Irwin › 5 pcs 70mm dia round

Irwin Marples 1 in. Dia. x 6 in. L Carbon Steel Forstner Drill Bit 3/8 in. Round Shank 1 pc.

Bores perfectly smooth flat bottomed holes. More accurate holes at any angle. Use for boring overlapping holes or pocket holes. Reduced shank fits 3/8 inch and larger drills and drill presses. more

IRWIN 15230ZR 7-1/4",40-Teeth Saw Blade,Steel

Circular Saw Blade, Series Classic, Blade Dia. 7 1/4 in, Max. Blade Speed 8,300 RPM, Arbor Size 5/8 in, Arbor Shape Round, Diamond Knockout Yes, Number of Teeth 40, Max. Cutting Depth 2 3/8 in, Primary Material Application Wood, Materials Cut Wood,... more

Irwin Marples 1-7/8 in. Dia. x 6 in. L Carbon Steel Forstner Drill Bit 3/8 in. Round Shank 1 pc.

Bores perfectly smooth flat bottomed holes. More accurate holes at any angle. Use for boring overlapping holes or pocket holes. Reduced shank fits 3/8 inch and larger drills and drill presses. more

Irwin Marples 1-1/2 in. Dia. x 6 in. L Carbon Steel Forstner Drill Bit 3/8 in. Round Shank 1 pc.

Bores perfectly smooth flat bottomed holes. More accurate holes at any angle. Use for boring overlapping holes or pocket holes. Reduced shank fits 3/8 inch and larger drills and drill presses. more

Irwin Marples 1 1/4 in. Dia. x 6 in. L Carbon Steel Forstner Drill Bit 3/8 in. Round Shank 1 pc.

Bores perfectly smooth flat bottomed holes. More accurate holes at any angle. Use for boring overlapping holes or pocket holes. Reduced shank fits 3/8 inch and larger drills and drill presses. more

Irwin 1/4 in. Dia. High Speed Steel Wood Countersink 1/4 in. Round Shank 1 pc.

IRWIN Wood Countersinks feature a tapered drill and wide flutes that drill fast clean pilot holes and ensure a tight fit for screws. They have an adjustable four cutter counter bore attachment that cuts fast and clears chips quickly for fast smooth... more

Irwin 1/2 in. Dia. x 6 in. L High Speed Steel Drill Bit 3/8 in. Round Shank 1 pc.

Titanium Nitride coating resists heat and friction extending the cutting edge life up to 6 times that of other high-speed step drill bits. Made from premium high-speed steel for increased durability. 135-degree split-point tip starts drilling... more

Irwin Marples 2 in. Dia. x 6 in. L Carbon Steel Forstner Drill Bit 3/8 in. Round Shank 1 pc.

IRWIN marples wood drilling Forstner bits are constructed of tough carbon steel to stay sharp and produce precise pocket holes and flat-bottomed (Blind) holes. The ultra-sharp cutting teeth feature optimized angles to cut through hard and soft woods in... more

Irwin Multi Size Dia. Steel Wood Countersink 1/4 in. Round Shank 8 pc.

IRWIN Wood Countersinks feature a tapered drill and wide flutes that drill fast clean pilot holes and ensure a tight fit for screws. They have an adjustable four cutter counter bore attachment that cuts fast and clears chips quickly for fast smooth... more

Irwin 3/8 in. Dia. High Speed Steel Countersink 1/4 in. Round Shank 1 pc.

* * IRWIN High Speed Steel Countersinks feature a precision-ground 82-degree tip that makes them ideal for countersinking into most machinable metals. They re made from industrial grade high speed steel for increased durability and they include a black... more

Irwin 3/8 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 5/16 in. Hex Shank 1 pc.

Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter producing a... more

Irwin 5/8 - 1-3/4 in. Dia. x 5-1/2 in. L High Speed Steel Wood Boring Bit 7/16 in. 6-Flat Shank 1 pc.

Lockhead Drill Press Adjustable Wood Bit 2 Cutters: 5/8 -1 and 1 -1-3/4 9/32 Shank Size 5-1/2 Overall Length Wedge Type Blade Lock and Slow Feed SScrew Point Special Precision Ground Shank Has 3 Equally Spaced Flats For Use In Drill Presses Having 3... more

Lenox Speed Slot 1-5/8 in. Dia. x 1.5 in. L Bi-Metal Hole Saw 1 pc.

1-5/8 inch Cutting Depth electron Beam Welded M-2 High Speed Steel spring Steel Back Positive Rake Tooth cutting Edge Rc 63-65 Vari-Tooth Design suggested Rpm 230 For Mild Steel 115 For Tool And Stainless Steel 150 For Cast Iron 300 For Brass And 345... more

Irwin 15/16 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 5/16 in. Hex Shank 1 pc.

Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter producing a... more

Irwin 29/64 in. Dia. x 5-5/8 in. L High Speed Steel Drill Bit 3/8 in. Straight Shank 1 pc.

Black Oxide HSS Fractional straight shank jobber length drill bits with 135 split point tip starts drilling immediately and eliminates walking. more

Irwin Speedbor 2-1/8 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Marples 10 Dia. x 5/8 in. Carbide Woodworking Circular Saw Blade 40 teeth 1 pc.

The Irwin Tools 1807367 Marples Laser Cut 10 inch 40 Teeth Alternate Tooth Bevel Circular Saw Blade is part of a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking... more

Irwin Marathon 5-3/8 in. Dia. x 10 mm Carbide Circular Saw Blade 18 teeth 1 pc.

The Irwin Tools Marathon 14015 5-3/8 inch x 18 tooth Framing/Ripping Cordless Circular Saw Blade has a 10 mm Arbor and fits most 5-3/8 inch Cordless Circular Saws. The Ultra Thin Kerf provides more cuts per charge and extends the life of the battery.... more

Irwin 10 Dia. x 5/8 in. Carbide Classic Circular Saw Blade 40 teeth 1 pc.

Irwin Tools Classic Series Carbide Table / Miter Circular Saw Blades 10 inch 40 Teeth Precision-ground teeth allow for smooth accurate cuts. Fully hardened plate runs truer longer. Heavy-gauge high-carbon steel for extended life. Features a 5/8 inch... more

Irwin Speedhammer Plus 5/16 in. Dia. x 6 in. L Steel Drill Bit 1 pc. - Case Of: 1; Each Pack Qty: 1

SDS-plus Standard Tips 9 1/2 in 5/16 in Dia. Irwin SDS-plus Standard Tips WARNING: Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth... more

Irwin 5/8 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53 HRC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

Irwin 7/8 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 1 pc.

IRWIN Auger Bit is for fast rough or clean and exact holes. Irwin s extensive line of woodboring drill bits provide the user with the best available tools for each application in achieving their drilling needs. more

Irwin 5/16 in. Dia. x 18 in. L Steel Bell Hanger Bit Straight Shank 1 pc.

Irwin Straight Shank Wood Installer Bits feature an 82 degree point for fast smooth drilling in wood. These bits are made with a hole in the flute for easy wire pulling through walls ceilings and floors. They have a 3 flatted shank to prevent slipping... more

Lenox Speed Slot 3-1/2 in. Dia. x 1.5 in. L Bi-Metal Hole Saw 1 pc.

Lenox Industries Tuff Tooth bi-metal hole saw. Patented design resists tooth strippage High speed steel teeth resist breaking and offer extended life Tuff Tooth design is reinforced to cut stronger and last longer Thick backing plate with holes for... more

Irwin Marples 10 Dia. x 5/8 in. Carbide Woodworking Circular Saw Blade 60 teeth 1 pc.

The Irwin Tools 1807369 Marples Laser Cut 10 inch 60 Teeth Alternate Tooth Bevel Circular Saw Blade is part of a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking... more

Irwin Marathon 5-1/2 in. Dia. x 10 mm Carbide Circular Saw Blade 24 teeth 1 pc.

Circular Saw Blade stays sharper longer but can be sharpened made of the finest alloy saw steel and precision ground to exacting standards. Irwin tools are made of only the finest materials manufactured to exacting tolerances. more

Irwin Speedbor 1-1/8 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Speedbor Multiple in. Dia. x 6 L Carbon Steel Spade Bit Set 1/4 in. Hex Shank 5 pc.

Blue groove point and cutting edge for faster chip removal double cutting spurs scribe the outside of the hole reducing breakout grooved Hex shank prevents slipping in drill chuck or bit extension 10 percent larger shank for added durability set... more

Irwin Marathon 7-1/4 in. Dia. x 5/8 in. Steel Circular Saw Blade 120 teeth 1 pc.

The Irwin Marathon Vinyl-Siding Circular Saw Blades are made with a symmetric 60 degree angle tooth design to help eliminate chipping and cracking for a fast smooth finish when pushing or pulling through the cut. The innovative heat vent and expansion... more

Irwin Speedbor 1-1/4 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Marples 12 Dia. x 5/8 in. Carbide Woodworking Circular Saw Blade 60 teeth 1 pc.

The Irwin Tools 1807383 Marples Laser Cut 12 inch 60 Teeth Alternate Tooth Bevel Circular Saw Blade is part of a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking... more

Irwin Marathon 8-1/4 in. Dia. x 5/8 in. Carbide Miter and Table Saw Blade 24 teeth 1 pc.

400 grit diamond ground teeth for smooth finish Alternate top bevel grind. Precision tensioned and balanced for true cut Construction grade carbide teeth for longer life. Thin kerf for fast cuts. more

Irwin Marathon 6-1/2 in. Dia. x 5/8 in. Carbide Circular Saw Blade 40 teeth 1 pc.

Circular Saw Blade stays sharper longer but can be sharpened made of the finest alloy saw steel and precision ground to exacting standards. Irwin tools are made of only the finest materials manufactured to exacting tolerances. more

Irwin 1/4 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 7/32 in. Hex Shank 1 pc.

Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter producing a... more

Irwin Speedbor 1-3/4 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Speedbor 2-9/16 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more