Micro 100 › hflwywd ghyjpajk 1 2 5

Micro 100 Cor Rad End Mill 1/2 Carb 1/8 rad VLR-500-5-060

Corner Radius End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Fractional Inch 0.06 in 1 in 6 in more

MICRO 100 CT-122 Brazed Tool Bit,CT,5 In L,1/2 In W

Single-Point Tool Bit, CT, Carbide, Zinc, Right Hand, Shank Width 1/2 in more

MICRO 100 C-5 Brazed Tool Bit,C,2-1/4 In L,5/16 In W

Single-Point Tool Bit, C, Carbide, Zinc, Neutral, Shank Width 5/16 in more

Micro 100 Thread Mill 1 2 -11.5 Carbide TM-11NPTX

Helical Thread Mill NPT Carbide AlTiN 0.6200 in more

Micro 100 Sq. End Mill Single End Carb 1/2 ASM-500-5

Square End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5/8 in Overall Length 2 1/2 in Shank Dia. 1/2 in more

Micro 100 Thread Mill 1 2 -11.5 Carbide TM-11NPT

Helical Thread Mill NPT Carbide Bright (Uncoated) 0.6200 in more

Micro 100 Square End Mill 1/32 Dia 5/64 Cut GEC-031-2-005

End Mill 1/32 in Milling Dia. Bright (Uncoated) Length of Cut 5/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0100 rad ARC-500-5-010

Corner Radius End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 1 in 3 in more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0600 rad VHSM-040-5

Corner Radius End Mill 4.00 mm Milling Dia. Carbide Bright (Uncoated) Weldon Flat Metric 0.30mm 8.00 mm 50.00 mm more

Micro 100 Threading Tool 1/2 Carbide SAT-2000-5

Threading Tool Included Angle 29 Degrees Carbide Bright (Uncoated) 0.2400 in Threading more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0300 rad VHS-312-5-020

Corner Radius End Mill 5/16 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Fractional Inch 0.02 in 1/2 in 2 1/2 in more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0300 rad VHSM-030-5

Corner Radius End Mill 3.00 mm Milling Dia. Carbide Bright (Uncoated) Weldon Flat Metric 0.30mm 6.00 mm 50.00 mm more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0600 rad VHSM-080-5

Corner Radius End Mill 8.00 mm Milling Dia. Carbide Bright (Uncoated) Weldon Flat Metric 0.50mm 16.00 mm 63.00 mm more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0900 rad VLR-375-5-020K

Corner Radius End Mill 3/8 in Milling Dia. Carbide nACRo Weldon Flat Fractional Inch 0.02 in 3/4 in 4 in more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0900 rad VHS-500-5-030

Corner Radius End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Fractional Inch 0.03 in 5/8 in 3 in more

Micro 100 Engraving Blank Carbide 1/4 QSP-250-2.5

Engraving Blank Carbide Single End 1/4 in Bright (Uncoated) Fractional Inch 0.2500 more

Micro 100 Engraving Blank Carbide 1/2 QSR-500-3.5

Engraving Blank Carbide Single End 1/2 in Bright (Uncoated) Fractional Inch 0.5000 more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0600 rad VHS-312-5-020K

Corner Radius End Mill 5/16 in Milling Dia. Carbide nACRo Weldon Flat Fractional Inch 0.02 in 1/2 in 2 1/2 in more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0900 rad VHSM-060-5

Corner Radius End Mill 6.00 mm Milling Dia. Carbide Bright (Uncoated) Weldon Flat Metric 0.50mm 10.00 mm 57.00 mm more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0900 rad VHS-375-5-020K

Corner Radius End Mill 3/8 in Milling Dia. Carbide nACRo Weldon Flat Fractional Inch 0.02 in 5/8 in 2 1/2 in more

Micro 100 CR End Mill 0.090 CR 5/8 Dia 1-1/4 Cut ARC-625-3-090

Corner Radius End Mill 5/8 in Milling Dia. Bright (Uncoated) Fractional Inch 0.090 in 1 1/4 in 3 1/2 in more

Micro 100 Sq. End Mill Single End Carb 5/64 GEM-078-2

Square End Mill 5/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Engraving Tool 5/8 L of Cut Carbide RTC-500-2

Engraving Tool Double End 30 Degrees Carbide Bright (Uncoated) Fractional Inch .004 in 1/2 in more

Micro 100 Cor Rad End Mill 5/16 Carb 0.0100 rad GEC-312-2-010

Corner Radius End Mill 5/16 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 13/16 in 2 1/2 in more

Micro 100 Sq. End Mill Single End Carb 5/16 GEM-312-2

Square End Mill 5/16 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 13/16 in Overall Length 2 1/2 in Shank Dia. 5/16 in more

Micro 100 Sq. End Mill Single End Carb 1/2 SEM-500-02X

Square End Mill 1/2 in Milling Dia. Carbide AlTiN Straight Length of Cut 5/8 in Overall Length 2 1/2 in Shank Dia. 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1.80mm RMEM-018-2

Square End Mill 1.80 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5.30 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Sq. End Mill Single End Carb 1.90mm RMEM-019-2

Square End Mill 1.90 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5.70 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Sq. End Mill Single End Carb 1.80mm AMRM-018-2

Square End Mill 1.80 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5.30 mm Overall Length 50.00 mm Shank Dia. 4.00 mm more

Micro 100 Sq. End Mill Single End Carb 1/32 EMS-031-2

Square End Mill 1/32 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 1.90mm AMRM-019-2

Square End Mill 1.90 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5.70 mm Overall Length 50.00 mm Shank Dia. 4.00 mm more

Micro 100 Sq. End Mill Single End Carb 1.70mm RMEM-017-2

Square End Mill 1.70 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5.10 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Sq. End Mill Single End Carb 1/2 ASM-500-2S

Square End Mill 1/2 in Milling Dia. Carbide ZrN Straight Length of Cut 5/8 in Overall Length 2 1/2 in Shank Dia. 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1/2 VHS-500-5K

Square End Mill 1/2 in Milling Dia. Carbide nACRo Weldon Flat Length of Cut 5/8 in Overall Length 3 in Shank Dia. 1/2 in Neck Dia. 15/32 in more

Micro 100 Cor Rad End Mill 5/16 Carb 0.0200 rad VLM-500-5-090

Corner Radius End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.09 in 1 3/4 in 4 1/2 in more

Micro 100 Cor Rad End Mill 5/32 Carb 13/64 rad VHM-750-5-125

Corner Radius End Mill 3/4 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 1/8 in 1 1/2 in 4 in more

Micro 100 Cor Rad End Mill 5/16 Carb 0.0200 rad ARC-312-5-020X

Corner Radius End Mill 5/16 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.02 in 13/16 in 2 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0200 rad VHS-250-5-020

Corner Radius End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Fractional Inch 0.02 in 1/2 in 2 1/2 in more