Audio / Video Cables & Adapters › IEC › wall plate

IEC RM35-BK 3.5 mm Stereo Phone Female to Female Flush Mount Keystone Connector Plate Insert Black

Keystone connectors made to snap into Keystone wall plates Keystone inserts can also be snapped into a panel with a cutout of the following dimensions. The panel s thickness should not exceed .065 (1.7mm) more

IEC RM35-YE 3.5 mm Stereo Phone Female to Female Flush Mount Keystone Connector Plate Insert Yellow

Keystone connectors made to snap into Keystone wall plates Keystone inserts can also be snapped into a panel with a cutout of the following dimensions. The panel s thickness should not exceed .065 (1.7mm) more

IEC RMBNC-YE BNC 75 Ohm Female to Female Flush Mount Keystone Connector Plate Insert Yellow

Keystone connectors made to snap into Keystone wall plates Keystone inserts can also be snapped into a panel with a cutout of the following dimensions. The panel s thickness should not exceed .065 (1.7mm) more

IEC RM35-RD 3.5 mm Stereo Phone Female to Female Flush Mount Keystone Connector Plate Insert Red

Keystone connectors made to snap into Keystone wall plates Keystone inserts can also be snapped into a panel with a cutout of the following dimensions. The panel s thickness should not exceed .065 (1.7mm) more

IEC RM35-GN 3.5 mm Stereo Phone Female to Female Flush Mount Keystone Connector Plate Insert Green

Keystone connectors made to snap into Keystone wall plates Keystone inserts can also be snapped into a panel with a cutout of the following dimensions. The panel s thickness should not exceed .065 (1.7mm) more

IEC RM35-IV 3.5 mm Stereo Phone Female to Female Flush Mount Keystone Connector Plate Insert Ivory

Manufacturer part number: RM35-IV Keystone connectors made to snap into Keystone wall plates for a list of our Keystone plates. Keystone inserts can also be snapped into a panel with a cutout of the following dimensions. The panel s thickness should... more

IEC BNCF-F-MT BNC Female to Female Bulkhead Coax Connector

Manufacturer part number: BNCF-F-MT Use to join a coax cable inside a wall to a coax patch cable outside the wall. Mounts to a wallplate with a BNC cutout. The and are just two of the many wall plates this can be used on just look for the 01 as the... more

IEC PH35F-ST-MT Phone Jack 3.5mm Stereo Chassis Mount

Manufacturer part number: PH35F-ST-MT This jack is designed to fit into a .25 (1/4 inch) diameter hole. The multimedia wall plate has a .375 (3/8 inch) hole this won t work for multimedia wall plates. See our or for wall plate fitting connectors. Full... more

IEC BNCF-RG62-PL-MT BNC Female Bulkhead Coax Connector for RG59 and RG62 Plenum

Requires the IDL30-591 crimp tool or the IDL30-591 die that fits into the IDL30-506 crimp tool handle. Mounts to a wallplate with a BNC cutout. The WZ10102 and WZ10104 are just two of the many wall plates this can be used on just look for the 01 as the... more

IEC BNCF-RG58-PL-MT BNC Female Bulkhead Coax Connector for RG58 Plenum

Requires the IDL30-591 crimp tool or the IDL30-591 die that fits into the IDL30-506 crimp tool handle. Mounts to a wallplate with a BNC cutout. The WZ10102 and WZ10104 are just two of the many wall plates this can be used on just look for the 01 as the... more

IEC BNCF-RG62-MT BNC Female Coax Connector Bulkhead for RG59 and RG62

Requires the IDL30-502 crimp tool or the IDL30-581 die that fits into the IDL30-506 crimp tool handle. Mounts to a wallplate with a BNC cutout. The WZ10102 and WZ10104 are just two of the many wall plates this can be used on just look for the 01 as the... more

IEC RMRCA-OR RCA Female to Female Connector on Orange Flush Mount Keystone

Manufacturer part number: RMRCA-OR Keystone connectors made to snap into Keystone wall plates for a list of our Keystone plates. Keystone inserts can also be snapped into a panel with a cutout of the following dimensions. The panel s thickness should... more

IEC RMTOS-WH Toslink Female to Female Connector on White Flush Mount Keystone White

Manufacturer part number: RMTOS-WH These are designed for the Toslink connector shown to the right Keystone connectors made to snap into Keystone wall plates for a list of our Keystone plates. Keystone inserts can also be snapped into a panel with a... more

IEC RMFW6 Firewire 6 Pin Female to Female Connector on Ivory Flush Mount Keystone

Manufacturer part number: RMFW6 Keystone connectors made to snap into Keystone wall plates for a list of our Keystone plates. Keystone inserts can also be snapped into a panel with a cutout of the following dimensions. The panel s thickness should not... more

IEC RMRCA-BK RCA Female to Female Connector on Black Flush Mount Keystone

Manufacturer part number: RMRCA-BK Keystone connectors made to snap into Keystone wall plates for a list of our Keystone plates. Keystone inserts can also be snapped into a panel with a cutout of the following dimensions. The panel s thickness should... more

IEC RJMD04F-F-WH S Video ( SVHS ) Mini Din 4 Female to Female Keystone Connector White

Manufacturer part number: RJMD04F-F-WH Keystone connectors made to snap into Keystone wall plates for a list of our Keystone plates. Keystone inserts can also be snapped into a panel with a cutout of the following dimensions. The panel s thickness... more

IEC PHONOF-F-MMT-OR RCA Type Phono Female to Female Chassis Mount (1/2 mount) Orange

Manufacturer part number: PHONOF-F-MMT-OR The mounting hardware allows this connector to be mounted on a panel with a 1/2 hole cutout exact dimensions are as follows; to see our selection of Coax wall plates this connector will fit in the plates made... more

IEC M9257 DB25 Male to Male Thin Gender Changer

Manufacturer part number: M9257 The hardware that comes with this connector assembly is too short for mounting to a panel or plastic wall plate. In order to mount this assembly a pair of s would be needed. Extra posts would not be needed for metal wall... more

IEC M9096 DB9 Female to Female Thin Gender Changer

Manufacturer part number: M9096 The hardware that comes with this connector assembly is too short for mounting to a panel or plastic wall plate. In order to mount this assembly a pair of s would be needed. Extra posts would not be needed for metal wall... more

IEC M9097 DB9 Male to Male Thin Gender Changer

Manufacturer part number: M9097 The hardware that comes with this connector assembly is too short for mounting to a panel or plastic wall plate. In order to mount this assembly a pair of s would be needed. Extra posts would not be needed for metal wall... more

IEC M9376 DB37 Female to Female Thin Gender Changer

Manufacturer part number: M9376 The hardware that comes with this connector assembly is too short for mounting to a panel or plastic wall plate. In order to mount this assembly a pair of s would be needed. Extra posts would not be needed for metal wall... more

IEC M9377 DB37 Male to Male Thin Gender Changer

Manufacturer part number: M9377 The hardware that comes with this connector assembly is too short for mounting to a panel or plastic wall plate. In order to mount this assembly a pair of s would be needed. Extra posts would not be needed for metal wall... more

IEC M9157 DB15 Male to Male Thin Gender Changer

Manufacturer part number: M9157 The hardware that comes with this connector assembly is too short for mounting to a panel or plastic wall plate. In order to mount this assembly a pair of s would be needed. Extra posts would not be needed for metal wall... more

IEC M9007 DH15 Male to Female Thin Port Saver

Manufacturer part number: M9007 The hardware that comes with this connector assembly is too short for mounting to a panel or plastic wall plate. In order to mount this assembly a pair of s would be needed. Extra posts would not be needed for metal wall... more

IEC M9159 DH15 Male to Male Thin Gender Changer

Manufacturer part number: M9159 The hardware that comes with this connector assembly is too short for mounting to a panel or plastic wall plate. In order to mount this assembly a pair of s would be needed. Extra posts would not be needed for metal wall... more

IEC M9001 DB9 Male to Female Thin Port Saver

Manufacturer part number: M9001 The hardware that comes with this connector assembly is too short for mounting to a panel or plastic wall plate. In order to mount this assembly a pair of s would be needed. Extra posts would not be needed for metal wall... more

IEC M9156 DB15 Female to Female Thin Gender Changer

Manufacturer part number: M9156 The hardware that comes with this connector assembly is too short for mounting to a panel or plastic wall plate. In order to mount this assembly a pair of s would be needed. Extra posts would not be needed for metal wall... more

IEC PHONOF-F-MMT-BK RCA Type Phono Female to Female Chassis Mount (1/2 mount) Black

Manufacturer part number: PHONOF-F-MMT-BK The mounting hardware allows this connector to be mounted on a panel with a 1/2 hole cutout exact dimensions are as follows; to see our selection of Coax wall plates this connector will fit in the plates made... more

IEC PHONOF-F-MMT-RD RCA Type Phono Female to Female Chassis Mount (1/2 mount) Red

Manufacturer part number: PHONOF-F-MMT-RD The mounting hardware allows this connector to be mounted on a panel with a 1/2 hole cutout exact dimensions are as follows; to see our selection of Coax wall plates this connector will fit in the plates made... more

IEC PHONOF-F-MMT-YE RCA Type Phono Female to Female Chassis Mount (1/2 mount) Yellow

Manufacturer part number: PHONOF-F-MMT-YE The mounting hardware allows this connector to be mounted on a panel with a 1/2 hole cutout exact dimensions are as follows; to see our selection of Coax wall plates this connector will fit in the plates made... more

IEC PHONOF-F-MMT-GN RCA Type Phono Female to Female Chassis Mount (1/2 mount) Green

Manufacturer part number: PHONOF-F-MMT-GN The mounting hardware allows this connector to be mounted on a panel with a 1/2 hole cutout exact dimensions are as follows; to see our selection of Coax wall plates this connector will fit in the plates made... more

IEC PHONOF-F-MMT-BU RCA Type Phono Female to Female Chassis Mount (1/2 mount) Blue

Manufacturer part number: PHONOF-F-MMT-BU The mounting hardware allows this connector to be mounted on a panel with a 1/2 hole cutout exact dimensions are as follows; to see our selection of Coax wall plates this connector will fit in the plates made... more

IEC PHONOF-F-MMT-WH RCA Type Phono Female to Female Chassis Mount (1/2 mount) White

Manufacturer part number: PHONOF-F-MMT-WH The mounting hardware allows this connector to be mounted on a panel with a 1/2 hole cutout exact dimensions are as follows; to see our selection of Coax wall plates this connector will fit in the plates made... more

IEC RJ4508F-MT-PIL6 RJ4508F Keystone Connector Category 6 Pink

We recommend the 568B color coding for wiring however 568A also works provided the same color code is used at both ends of the wire. Keystone connectors made to snap into Keystone wall plates for a list of our Keystone plates. Keystone inserts can also... more

IEC RJ1106F-F-MT-BK RJ11 6 Position Keystone Connector Female to Female Black

Manufacturer part number: RJ1106F-F-MT-BK This keystone is wired straight through as follows; 1---12---23---34---45---56---6 Keystone connectors made to snap into Keystone wall plates for a list of our Keystone plates. Keystone inserts can also be... more

IEC RJ1106F-F-MT-WH RJ11 6 Position Keystone Connector Female to Female White

Manufacturer part number: RJ1106F-F-MT-WH This keystone is wired straight through as follows; 1---12---23---34---45---56---6 Keystone connectors made to snap into Keystone wall plates for a list of our Keystone plates. Keystone inserts can also be... more

IEC RJ1106F-F-MT RJ11 6 Position Keystone Connector Female to Female Ivory

Manufacturer part number: RJ1106F-F-MT This keystone is wired straight through as follows; 1---12---23---34---45---56---6 Keystone connectors made to snap into Keystone wall plates for a list of our Keystone plates. Keystone inserts can also be snapped... more

IEC RMD04-WH S Video ( SVHS ) Mini Din 4 Female to Female Flush Mount Keystone Connector White

Keystone connectors made to snap into Keystone wall plates Keystone inserts can also be snapped into a panel with a cutout of the following dimensions. The panel s thickness should not exceed .065 (1.7mm) more