Micro 100 › dewalt dw1634 1 1 2

Micro 100 CR End Mill 0.090 CR 1 Dia 1-1/2 Cut ARC-001-2-090S

Corner Radius End Mill 1 in Milling Dia. ZrN Fractional Inch 0.090 in 1 1/2 in 4 in more

Micro 100 Cor Rad End Mill 1/2 Carb 1/8 rad VHSM-060-5K

Corner Radius End Mill 6.00 mm Milling Dia. Carbide nACRo Weldon Flat Metric 0.50mm 10.00 mm 57.00 mm more

Micro 100 Cor Rad End Mill 1/2 Carb 1/8 rad VLR-500-5-060

Corner Radius End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Fractional Inch 0.06 in 1 in 6 in more

Micro 100 Cor Rad End Mill 1/2 Carb 1/8 rad VHS-500-5-030K

Corner Radius End Mill 1/2 in Milling Dia. Carbide nACRo Weldon Flat Fractional Inch 0.03 in 5/8 in 3 in more

Micro 100 Sq. End Mill Single End Carb 1/2 GEM-500-2

Square End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1 in Overall Length 3 in Shank Dia. 1/2 in more

Micro 100 Engraving Tool 1/2 L of Cut Carbide RTC-250-2

Engraving Tool Double End 30 Degrees Carbide Bright (Uncoated) Fractional Inch 0.0040 in 1/2 in more

Micro 100 Engraving Blank Carbide 1/2 QSP-500-2.5

Engraving Blank Carbide Single End 1/2 in Bright (Uncoated) Fractional Inch 0.5000 more

Micro 100 Ball End Mill Single End 1/2 Carbide BLR-500-2

Ball End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Non-Coolant Through more

Micro 100 Sq. End Mill Single End Carb 1/2 GEL-500-2

Square End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3 in Overall Length 6 in Shank Dia. 1/2 in more

Micro 100 Engraving Tool 1/2 L of Cut Carbide RTC-375-2

Engraving Tool Double End 30 Degrees Carbide Bright (Uncoated) Fractional Inch 0.0040 in 25/64 in more

Micro 100 Engraving Tool 1/2 L of Cut Carbide RTC-312-2

Engraving Tool Double End 30 Degrees Carbide Bright (Uncoated) Fractional Inch 0.0040 in 25/64 in more

Micro 100 Engraving Tool 1/2 L of Cut Carbide RNC-375-2

Engraving Tool Double End 90 Degrees Carbide Bright (Uncoated) Fractional Inch 0.0040 in 1/2 in more

Micro 100 Ball End Mill Single End 1/2 Carbide SBM-500-2

Ball End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Non-Coolant Through more

Micro 100 Engraving Tool 1/2 L of Cut Carbide RNC-312-2

Engraving Tool Double End 90 Degrees Carbide Bright (Uncoated) Fractional Inch 0.0040 in 1/2 in more

Micro 100 Boring Bar 1/2 Carbide QPR-180500X

Boring Bar Radial Profiling AlTiN 0.0550 in Micro-Quik Tool Holder more

Micro 100 Sq. End Mill Single End Carb 1/2 ARM-500-5

Square End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1 in Overall Length 3 in Shank Dia. 1/2 in more

Micro 100 Threading Tool 1/2 Carbide IAT-2000-6

Threading Tool Included Angle 29 Degrees Carbide Bright (Uncoated) 0.2400 in Threading more

Micro 100 Threading Tool 1/2 Carbide QIT-4602000

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.2100 in Coolant Through Threading more

Micro 100 Countersink 120 deg. 1/2 Body CS-500-120X

Countersink 120 Degrees 1/2 in Carbide TiAlN more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0200 rad ARC-500-3-030

Corner Radius End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.03 in 1 in 3 in more

Micro 100 Sq. End Mill Single End Carb 1.00mm GEMM-010-2

Square End Mill 1.00 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3.00 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Threading Tool 1/2 Carbide IT-490750

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.2400 in Threading more

Micro 100 Threading Tool 1/2 Carbide SAT-2000-6

Threading Tool Included Angle 29 Degrees Carbide Bright (Uncoated) 0.2400 in Threading more

Micro 100 Sq. End Mill Single End Carb 1.80mm RMEM-018-2

Square End Mill 1.80 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5.30 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Single-Point Tool Bit 1/2 Carbide C-500

Single-Point Tool Bit C Carbide Zinc Neutral Shank Width 1/2 in more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0300 rad VHSM-030-5

Corner Radius End Mill 3.00 mm Milling Dia. Carbide Bright (Uncoated) Weldon Flat Metric 0.30mm 6.00 mm 50.00 mm more

Micro 100 Sq. End Mill Single End Carb 1.40mm RMEM-014-2

Square End Mill 1.40 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 4.20 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Threading Tool 1/2 Carbide QIT-4601500

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.2100 in Coolant Through Threading more

Micro 100 Threading Tool 1/2 Carbide QIT-490750

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.2400 in Coolant Through Threading more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0600 rad VHSM-080-5

Corner Radius End Mill 8.00 mm Milling Dia. Carbide Bright (Uncoated) Weldon Flat Metric 0.50mm 16.00 mm 63.00 mm more

Micro 100 Sq. End Mill Single End Carb 1/32 EMS-031-2

Square End Mill 1/32 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 1/16 GEM-062-2

Square End Mill 1/16 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0900 rad VLR-375-5-020K

Corner Radius End Mill 3/8 in Milling Dia. Carbide nACRo Weldon Flat Fractional Inch 0.02 in 3/4 in 4 in more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0100 rad ARC-500-5-010

Corner Radius End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 1 in 3 in more

Micro 100 Sq. End Mill Single End Carb 1.90mm AMRM-019-2

Square End Mill 1.90 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5.70 mm Overall Length 50.00 mm Shank Dia. 4.00 mm more

Micro 100 Threading Tool 1/2 Carbide LTR-500-16

Threading Tool Carbide Bright (Uncoated) 1/4 in Thread Relief more

Micro 100 Threading Tool 1/2 Carbide QIT-460750

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.2100 in Coolant Through Threading more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0900 rad VHS-500-5-030

Corner Radius End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Fractional Inch 0.03 in 5/8 in 3 in more