You're in Hunting & Archery Equipment
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | Egw 1911 Angle Bored Bushing - Wcpi Blue Pre-Fit Bushing, Govt. Less time-consuming fitting because the proper lockup angle is pre-machined right into the bushing. Pre-Fit requires only minor fitting for installation onto Colt factory barrels. Gunsmith Fit requires fitting of both dimensions. Mfg: Egw SPECS: 416... ... more | go to store |
Egw 1911 Angle Bored Bushing - Wcpi Blue Pre-Fit Bushing, Commander Less time-consuming fitting because the proper lockup angle is pre-machined right into the bushing. Pre-Fit requires only minor fitting for installation onto Colt factory barrels. Gunsmith Fit requires fitting of both dimensions. Mfg: Egw SPECS: 416... ... more | go to store |
Egw Gi Bushing Gunsmith Fit - .699 Gi Bushing Gunsmith Fit Blue The flange thickness is .92" which is the standard GI spec. Mfg: Egw ... more | go to store |
Egw Angled Bored Bushing With Carry Bevel - Carry Bevel Bushing, Govt Beveled flange looks right on X"XmeltedX"X guns. Bored at an angle to prevent barrel bind for smooth cycling. Provides a snug drop-in between barrel and bushing. Mfg: Egw SPECS: Stainless steel. .580" (14.7mm) I.D., .70" (17.8mm) O.D. ... more | go to store |
Egw 1911 Straight Bored Barrel Bushing - Straight Bored Bushing, Stainless Straight-bored bushing, CNC machined from solid bar stock and designed for hand-fitting to obtain the best accuracy. Extra thick, .125" flange extends slightly farther than the original factory bushing for maximum barrel protection. Contoured, beveled... ... more | go to store |
Egw 1911 Straight Bored Barrel Bushing - Straight Bored Bushing, Blued Straight-bored bushing, CNC machined from solid bar stock and designed for hand-fitting to obtain the best accuracy. Extra thick, .125" flange extends slightly farther than the original factory bushing for maximum barrel protection. Contoured, beveled... ... more | go to store |
Egw 1911 "melt" Bushing - 1911 Blue Melt Bushing Large flange eliminates the sharp edges and step of conventional bushings. 1911 fits Govt. Melt Bushings require a two piece guide rod set-up to disassemble your gun. The spring will need to be taken out of the back as well. The flange on the melt... ... more | go to store |
Egw Angled Bored Bushing With Carry Bevel - Carry Bevel Bushing, Commander Beveled flange looks right on X"XmeltedX"X guns. Bored at an angle to prevent barrel bind for smooth cycling. Provides a snug drop-in between barrel and bushing. Mfg: Egw SPECS: Stainless steel. .580" (14.7mm) I.D., .70" (17.8mm) O.D. ... more | go to store |
Egw Oversized 1911 Barrel Bushing - Oversized Bushing, .705, Ss Slightly oversize, machined bushings for Government Model 1911's take less time to fit because the proper lockup angle is pre-machined right into the bushing. Gunsmith fitting required. Available in Stainless Steel. Mfg: Egw SPECS: 416 Stainless steel.... ... more | go to store |
Egw 1911 "melt" Bushing - Melt Bushing Wrench Large flange eliminates the sharp edges and step of conventional bushings. 1911 fits Govt. Melt Bushings require a two piece guide rod set-up to disassemble your gun. The spring will need to be taken out of the back as well. The flange on the melt... ... more | go to store |
Nighthawk Custom 1911 Barrel Bushings - Govt. Barrel Bushing Match grade bushings machined from the same premium-grade stainless steel as Nighthawk 1911 barrels for a precision fit that improves accuracy and provides years of reliable service. I.D. and O.D. are left slightly oversized to allow custom fitting to... ... more | go to store |
Egw 1911 Auto National Match Barrel Bushing Top-quality match bushing is machined slightly oversized on the outside diameter and undersized on the inner diameter. Enables the pistolsmith to achieve the tightest possible fit between the slide, bushing, and barrel for better accuracy potential.... ... more | go to store |
Clark Custom 1911 Barrel Bushing - Standard Barrel Bushing Standard fits most barrels with only minor polishing/fitting. Fully machined. Favorite bushing of experienced pistolsmiths. Requires gunsmith fitting. Mfg: Clark Custom SPECS: .875" (22.22mm) long, .714" (18.13mm) O.D. Std, .575" (14.55mm) I.D. ... more | go to store |
Egw 1911 Guide Rods - One-Piece 1911 Tungsten Guide Rod 5" One Piece Guide Rod: Fits flush with the slide so you can turn the bushing to disassemble the gun. This guide rod also features a takedown hole. This tungsten guide rod should be checked by a gunsmith familiar with the 1911 design. It may require... ... more | go to store |
Egw 1911 Guide Rods - One-Piece Sti Tungsten Rod 5" One Piece Guide Rod: Fits flush with the slide so you can turn the bushing to disassemble the gun. This guide rod also features a takedown hole. This tungsten guide rod should be checked by a gunsmith familiar with the 1911 design. It may require... ... more | go to store |
Egw 1911 Guide Rods - Two-Piece Sti Tungsten Rod 5" One Piece Guide Rod: Fits flush with the slide so you can turn the bushing to disassemble the gun. This guide rod also features a takedown hole. This tungsten guide rod should be checked by a gunsmith familiar with the 1911 design. It may require... ... more | go to store |
Egw 1911 Long Nose Recoil Spring Plug - Long Nose Plug Solid End Blue Machined steel plug has an extended nose designed to fit flush with thicker-than-normal bushings for improved cosmetic appearance. Designed for use with EGW Thick Flange, Melt, or Carry Bevel bushings. Available in stainless or blued steel, with Solid... ... more | go to store |
Egw 1911 Long Nose Recoil Spring Plug - Long Nose Plug With End Hole Ss Machined steel plug has an extended nose designed to fit flush with thicker-than-normal bushings for improved cosmetic appearance. Designed for use with EGW Thick Flange, Melt, or Carry Bevel bushings. Available in stainless or blued steel, with Solid... ... more | go to store |
Egw 1911 Long Nose Recoil Spring Plug - Long Nose Plug With End Hole Blue Machined steel plug has an extended nose designed to fit flush with thicker-than-normal bushings for improved cosmetic appearance. Designed for use with EGW Thick Flange, Melt, or Carry Bevel bushings. Available in stainless or blued steel, with Solid... ... more | go to store |
Egw 1911 Long Nose Recoil Spring Plug - Long Nose Plug Solid End Ss Machined steel plug has an extended nose designed to fit flush with thicker-than-normal bushings for improved cosmetic appearance. Designed for use with EGW Thick Flange, Melt, or Carry Bevel bushings. Available in stainless or blued steel, with Solid... ... more | go to store |
Wilson Combat 1911 Multi-Comp - Multi-Comp Three full chambers and seven exhaust ports combine to help control recoil and muzzle climb to put you back on target faster. Installation is as easy as fitting a new barrel bushing. Fits all calibers of Govt.-length barrels with O.D. of .576" to... ... more | go to store |
Ads related to Egw 1911 Angle Bored Bushing - Wcpi S/S Gunsmith Fit Bushing, Govt.