Micro 100 › clayton 8 1 2 high

Micro 100 Cor Rad End Mill 1/2 Carb 1/8 rad VHS-500-5-030K

Corner Radius End Mill 1/2 in Milling Dia. Carbide nACRo Weldon Flat Fractional Inch 0.03 in 5/8 in 3 in more

Micro 100 Cor Rad End Mill 1/2 Carb 1/8 rad VHSM-060-5K

Corner Radius End Mill 6.00 mm Milling Dia. Carbide nACRo Weldon Flat Metric 0.50mm 10.00 mm 57.00 mm more

Micro 100 Sq. End Mill Single End Carb 1/8 EMS-125-2

Square End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/2 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-2-020X

Corner Radius End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Engraving Blank Carbide 1/8 RS-125-2

Engraving Blank Carbide Double End 1/8 in Bright (Uncoated) Fractional Inch 0.1250 more

Micro 100 Single-Point Tool Bit 1/2 Carbide FRT-8

Single-Point Tool Bit FRT Carbide Zinc Shank Width 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1/8 GEM-125-2

Square End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/2 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Single-Point Tool Bit 1/2 Carbide C-8

Single-Point Tool Bit C Carbide Zinc Neutral Shank Width 1/2 in more

Micro 100 Single-Point Tool Bit 1/2 Carbide E-8

Single-Point Tool Bit E Carbide Zinc Shank Width 1/2 in more

Micro 100 Micro Drill 1/8 Carbide DR-125-2

Micro Drill Bit Drill Bit Size 1/8 in Drill Bit Point Angle 118 Degrees Conventional Point Carbide Bright (Uncoated) +0.0000 in /-0.0005 in Spiral C2 more

Micro 100 CR End Mill 0.090 CR 5/8 Dia 1-1/4 Cut ARC-625-3-090

Corner Radius End Mill 5/8 in Milling Dia. Bright (Uncoated) Fractional Inch 0.090 in 1 1/4 in 3 1/2 in more

Micro 100 CRE-125-031 Corner Rounding End Mill: 1/32 Radius 1/8 Diam 3 Flute

Micro 100 CRE-125-031 Corner Rounding End Mill: 1/32 Radius 1/8 Diam 3 Flutes Solid Carbide 2 OAL 1/8 Shank Dia Bright/Uncoated Double End Priced and sold as each (1). more

Micro 100 Engraving Tool 5/8 L of Cut Carbide RTC-500-2

Engraving Tool Double End 30 Degrees Carbide Bright (Uncoated) Fractional Inch .004 in 1/2 in more

Micro 100 Sq. End Mill Single End Carb 3/8 GEM-375-2

Square End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad VHM-125-4X

Corner Radius End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.01 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-3-020X

Corner Radius End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-4-020

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-3-020

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad GEC-125-4-010

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad GEC-125-4-010X

Corner Radius End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.01 in 1/2 in 1 1/2 in more

Micro 100 Single-Point Tool Bit 1/4 Carbide BL-8

Single-Point Tool Bit BL Carbide Zinc Left Hand Shank Width 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1/8 GEM-125-3

Square End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/2 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Single-Point Tool Bit 1/4 Carbide BR-8

Single-Point Tool Bit BR Carbide Zinc Right Hand Shank Width 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1/8 EMS-125-3X

Square End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/2 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Cut Off Blade 1/8 Carbide Tip T-108

Cut Off Blade High Speed Steel Cutter Material Carbide Tipped Overall Length 5 in Zinc Parallel more

Micro 100 Cut Off Blade 1/8 Carbide Tip T-108-V

Cut Off Blade High Speed Steel Cutter Material Carbide Tipped Overall Length 5 in Zinc Parallel more

Micro 100 Sq. End Mill Single End Carb 1/8 GEM-125-4X

Square End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/2 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Cut Off Blade 1/8 Carbide Tip T-105

Cut Off Blade High Speed Steel Cutter Material Carbide Tipped Overall Length 5 in Zinc Parallel more

Micro 100 Cut Off Blade 1/8 Carbide Tip T-111

Cut Off Blade High Speed Steel Cutter Material Carbide Tipped Overall Length 6 in Zinc Parallel more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0150 rad MEF-125-750-015

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 1/64 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0050 rad MEF-125-750-005

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.005 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad MEF-125-750-010

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0050 rad MEF-125-375-005

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.005 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0150 rad MEF-125-750-015K

Corner Radius End Mill 1/8 in Milling Dia. Carbide nACRo Straight Fractional Inch 1/64 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0150 rad MEF-125-1000-015K

Corner Radius End Mill 1/8 in Milling Dia. Carbide nACRo Straight Fractional Inch 1/64 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0050 rad MEF-125-1000-005K

Corner Radius End Mill 1/8 in Milling Dia. Carbide nACRo Straight Fractional Inch 0.005 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0150 rad MEF-125-1000-015

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 1/64 in 1/8 in 2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad MEF-125-375-010

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 1/8 in 2 in more