See Matches In
Narrow Search Results
Price Range
Brand
Stores
| Best Seller  | Crown Alloy 3/32 x 36" HSS-10 BR.PKG. High Speed Tool Steel TIG 1 lb TUBE For use on high speed tool steels M-1 through M-44. Hot and cold trimming dies, blanking dies, piercing dies, shearing blades, cutting and shaving knives. Excellent for cladding high wear areas on tools and equipment and also for building composite... more | go to store |
 | Crown Alloy 3/32 x 36" HW-10 BR.PKG. Hot Work Tool Steel TIG 1 lb TUBE For use on hot working tool steels H-10 through H-12 and H-14 through H16. The Crown HW-10 is often used to weld on SAE 52100 steel. It works very well on hot or cold work trimmers, shears, blanking, and forming dies when spalling, cracking and... more | go to store |
| Best Seller  | Crown Alloy 3/32 x 36" 630/17-4PH BR.PKG. Stainless Steel TIG 1 lb TUBE ER 630 (17-4 PH) is used primarily in the aerospace and other high-technology industries. The nominal composition (wt.-%) of this classification is 16.4 Cr, 4.7 Ni, 3.6 Cu. The composition is designed primarily for welding ASTM A 564 Type 630 and some... more | go to store |
 | Crown Alloy 3/32 x 36" ROYAL 82-10 BR.PKG. Nickel-Chrome-Iron TIG 1 lb TUBE Royal 82-10 (TIG) and Royal 82-30 (MIG) are used for high heat and cryogenic (low temperature) applications. This alloy withstands thermal cycling even to sub-zero temperatures thus making it the perfect choice for flame hardening equipment, heat treat... more | go to store |
 | Crown Alloy 3/32 x 36" ER 309L BR.PKG. Stainless Steel TIG 1 lb TUBE Similar usage as the 309, however, the lower carbon content increases resistance to intergranular corrosion and helps to inhibit weld cracking. Tensile strength 87,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here... more | go to store |
 | Crown Alloy 3/32 x 36" NT-HW-10 BR.PKG. Tungsten Free Hot Work Tool Steel TIG 1 lb TUBE The Crown NT-HW-10 is designed to repair AISI H-13 hot work tool steel. For use on hot-work tools and dies that are subject to heat checking, especially when water-based coolants are used. Apply to die casting dies used in the aluminum, magnesium and... more | go to store |
 | Crown Alloy 3/32 CROWN 255 BR.PKG. Nickel ELECTRODE 1 lb TUBE Crown 255 is a machinable nickel-iron electrode for general repair on all cast iron and ductile iron. The Crown 255 is also used to weld clean steel to cast iron. Please Note: Welding fumes and gases can be hazardous to your health. Click here for the... more | go to store |
 | Crown Alloy 5/32 x 36" CROWN 8 - 10# Steel TIG 10 lb BOX Crown 8 (ER 80S-D2) is a premium low-alloy cut length TIG filler metal that contains ½ percent molybdenum (for increased strength) and high levels of manganese and silicon to provide good wetting and good rust and scale tolerance. The higher level of... more | go to store |
 | Crown Alloy 3/16 x 36" CROWN 2 - 10# Steel TIG 10 lb BOX This is a triple deoxidized mild steel wire, which will give quality welds on most grades of steel. Good for TIG pipe welding. Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both... more | go to store |
 | Crown Alloy 3/32 ROYAL 260 BR.PKG. Premium Medium Nickel ELECTRODE 1 lb TUBE Royal 260 is a superior machinable electrode for difficult welds on cast iron. Good for heavy sections of cast, meehanite and ductile iron. Also best to weld steel to cast iron. Please Note: Welding fumes and gases can be hazardous to your health.... more | go to store |
 | Crown Alloy 3/32 E 309L-16 BR.PKG. Stainless Steel ELECTRODE 1 lb TUBE Similar usage as the 309, however, the lower carbon content increases resistance to intergranular corrosion and helps to inhibit weld cracking. Tensile strength 87,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here... more | go to store |
 | Crown Alloy 3/32 E 330-16 BR.PKG. Stainless Steel ELECTRODE 1 lb TUBE Used to weld 330 wrought alloys and HT cast alloys. Excellent high temperature characteristics make it the first choice for work on heat treat and other type of furnaces. Tensile strength 86,000 PSI Please Note: Welding fumes and gases can be hazardous... more | go to store |
 | Crown Alloy 3/32 ROYAL 208 BR.PKG. High-Strength Low-Hydrogen ELECTRODE 1 lb TUBE Royal 208 is excellent for use on high strength low alloy steels. It is used where good ductility and high tensile strength are desirable. Royal 208 can be used as an excellent build up rod as a base for Royal 240 on hard-facing applications. Royal 208... more | go to store |
 | Crown Alloy 3/32 E 312-16 BR.PKG. Stainless Steel ELECTRODE 1 lb TUBE Used for welding cast alloys of similar composition. Best to use when chemistry of base metal is unknown. Tensile strength 115,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS... more | go to store |
 | Crown Alloy 3/32 ROYAL 182 BR.PKG. Iron-Nickel-Chrome ELECTRODE 1 lb TUBE Royal 182 is THE universal electrode for high heat and cryogenic (low temperature) applications. Royal 182 withstands thermal cycling even to sub-zero temperatures thus making it the perfect choice for flame hardening equipment, heat treat parts, and... more | go to store |
 | Crown Alloy 3/32 HW-20 BR.PKG. Hot Work Tool Steel ELECTRODE 1 lb TUBE For use on hot working tool steels H-10 through H-12 and H-14 through H16. The Crown HW-20 is often used to weld on SAE 52100 steel. It works very well on hot or cold work trimmers, shears, blanking, and forming dies when spalling, cracking and... more | go to store |
 | Crown Alloy 5/32 CROWN 295 BR.PKG. Nickel ELECTRODE 1 lb TUBE Crown 295 is best for welding thin sections of cast iron or for filling sand holes and foundry defects in cast iron. Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the... more | go to store |
 | Crown Alloy 3/32 CROWN 295 BR.PKG. Nickel ELECTRODE 1 lb TUBE Crown 295 is best for welding thin sections of cast iron or for filling sand holes and foundry defects in cast iron. Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the... more | go to store |
 | Crown Alloy 3/32 ROYAL 220-M BR.PKG. Super Alloy for ALL Steels ELECTRODE 1 lb TUBE Royal 220-M will produce the highest tensile and yield strength on over 50 different steels. These include dies, cast steels, tool steels, stainless steels, spring steels (including vanadium-moly spring steels), nickel clad steels, pressure vessels,... more | go to store |
 | Crown Alloy 3/32 ROYAL 220-M Super Alloy for ALL Steels ELECTRODE 5 lb BOX Royal 220-M will produce the highest tensile and yield strength on over 50 different steels. These include dies, cast steels, tool steels, stainless steels, spring steels (including vanadium-moly spring steels), nickel clad steels, pressure vessels,... more | go to store |
 | Crown Alloy 3/16 CROWN 295 BR.PKG. Nickel ELECTRODE 1 lb TUBE Crown 295 is best for welding thin sections of cast iron or for filling sand holes and foundry defects in cast iron. Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the... more | go to store |
 | Crown Alloy 3/16 CROWN 255 BR.PKG. Nickel ELECTRODE 1 lb TUBE Crown 255 is a machinable nickel-iron electrode for general repair on all cast iron and ductile iron. The Crown 255 is also used to weld clean steel to cast iron. Please Note: Welding fumes and gases can be hazardous to your health. Click here for the... more | go to store |
 | Crown Alloy 5/32 x 36" CROWN 8 BR.PKG. Steel TIG 1 lb TUBE Crown 8 (ER 80S-D2) is a premium low-alloy cut length TIG filler metal that contains ½ percent molybdenum (for increased strength) and high levels of manganese and silicon to provide good wetting and good rust and scale tolerance. The higher level of... more | go to store |
 | Crown Alloy 5/32 x 36" CROWN 125FC Bare Low-Fuming Bronze BRAZING 10 lb BOX Crown 125 and 125FC are brazing alloys used to fabricate or repair steels, cast iron, copper base alloys, galvanized and malleable irons, or any combination of these. Please Note: Welding fumes and gases can be hazardous to your health. Click here for... more | go to store |
 | Crown Alloy 5/32 x 36" CROWN 125 BR.PKG. Bare Low-Fuming Bronze BRAZING 1 lb TUBE Crown 125 and 125FC are brazing alloys used to fabricate or repair steels, cast iron, copper base alloys, galvanized and malleable irons, or any combination of these. Please Note: Welding fumes and gases can be hazardous to your health. Click here for... more | go to store |
 | Crown Alloy 5/32 x 36" CROWN 7 - 10# Steel TIG 10 lb BOX Crown 7 is a premium mild steel solid wire formulated to provide high quality welds on heavy duty, high speed, spray transfer applications as well as light duty, low speed, short-arc applications. Because of the higher levels of silicon and manganese... more | go to store |
 | Crown Alloy 5/32 x 36" CROWN 7 BR.PKG. Steel TIG 1 lb TUBE Crown 7 is a premium mild steel solid wire formulated to provide high quality welds on heavy duty, high speed, spray transfer applications as well as light duty, low speed, short-arc applications. Because of the higher levels of silicon and manganese... more | go to store |
 | Crown Alloy 5/32 x 36" CROWN 125FC BR.PKG. Bare Low-Fuming Bronze BRAZING 1 lb TUBE Crown 125 and 125FC are brazing alloys used to fabricate or repair steels, cast iron, copper base alloys, galvanized and malleable irons, or any combination of these. Please Note: Welding fumes and gases can be hazardous to your health. Click here for... more | go to store |
 | Crown Alloy 5/32 x 18" ROYAL KIRKROD BR.PK Zinc Alloy for Pot Metal or Aluminum SOLDER 1 lb TUBE Royal Kirkrod is the most widely used alloy for welding zinc-based metals, white metal and pot metal. These include carburetors, power mower housings, kirksite dies, power tools, trophies and ornaments, vacuum cleaners, antique car parts, models and... more | go to store |
 | Crown Alloy 5/32 x 36" ROYAL 220-T BR.PKG Super Alloy for All Steels TIG 1 lb TUBE Royal 220-TIG will produce the highest tensile and yield strength on over 50 different steels. These include dies, cast steels, tool steels, stainless steels, spring steels (including vanadium-moly spring steels), nickel clad steels, pressure vessels,... more | go to store |
 | Crown Alloy 3/32 ROYAL 300 Aluminum ELECTRODE 3 lb BOX Royal 300 is recommended for fabrication and repair of sheet, cast and wrought aluminum 1/8" and thicker. The extruded coating gives Royal 300 a quieter arc and less spatter than conventional aluminum electrodes. Royal 300 is an arc welding rod. (Can... more | go to store |
 | Crown Alloy 1/4 x 36" CROWN 125FC Bare Low-Fuming Bronze BRAZING 10 lb BOX Crown 125 and 125FC are brazing alloys used to fabricate or repair steels, cast iron, copper base alloys, galvanized and malleable irons, or any combination of these. Please Note: Welding fumes and gases can be hazardous to your health. Click here for... more | go to store |
 | Crown Alloy .035 x 36" CROWN 7 - 10# Steel TIG 10 lb BOX Crown 7 is a premium mild steel solid wire formulated to provide high quality welds on heavy duty, high speed, spray transfer applications as well as light duty, low speed, short-arc applications. Because of the higher levels of silicon and manganese... more | go to store |
 | Crown Alloy 1/8 x 36" CROWN 125FC BR.PKG. Bare Low-Fuming Bronze BRAZING 1 lb TUBE Crown 125 and 125FC are brazing alloys used to fabricate or repair steels, cast iron, copper base alloys, galvanized and malleable irons, or any combination of these. Please Note: Welding fumes and gases can be hazardous to your health. Click here for... more | go to store |
 | Crown Alloy 1/4 x 36" CROWN 125FC BR.PKG. Bare Low-Fuming Bronze BRAZING 1 lb TUBE Crown 125 and 125FC are brazing alloys used to fabricate or repair steels, cast iron, copper base alloys, galvanized and malleable irons, or any combination of these. Please Note: Welding fumes and gases can be hazardous to your health. Click here for... more | go to store |
 | Crown Alloy 1/16 x 36" CROWN 91 BR.PKG. Chrome-Moly TIG 1 lb TUBE Crown 91 is excellent for TIG welding 9% Chrome Moly modified steels with small additions of vanadium and niobium (columbium). This alloy is designed to provide high strength, toughness and is resistant to fatigue, corrosion and oxidation at elevated... more | go to store |
 | Crown Alloy 1/8 x 36" CROWN 91 BR.PKG. Chrome-Moly TIG 1 lb TUBE Crown 91 is excellent for TIG welding 9% Chrome Moly modified steels with small additions of vanadium and niobium (columbium). This alloy is designed to provide high strength, toughness and is resistant to fatigue, corrosion and oxidation at elevated... more | go to store |
 | Crown Alloy .045 x 36" CROWN 7 - 10# Steel TIG 10 lb BOX Crown 7 is a premium mild steel solid wire formulated to provide high quality welds on heavy duty, high speed, spray transfer applications as well as light duty, low speed, short-arc applications. Because of the higher levels of silicon and manganese... more | go to store |
 | Crown Alloy .045 x 8" ROYAL 220-MIG Super Alloy for All Steels MIG 13 lb SPOOL Royal 220-MIG will produce the highest tensile and yield strength on over 50 different kinds of steels. These include Tool Steels, Dies, Springs, Stainless Steel, Carbon Steels, Nickel Clad Steels, Pressure Vessels, Vanadium-Moly Spring Steels and... more | go to store |
 | Crown Alloy .035 x 2# ROYAL 220-MIG Super Alloy for All Steels MIG 2 lb SPOOL Royal 220-MIG will produce the highest tensile and yield strength on over 50 different kinds of steels. These include Tool Steels, Dies, Springs, Stainless Steel, Carbon Steels, Nickel Clad Steels, Pressure Vessels, Vanadium-Moly Spring Steels and... more | go to store |
Ads related to crown alloy 3 32 x
