Hillman › 7 32 x 3 3

Hillman 880290 #8-32 x 3/4 in. Socket-Head Cap Screw 2-Pack

FEATURES: The Hillman Socket-head Cap Screw carries a recessed internal socket drive to add strength. This socket head cap screw is commonly used on machine parts manufacturing equipment and other mechanical applications. A socket head screw is also... more

The Hillman Group 101036 6-32-Inch x 3/4-Inch Flat Head Phillips Machine Screw 100-Pack

Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together. Measured from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed use with nuts of the same... more

Hillman 881097 Hitch Pin Clips 3/32 Inch Loop Diameter x 2-5/16 Inch Length

Dimensions of hitch pin clips: 3/32 in. in loop diameter and 2-5/16 in. L Commonly used to secure the ends of round shafts on heavy equipment Hitch pin clips are great for agricultural or industrial applications High-strength steel construction of the... more

Hillman No. 6-32 X 3/4 in. L Slotted Flat Head Zinc-Plated Steel Machine Screws 10 pk

Product Details Stove bolts are used to fasten metal parts together that are going into a tapped hole and being held together by a nut. To obtain the fastener length measure from the underside of the head to the tip of the screw. Stove bolts are nearly... more

The Hillman Group 90120 6-32-Inch x 3/8-Inch Round Head Combo Machine Screw 100-Pack

Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together. Measured from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed use with nuts of the same... more

Hillman No. 6-32 X 3 in. L Combination Round Head Zinc-Plated Steel Machine Screws 100 pk

Zinc round-head combo-drive machine screws have a machine-cut thread throughout the length of their shank. Fasten with either a Phillips or slot screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are... more

Hillman Machine Screws No. 10 - 32 X 3/4 Zinc Combination/Phillips/Slotted Round Head Box 100

Phillips/Slotted combination. Round head. Box/100. No.10-32 x 3/4 . Manufacturer number: 90299. SKU #: 56313. Distributed by Hillman Group Rsc. more

Hillman 90185 Machine Screws Combination Zinc Plated 8-32 x 3/4 Box

Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together. Measured from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed use with nuts of the same... more

Hillman 881992 Oval-head Phillips Machine Screw #8-32 x 3/4 in. 2-Pack

Product Details These oval head stainless steel screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life make sure to use the Hillman Stainless Steel Oval-head... more

Hillman Machine Screws No. 6 - 32 X 3/8 Zinc Combination/Phillips/Slotted Round Head Box 100

Hillman No. 6-32 in. x 3/8 in. L Combination Round Head Zinc-Plated Steel Machine Screws 100 pk more

Hillman Fasteners 90212 8-32 x 3 in. Zinc Plated Machine Screw 100 Pack

Features Combo round head 100 pack Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material If nuts are needed use with nuts of the same finish and threading for proper fit Dimension - 3.5 x 3.5 x 1.5... more

Hillman 883018 Pan-head Phillips Machine Screw #8-32 x 3/8 in. 2-Pack

Product Details The Hillman Phillips Pan-Head Phillips Machine Screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life make sure to use these machine screws... more

Hillman 90212 Round Head Machine Screw 8-32 x 3 100 Pack Each

100 pack combo round head Zinc Plated Machine Screw. 100 pack 8-32 x 3 Zinc plated Combo round head Machine screw. more

Hillman 0828536 Stainless Steel Machine Screws 10-32 x 3/4

18-8 stainless steel flat-head Phillips-drive machine screws have a machine-cut thread throughout the length of their shank. Fasten with a Phillips screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are... more

Hillman No. 6-32 X 3/4 in. L Phillips Oval Head Stainless Steel Machine Screws 100 pk

18-8 stainless steel oval-head Phillips-drive machine screws have a machine-cut thread throughout the length of their shank. Fasten with a Phillips screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are... more

Hillman 90185 Slotted Round Head Machine Screw 8-32 x 3/4 Each

Zinc plated slotted round head. Machine screw. 8-32 x 3/4 Zinc plated Slotted round head Machine screw 100 Pack. more

Hillman No. 6-32 X 3/8 in. L Phillips Oval Head Stainless Steel Machine Screws 100 pk

18-8 stainless steel oval-head Phillips-drive machine screws have a machine-cut thread throughout the length of their shank. Protect the screw and fastened material. If nuts are needed use with nuts of the same finish and threading for proper fit. Use... more

The Hillman Group 90185 8-32-Inch x 3/4-Inch Round Head Combo Machine Screw 100-Pack

Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together. Measured from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed use with nuts of the same... more

Hillman 90129 Machine Screw 6-32 x 3/4 100 Pack Each

100 pack. Size: 6-32 x 3/4 . Zinc plated. Combination phillips/slotted. Slotted round head. more

Hillman 883020 Pan-head Phillips Machine Screw #8-32 x 3/4 in. 2-Pack

Product Details The Hillman Phillips Pan-Head Machine Screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life make sure to use these machine screws with nuts of... more

Hillman 881972 Flat-head Phillips Machine Screw #8-32 x 3/4 inch 2-Pack

Features: Stainless steel flat-head Phillips-drive screw features #8-32 USS coarse thread; measure 3/4 in. L Part of the Hillman Deep Drawer program Use flat head machine screws for any indoor or outdoor projects Use flat head screw to fasten metal... more

Hillman No. 8-32 in. x 3/4 in. L Phillips Flat Head Zinc-Plated Steel Machine Screws 100 pk

Machine screws are used with nuts or screwed directly into a threaded socket to hold metal parts together. Measure from the bottom of the head to the tip of the screw to get Fastener Length. If nuts are needed use nuts with the same finish and tap for... more

Hillman Carriage Bolts 3/8 X 7 Hot Dip Galvanized

The Hillman Group 812594 Galvanized Carriage Bolt 3/8 x 7 50 more

Hillman 881260 7/16 in. ID x 3/4 in. OD Rubber Grommets 2-Pack

Product Details The Hillman Rubber Grommets fit over a cut or punched hole to protect wires and cables from the wear and tear associated with rubbing/scratching against edges of the cut hole. Once inserted into the hole the grommet is held in place by... more

Hillman 45363 #7 x 3/4-Inch Flat Phillips Wood Screw Antique Bronze (Pack of 40)

Hillman 45363 #7 x 3/4-Inch Flat Phillips Wood Screw Antique Bronze (Pack of 40) - Wood screws are to be used when joining two pieces of wood - Pre-drilling is recommended - Wood screws also taper along the threaded portion optimizing the screws... more

Hillman 884792 Hex Flange Bolt 7/16 in. -14 Coarse Thread x 3 in. Grade 8

The Hillman Grade 8 Hex Flange Bolt has acircular flange under the head that acts like a washer to distribute the load. Hillman Flange Bolts are ideal for use in any application where high-strength fasteners with a protective flange are desired. Grade... more

Hillman 3/8 in.-16 x 7/16 in. Brad-Hole Tee Nut 880541

FEATURES: The Hillman Brad-Hole Tee Nut puts steel threads into wood without the need for counter boring. Hillman Brad-hole Tee Nuts contain brad holes and must be attached using small brad nails. Brad-hole tee nut features 3/8 in.-16 USS coarse... more

Hillman 884788 Hex Flange Bolt 7/16 in. -14 Coarse Thread x 1-3/4 in. Grade 8

The Hillman Grade 8 Hex Flange Bolt has acircular flange under the head that acts like a washer to distribute the load. Hillman Flange Bolts are ideal for use in any application where high-strength fasteners with a protective flange are desired. Grade... more

Hillman Wedge Anchor 3/4 X 7 Zinc Plated Steel

ANCHR WEDGE 3/4X7 BX10 The Power-Stud+ SD1 is a fully threaded torque controlled wedge expansion anchor that is designed for concrete applications. Suitable base materials are normal-weight and sand-lightweight concrete concrete over steel deck and... more

Hillman Lok/Bolt Sleeve Anchor 3/8 X 1-7/8 Hex Head 1-1/2 Zinc Plated Steel

Hillman Lok/Bolt Sleeve Anchor a robust and versatile fastening solution meticulously engineered to securely anchor objects to concrete brick or block surfaces. Crafted with precision and durability by Hillman a trusted leader in hardware solutions... more

Hillman 881079 7/16 in. x 2-1/2 in. Universal Clevis Pin 3-Pack

Product Details Universal Clevis Pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis. Universal clevis pins also known as adjustable clevis pins feature holes down the side of the pin to accommodate... more

Hillman Hardware Essentials 321882 Hook and Eye Turnbuckle Zinc 1/4 -20 x 7-3/8

FEATURES: Hillman Hardware Essentials Hook and Eye Turnbuckles Zinc (1/4 -20 x 7-3/8 ) are great for adjusting tensions between rope or cables. One hook is located at each end of the turn buckle. Slowly turn either to adjust tension. Each Turnbuckles... more

Hillman 884771 Carriage Bolt 7/16 in. Dia. x 3-1/2 in. L Grade 5 Zinc Plated

This Hillman Grade 5 Carriage Bolt is designed to fasten a wooden face to either a wood or metal frame. Its flat head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is... more

Hillman Lag Screw 3/8 X 7 Grade 2 Hex Head

Hex Lag Screws are used for fastening directly into wood surfaces. They are used with a shield lag lag screws and can be used in masonry applications. The flat-sided hex head is ideal for quick and easy-to-drive installation. The threads on Lag Screws... more

The Hillman Group 44936 1/4-20 x 3/4-Inch Stainless Steel Thumb Screw 7-Pack

Product DescriptionThese thumb screws are machine screw thread fasteners with a large winged head allowing for manual hand-tightened installation Fully adjustable and removable they offer a large variety of household and equipment applications Fully... more

The Hillman Group 370827 Hex Head Sleeve Anchor 3/8 X 7/8-Inch 25-Pack

Concrete Sleeve Anchors design allows them to anchor into concrete brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve expanding and anchoring itself securely in the concrete brick or block. Concrete Sleeve... more

Hillman 881080 7/16 in. x 3 in. Universal Clevis Pin 1-Pack

Product Details Universal Clevis Pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis. Universal clevis pins also known as adjustable clevis pins feature holes down the side of the pin to accommodate... more

Hillman 240198 Carriage Bolt 3/8-16 x 7 50 Pack Each

Carriage bolts are commonly used in wood connections. The square neck under the round head will seat into the hole in the wood to prevent the head from turning. 50 Pack 3/8-16 x 7 Carriage bolt Steel round head Square neck Carriage bolts have a large... more