You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | This is a universal design roller. It has a 1-1/4 in. steel ball bearing roller. Adjustable diecast housing assembly. Used by Fleetwood, Full view and a variety of other glass door manufacturers. | Prime-Line Roller Assembly, 1-1/4 in. Steel Ball... ... more | go to store |
 | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door roller... ... more | go to store |
| Best Seller  | This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide, with a 7/8 in. flare, and is 1-9/16 in. tall. Features a rear adjusting threaded mounting hole on the back... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1 in. concave ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is 11/16 in. wide, 1-1/32 in. tall... ... more | go to store |
 | This is a side mounted, top hung wardrobe roller assembly with a tandem 7/8 in. convex nylon wheel for the back sliding wardrobe door. The stamped steel bracket assembly is adjustable and has an 1/2 in. offset. It is fitted onto the wardrobe front door... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and... ... more | go to store |
 | This 15/16 in. diameter roller comes affixed to an adjustable aluminum yoke. The center grooved design easily mounts to your screen door corner. It Fits Jim Walters screen and other roll-formed doors. | Prime-Line Screen Door Roller Assembly w/ 15/16... ... more | go to store |
 | This is a 1-1/4 in. steel ball bearing roller with adjustable steel housing assembly. Replaces old-style extruded aluminum assembly. 3/4 in. overall thickness at dimples. Used by International and a variety of other glass door manufacturers. |... ... more | go to store |
 | This sliding patio door roller assembly is constructed of stainless steel and comes with a 1-1/4 in. outside diameter, center-grooved wheel with ball bearings. The housing height is fully adjustable, with a minimum collapsed height of 1-5/16 in.. The... ... more | go to store |
 | This latch and keeper assembly fits onto International brand screen doors. The keeper has mounting holes 3-1/2 in. on center, and is adjustable up or down as needed. The nylon latch fits into an aluminum slide lever that is part of the sliding screen... ... more | go to store |
 | This latch and keeper assembly fits onto International brand screen doors. The keeper has mounting holes 3-1/2 in. on center, and is adjustable up or down as needed. The nylon latch fits into an aluminum slide lever that is part of the sliding screen... ... more | go to store |
 | This latch and keeper assembly fits onto International brand screen doors. The keeper has mounting holes 3-1/2 in. on center, and is adjustable up or down as needed. The nylon latch fits into an aluminum slide lever that is part of the sliding screen... ... more | go to store |
 | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This M-style tension spring roller... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other manufacturers, primarily on vinyl patio doors. The housing is... ... more | go to store |
 | This roller is constructed from steel. It comes affixed to an adjustable steel housing with an 1-1/4 in. diameter roller. Used by a variety of glass door manufacturers. | Prime-Line Sliding Door Roller Assembly, 1-1/4 in. Diameter, Steel Ball Bearing... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other vinyl patio door manufacturers. The housing is 3/4 in. wide and 1... ... more | go to store |
 | This is a reversed F-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/8 in. tall with a flare width of 13/16 in.. There are two 1-1/4 in. concave or grooved steel ball bearing rollers. Used by Fleetwood and a... ... more | go to store |
 | This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved (center grooved) edge and features a steel inner race, steel ball bearings and a 5/16 in. roller width. The outside... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
 | This is a U-back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting... ... more | go to store |
 | This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved edge and features a steel inner race, steel ball bearings and a 5/16 in. roller width. The outside diameter of these... ... more | go to store |
 | This roller is constructed from steel. It comes affixed to an adjustable steel housing. Used by Air Control, Howmet, Krestmark, and a variety of other sliding glass door manufacturers. | Prime-Line Sliding Door Roller Assembly w/ 1-1/2 in. Steel Ball... ... more | go to store |
 | Replace or repair broken or missing sliding door rollers with this Prime-Line D 1998 Steel Sliding Door Roller Assembly. The stamped steel patio door rollers replacement is adjustable. This door roller assembly is used by a variety of metal framed... ... more | go to store |
 | This is a sliding window roller assembly used as a bottom roller on heavy sliding glass windows, with an adjustable steel housing and plastic ball-bearing center grooved roller. | Prime-Line 27/32 in, Sliding Window Roller Assembly w/ Nylon Ball... ... more | go to store |
 | This mirror door roller is constructed from nylon. It comes attached to an adjustable steel housing. This type of roller fits on Contractors mirror door. | Prime-Line Mirror Door Roller Assembly, 1-7/16 in. Roller, Steel Housing & Ball Bearings | 4.65"... ... more | go to store |
 | This is a steel tandem C-tab roller assembly with 1-1/4 in. steel ball bearing rollers. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16 in.... ... more | go to store |
 | This is a B-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/16 in. tall with a flare width of 13/16 in.. The B- tab secures the assembly as the mounting screw is driven up through the B-tab hole and into the... ... more | go to store |
 | This is an adjustable diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used primarily by Canadian Patio Door Manufacturers. It's plain back diecast housing is 1/2 in. wide, 1 in. tall and 1-9/16 in. long.... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved Plastic ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable. Used by a variety of manufacturers of vinyl patio doors. The housing is 3/4 in. wide and 1 in. tall... ... more | go to store |
 | This is a side mounted, top hung wardrobe roller assembly with a single 7/8 in. convex nylon wheel for the back sliding door. The stamped steel bracket assembly is adjustable and has an 1/2 in. offset. It is fitted onto the wardrobe front door and fits... ... more | go to store |
 | This Closet Door Roller assembly is constructed from nylon. It features an adjustable top mount steel bracket that also acts as a corner bracket for steel frame bypassing doors. This style roller fits on Acme and similar styled doors. | Prime-Line... ... more | go to store |
 | Prime-Line Aluminum Screen Door Latch & Strike | 7.4" H X 3.75" W X 0.65" D | Wayfair A 140 Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This latch and keeper assembly fits onto International brand screen doors. The keeper has mounting holes 3-1/2 inch on center, and is adjustable up or... ... more | go to store |
Ads related to HHIP 3900-0302 Adjustable Clamping Assembly 1/2-13 x 4
