Micro 100 › db350z 4 1 2 inch

Micro 100 Sq. End Mill Single End Carb 1/2 EMS-500-4

Square End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Length of Cut 1 in Overall Length 3 in Shank Dia. 1/2 in more

MICRO 100 E-5 Brazed Tool Bit,E,2-1/4 In L,5/16 In W

Single-Point Tool Bit, E, Carbide, Zinc, Shank Width 5/16 in more

MICRO 100 AL-5 Brazed Tool Bit,AL,2-1/4 In L,5/16 In W

Single-Point Tool Bit, AL, Carbide, Zinc, Left Hand, Shank Width 5/16 in more

MICRO 100 RDD-80 Router Diamond Cut

Solid Router Bit, Primary Material Application Composite, Drill Point, Fractional Inch, 1/4 in Cutter Dia. more

Micro 100 Sq. End Mill Single End Carb 1/2 GEM-500-4

Square End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1 in Overall Length 3 in Shank Dia. 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1/4 GEM-250-2

Square End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Cor Rad End Mill 1/4 Carb 0.0200 rad GEC-250-4-020X

Corner Radius End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.02 in 3/4 in 2 1/2 in more

Micro 100 Cor Rad End Mill 1/4 Carb 0.0100 rad GEC-250-4-010

Corner Radius End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 3/4 in 2 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1/4 EMS-250-4

Square End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 GEM-250-4

Square End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 CR End Mill 0.090 CR 5/8 Dia 1-1/4 Cut ARC-625-3-090

Corner Radius End Mill 5/8 in Milling Dia. Bright (Uncoated) Fractional Inch 0.090 in 1 1/4 in 3 1/2 in more

Micro 100 Engraving Tool 1/2 L of Cut Carbide RTC-375-2

Engraving Tool Double End 30 Degrees Carbide Bright (Uncoated) Fractional Inch 0.0040 in 25/64 in more

Micro 100 Engraving Tool 1/2 L of Cut Carbide RTC-312-2

Engraving Tool Double End 30 Degrees Carbide Bright (Uncoated) Fractional Inch 0.0040 in 25/64 in more

Micro 100 Engraving Tool 1/2 L of Cut Carbide RNC-375-2

Engraving Tool Double End 90 Degrees Carbide Bright (Uncoated) Fractional Inch 0.0040 in 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad GEC-125-4-010X

Corner Radius End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.01 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-4-020

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 1/16 Carb 0.0050 rad GEC-062-4-005X

Corner Radius End Mill 1/16 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.005 in 3/16 in 1 1/2 in more

MICRO 100 VLM-500-5K Square End Mill 1-3/4 Cut Length nACRo

Square End Mill 1/2 in Milling Dia. Carbide nACRo Weldon Flat Length of Cut 1 3/4 in Overall Length 4 1/2 in Shank Dia. 1/2 in Features Dimension Type: Fractional Inch Milling Diameter: 1/2 End Mill Material: Carbide Number of Flutes: 5 Length of Cut:... more

Micro 100 Engraving Blank Carbide 1/4 RS-250-24

Engraving Blank Carbide Double End 1/4 in Bright (Uncoated) Fractional Inch 0.2500 more

Micro 100 Solid Router Bit 1/4 Spiral Downcut SFA-250-43

Solid Router Bit Primary Material Application Aluminum Spiral Upcut Fractional Inch 1/4 in Cutter Dia. more

Micro 100 Solid Router Bit 1/4 Spiral Downcut SFL-250-410

Solid Router Bit Primary Material Application Composite Spiral Downcut Fractional Inch 1/4 in Cutter Dia. more

Micro 100 Solid Router Bit 1/4 Diamond Cut RDD-70

Solid Router Bit Primary Material Application Composite Drill Point Fractional Inch 1/4 in Cutter Dia. more

Micro 100 Solid Router Bit 1/4 Diamond Cut RDB-70

Solid Router Bit Primary Material Application Composite Burr End Fractional Inch 1/4 in Cutter Dia. more

Micro 100 Solid Router Bit 1/4 Spiral Downcut SFP-250-46

Solid Router Bit Primary Material Application Composite Spiral Upcut Fractional Inch 1/4 in Cutter Dia. more

Micro 100 Solid Router Bit 1/4 Spiral Downcut SFA-250-46

Solid Router Bit Primary Material Application Aluminum Spiral Upcut Fractional Inch 1/4 in Cutter Dia. more

Micro 100 Solid Router Bit 1/4 Spiral Downcut SFA-250-410

Solid Router Bit Primary Material Application Aluminum Spiral Upcut Fractional Inch 1/4 in Cutter Dia. more

Micro 100 Solid Router Bit 1/4 Diamond Cut RDA-70

Solid Router Bit Primary Material Application Composite Plain End Fractional Inch 1/4 in Cutter Dia. more

Micro 100 Sq. End Mill Single End Carb 1/4 SEM-250-03X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/2 in Overall Length 2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 SEM-250-02

Square End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/2 in Overall Length 2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 SHR-250-4X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 GEM-250-4X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 GEM-250-3X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 EMS-250-4X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 SDH-250-03X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 GEM-250-3

Square End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 1/4 in more

Micro 100 Single-Point Tool Bit 1/4 Carbide BL-8

Single-Point Tool Bit BL Carbide Zinc Left Hand Shank Width 1/2 in more

Micro 100 Single-Point Tool Bit 1/4 Carbide RT-500

Single-Point Tool Bit RT Carbide Zinc Right Hand Shank Width 1/2 in more

Micro 100 Single-Point Tool Bit 1/4 Carbide CT-121

Single-Point Tool Bit CT Carbide Zinc Right Hand Shank Width 1/2 in more