacturers of Hat Section doors. It... more | go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This is a white sliding screen door handle and latch that is non-handed and is typically used by Superior Aluminum, and Precision doors as well as a... more | go to store |
This pull handle is constructed from wood. It features chrome plated diecast brackets with mounting holes that are 6-3/8 in. on center. Used on most flush type locks. | Prime-Line Sliding Glass Door Pull, Wood Handle, Diecast Construction, Chrome... more | go to store |
This is a keyed step-on sliding door lock. The steel bolt securely locks your door in a closed or ventilating position. Convenient foot operated design. Allows you to lock your door or open it slightly and still allow ventilation while keeping your... more | go to store |
This unique patio door handle is used by Ador/HiLite doors. It has mill finish extruded inside and outside 6 in. handles. It is non-handed and will work on either right or left-handed doors. The spring-loaded hook pins twist in tandem to lock into the... more | go to store |
This is a deadbolt used on commercial aluminum or steel doors. It is a single point lock with a pivoting laminated steel bolt. The bolt is activated by a pivoting mechanism by the key cylinder or thumb turn. It comes with a faceplate and fasteners. The... more | go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. This is a surface-mounted,... more | $31.38 $28.17 go to store |
These sliding patio door locks operate with a simple push and pull mechanism to help prevent unwanted opening of a patio sliding door. These locks are constructed of steel brackets and they feature hardened solid steel locking bolts that extend and... more | go to store |
This unique patio door handle is used by Ador/HiLite doors. It has a painted black finish extruded inside and outside 6 in. handles. It is non-handed and will work on either right or left-handed doors. The spring-loaded hook pins twist in tandem to... more | go to store |
This non-handed diecast black flush mount patio door handle with wood pull is a design that fits Croft series 301 patio doors, and a variety of other manufacturers of 7/8 in. to 1-1/8 in. thick patio doors. It comes with a shim to accommodate the... more | go to store |
This non-handed diecast chrome, flush mount, patio door handle with wood pull handle is used by Acorn, Better-Bilt and is a common and popular design that fits most doors with a cutout for a flush handle set. The mounting holes are 6-5/8 in. on center.... more | go to store |
This non-handed diecast black flush mount patio door handle is a design that fits Croft Series 301 patio doors, and a variety of other manufacturers of 7/8 in. to 1-1/8 in. thick patio doors. It comes with a shim to accommodate the thinner 7/8 in.... more | go to store |
This is a sliding patio door wood pull is designed to fit most flush lock systems. It features 2 mounting brackets that are crafted from metal for longevity and plated in chrome. The handle has a 6-5/8 in. mounting hole center. Minimum door width of... more | go to store |
Has the seal on you sliding screen door ripped or deteriorated in the sun? This sliding screen door bug seal is 84 inch long with tear strips adjustable widths from 7/8 inch to 1-3/8 inch (best results if you use a straight edge and sharp knife to cut... more | go to store |
Has your sliding screen handle broken, is it worn out, cracked, damaged or just worn out? This lever is used on a variety of patio door manufacturer's sliding screen doors. It is a diecast metal lever with a nickel finish that features a 2-1/2 inch... more | go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This sliding screen door handle and latch is non-handed and used as a replacement handle set for 1/2 inch extruded and roll-formed sliding screen doors.... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall with a 13/16 in. flare. It is rear adjusting with a 1/4-20 threaded mounting hole on... more | go to store |
This sliding screen door roller is as common roller replacement for many sliding screen doors. It is a high density polyethylene ball bearing roller with a center groove. It is 1 inch in diameter and 1/4 inch thick with a 3/16 inch axle hole. Order... more | go to store |
Has the roller on your screen door damaged or missing? This 1 inch diameter nylon constructed wheel features a center grooved design. It has a 1/4 inch diameter hole that fits most any axle. This universal design is used by many door manufacturers.... more | go to store |
This is an adjustable top hung, side mounted bracket with a 1/16 inch offset and 7/8 inch flat nylon roller used on the back of a sliding door panel. It fits 3/4 inch to 1-3/8 inch thick doors. Used by a variety of sliding closet or wardrobe doors. |... more | go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This is a white flush mounted handle and latch set used by a wide variety of sliding screen door manufacturers. It has a steel hook latch with 1 inch... more | go to store |
Has the seal on your sliding screen door ripped or deteriorated in the sun? This sliding screen door bug seal is 84 inches long with tear strips that adjust widths from 3/4 inch to 1-3/8 inch (best results if you use a straight edge and sharp knife to... more | go to store |
Ads related to 1 75 inch 14 pack